Drone Parts
Showing 289–336 of 1748 results
-
Drone Transmitter and Receiver
FlySky FS-GR3E 2.4G 3CH Receiver
SKU: 235939- Reliable, interference-free 2.4GHz AFHDS signal operation
- This 3CH receiver is very easy to bind, very fast link-up, strong signal distance
- Quick and extremely stable in performance
- 3 channels for RC models such as cars, trucks, buggy, boats
- Suitable for GT3B/GT2/GT3C transmitter
SKU: 235939 -
-
Drone Accessories
5V/6V 3A Switch-Mode Ultimate BEC – Voltage Regulator
SKU: 22179- Shows the working status with an indicator (LED), lights when the output is in the normal range
- Output Voltage: 5V or 6V (Changeable with an output-voltage select switch)
- Continuous output current: 3 Amps
- Input: 5.5V-23V (2-6 cells lithium Poly.battery pack or 5-15 cells NiMH / NiCd battery)
SKU: 22179 -
Drone Accessories, Flight Controller & Accessories
SP RACING F3 FC Replacement Accessories Set
SKU: 58032Accessories compatible with SP RACING F3 Flight Controller Module
High-quality cable and connectors.
1 x 3*8 Burg connector(Straight)
1 x 3*8 Burg connector(Right-angle)
1 x 1*10 Burg Connector(Straight)
2 x 2pt cable
2 x 4pt cable
2 x 8pt cableSKU: 58032 -
Drone Transmitter and Receiver
FS-RX2A Pro Radio Receiver
SKU: 57666- Item name: FS-RX2A Radio receiver
- Channel: 10
- RF Range: 2.408-2.475GHZ
- Number of bands: 135
- RX Sensitivity: -92dBm
- 2.4GHz protocol: AFHDS 2A
- Signal output: IBUS, PPM
- Compatible Transmitter: All AFHDS 2A Transmitter,
- Ex.: FS-I6, FS-I6X, FS-I6S, FS-TM8, FS-TM10, FS-I10.
SKU: 57666 -
-
-
-
-
-
-
-
-
Flight Controller & Accessories
F3 Brushed Flight Control Board Based On SP RACING F3 EVO Brush for Micro FPV Frame
Flight Controller & AccessoriesF3 Brushed Flight Control Board Based On SP RACING F3 EVO Brush for Micro FPV Frame
SKU: 45650- Supported Receiver Input Signal: PPM, SBUS, DSM
- Support PPM, SBUS, DSM receiver input signal
- Battery voltage detection and buzzer interface
- Run on SP RACING F3 EVO firmware 32 brush flight control
- Large current NMOS transistors, operating current can reach 10A or higher
- Use STM32F303CCT6 + MPU6500, advanced hardware platform F3 for higher flight stability
SKU: 45650 -
-
-
-
-
-
(ESC) Drone Speed Controller
DYS Quanum 30A Multi-Copter Brushless Speed Controller Programmable with 5V/3A (Original)
(ESC) Drone Speed ControllerDYS Quanum 30A Multi-Copter Brushless Speed Controller Programmable with 5V/3A (Original)
SKU: 867292- Product: Quanum 30A Multi-Copter Brushless Speed Controller
-
Running current: 30A(Output: Continuous 30A, Burst 40A up to 10 Secs.)
-
 Input Voltage: DC 6-16.8V(2-4S Lixx)
-
 With SimonK updated firmware for Multi-Copter
SKU: 867292 -
-
-
-
-
-
-
Drone Motor
Dys D3536-5 1450KV Bldc Motor
SKU: 1115427- Battery: 2~4 Cell /7.4~14.8V
- RPM: 1450kv
- Max current: 45A
- No-load current: 3.5A
- Max power: 655W
- Internal resistance: 0.023 ohm
- Weight: 102g (including connectors)
- Diameter of shaft: 5mm
- Dimensions: 35x36m
- Prop size: 7.4V/9×6 14.8V/8×4
- Max thrust: 1380g
- Pole Count:Â 12
SKU: 1115427 -
Flight Controller & Accessories
Mini OSD for Pixhawk Flight Controller
SKU: 57684- ATmega328P with Arduino bootloader
- MAX7456 monochrome on-screen display
- FTDI cable compatible pinout
- Standard 6 pin ISP header
- 2 independent power sections with an LED indicator on each
- Solder jumpers for combining the power sections
Compatible flight controller:
APM2.5/2.6/2.8
Pixhawk PX4SKU: 57684 -
-
-
Drone Frame and Accessories
CC3D NAZE32 F3 Power Distribution Board PDB With LC Filter & Dual BEC
SKU: 134760- BEC output: 5V12V3A band filter
- Input Voltage: 2-6S(MAX: 3A)
- Weight: 9 gm(with connector)
- Latest UBEC, LC Filter
- Integrated filter circuit boards, more stable, make FPV further and clearer
- Compatible with CC3D/Naze32/F3 flight controller
- Slim design, lightweight, and easy to use
SKU: 134760 -
-
FPV Cameras
1000TVL 90 degree CMOS Camera
SKU: 45649- Working voltage range: 4.5V-6V DC.
- Viewing Angle: 90 degrees.
- Horizontal Resolution: 1000TVL.
- Image Sensor: 1/3″ CMOS.
- Pixels: 1280 x 720.
- Minimum Illumination: 0.05LUX/F1.2.
- White Balance: Automatic.
- Gain: Automatic.
- Digital Noise Reduction: Yes (2D).
- Gamma Correction: 0.45.
- S/N Ratio: ≥50dB.
SKU: 45649 -
Drone Frame and Accessories
Q250 Quadcopter Strong Carbon Fiber 3mm Arm FPV Racing Frame(250mm) Kit
SKU: 32643- Wheelbase: 250mm
- Material: Full Carbon Fiber
- Weight: 160 gm
- The arm equips dampers for the safe landing.
- The arm has multiple motor mounting holes.
- Equips vibration-free mounting bracket for FPV camera.
SKU: 32643
