Search results: “motor” – Page 16
Showing 721–768 of 1355 results
-
-
Drone Frame and Accessories
Tarot X8 Suspension Motor Mount/Red – TL8X011
SKU: R111334- CF fix plate: 62x52x1.6MM
- Metal motor mount: 105x52x10MM
- Hex collar screw: M3x11.5MM
- Hex step screw: M2x6MM
- Φ3.2 hex damper ring: 7x8MM
- Plastic upper mount: 20×19.5x13MM
- Plastic downer mount: 10×19.5x13MM
SKU: R111334 -
Drone Frame and Accessories
Tarot 25MM Motor Mount Multicopter/ Orange – TL9602
SKU: R111371- Pure carbon fiber plate for ESCÂ 62×29.3×1.3MM
- Pure carbon fiber adapter for motor 52x45x2.0MM
- 25MM metal motor mount 92.5x48x27MM
- M3x10MM cup head hexagonal collar screw
- M2.5×6.5 hexagonal stepped screw
- M2x6MM flat hexagonal screw
SKU: R111371 -
-
Stepper Motor Drivers
A4988 Stepper Motor Driver Controller Board- RED
SKU: 699614- Compact size, easy to install and use.
- All jumpers hit the ON position to indicate 16 subdivisions (4988) or 32 subdivisions (8825).
- Jm connection motor: Jv Connects 5V and 12V-24V Power Supply.
- E /S /D /G of Jc corresponds to Enable /Step /Dir /Gnd driving signal output on the connection respectively.
SKU: 699614 -
-
-
Refurbished & Partial Working, Refurbished, Refurbished EBike parts, E-Wheelchair Motors
Refurbished – 36V 450W MY1020Z EBIKE Brushless Motor
Refurbished & Partial Working, Refurbished, Refurbished EBike parts, E-Wheelchair MotorsRefurbished – 36V 450W MY1020Z EBIKE Brushless Motor
SKU: R110894- Model: MY 1020Z
- Rated Voltage : Â 36 V DC
- Output Power: 450W.
- Speed: DCÂ 2700RPM
- Full Load Current: 21.40 Amp.
- Torque: 1.80 N.m.
- Efficiency: 78%.
SKU: R110894 -
Stepper Motor Drivers
ULN2003A Driver Module Stepper Motor Driver Board
SKU: 312977- ULN2003A motor driver chip
- Chip all the pins already leads for easy connection to use
- 5-12V power supply
- 4-way signal indicator
- Step angle: 5.625 x 1 / 64
- Reduction ratio: 1 / 64
- Phase: 4
- Current / Phase: 5V
SKU: 312977 -
Fuses with Leads
Waveshare DDSM210 Direct Drive Servo Motor, Low Speed & High Torque, Low Noise, All-In-One Design, Hub Motor, Suitable For RC Car Robot DIY
Fuses with LeadsWaveshare DDSM210 Direct Drive Servo Motor, Low Speed & High Torque, Low Noise, All-In-One Design, Hub Motor, Suitable For RC Car Robot DIY
SKU: R112116- Product: DDSM210 Direct Drive Servo Motor
- Rated speed: 98rpm
- Rated torque: 0.25Nm
- Operating temperature: -25~45℃
- Rated current: 1.1A
SKU: R112116 -
Stepper Motor Drivers
Nema17/23 Stepper Motor Driver MKS OSC PWM Pulse Signal Generator Module Motor Speed Frequency Direction Control Regulator
Stepper Motor DriversNema17/23 Stepper Motor Driver MKS OSC PWM Pulse Signal Generator Module Motor Speed Frequency Direction Control Regulator
SKU: 1645768- Signal type: PWM/ Pulse
- Frequency range: high 5.4k-160khz, medium 540-16.6khz and low 80-2.4khz
- Direction: clockwise / counterclockwise
- Voltage: 8v-24v
- Color: black
- Material: PC + metal
- Dimensions: 58×38.6mm
SKU: 1645768 -
Pololu Motor Drivers
Pololu MP6500 Stepper Motor Driver Carrier, Potentiometer Current Control
SKU: 1607675- Built-in regulator (no external logic voltage supply needed)
- Can interface directly with 3.3Â V and 5Â V systems
- Over-temperature thermal shutdown, over-current shutdown, short circuit protection, and under-voltage lockout
- 4-layer, 2Â oz copper PCB for improved heat dissipation
SKU: 1607675 -
-
-
Other Metal Geared Motors
45RPM 12V Low Noise Dc Motor With Metal Gears – Grade A
SKU: 1137803- The metal gears have better wear and tear properties.
- The gearbox is sealed and lubricated with lithium grease and requires no maintenance.
- Although the motor gives 45 RPM at 12V, the motor runs smoothly from 4V to 12V and gives a wide range of RPM, and torque.
- The shaft has a hole for better coupling.
- Operating Voltage(V): 12
- Rated Torque(kg-cm): 4.2
- Stall Torque(kg-cm): 16
SKU: 1137803 -
-
Other Metal Geared Motors
10RPM 12V Low Noise DC Motor With Metal Gears – Grade A
SKU: 1137797- The metal gears have better wear and tear properties.
- Gearbox is sealed and lubricated with lithium grease and requires no maintenance.
- Although motor gives 10 RPM at 12V, motor runs smoothly from 4V to 12V and gives the wide range of RPM, and torque.
- The shaft has a hole for better coupling.
- Operating Voltage(V): 12
- Rated Torque(kg-cm): 7
- Stall Torque(kg-cm): 28
SKU: 1137797 -
Other Metal Geared Motors
3.5RPM 12V Low Noise Dc Motor With Metal Gears – Grade A
SKU: 1137802- The metal gears have better wear and tear properties.
- Gearbox is sealed and lubricated with lithium grease and requires no maintenance.
- Although motor gives 13.5 RPM at 12V, motor runs smoothly from 4V to 12V and gives the wide range of RPM, and torque.
- The shaft has a hole for better coupling.
- Operating Voltage(V): 12
- Rated Torque(kg-cm): 15.7
- Stall Torque(kg-cm): 52
SKU: 1137802 -
Other Metal Geared Motors
30RPM 12V Low Noise Dc Motor With Metal Gears – Grade A
SKU: 1137801- The metal gears have better wear and tear properties.
- The gearbox is sealed and lubricated with lithium grease and requires no maintenance.
- Although the motor gives 30 RPM at 12V, the motor runs smoothly from 4V to 12V and gives a wide range of RPM, and torque.
- The shaft has a hole for better coupling.
- Operating Voltage(V): 12
- Rated Torque(kg-cm): 5.7
- Stall Torque(kg-cm): 18
SKU: 1137801 -
-
-
-
Pololu Motor Drivers
Pololu BD65496MUV Single Brushed DC Motor Driver Carrier
SKU: 1607669- Under-voltage lockout on the logic supply and protection against over-temperature
- Carrier board adds reverse-voltage protection on the motor supply
- Compact size (0.6″×0.6″)
- Built-in under-voltage and over-temperature protection
SKU: 1607669
