Flight Controller & Accessories
Showing 97–144 of 180 results
-
-
-
Flight Controller & Accessories
Holybro Kakute F4 V2.4 Stacks + Tekko32 F4 Metal 4in1 65A ESC
SKU: 1777620- Model: Holybro Kakute F4 V2.4 Stacks + Tekko32 F4 Metal 4in1 65A ESC
- Fast F4 MCU: operating at 150MHz.
- PWM Frequency Range: Supports PWM frequencies ranging from 16k to 96k.
- Metal-Cased MOSFET: metal-cased MOSFET for efficient heat dissipation.
- On-Board Capacitance: on-board capacitance at 2068uF for effective noise filtering, enhancing signal quality.
- 3 oz Copper PCB Design
- Separate Drive & Control Circuit
SKU: 1777620 -
-
Flight Controller & Accessories
Holybro Tekko32 F4 4in1 Mini 50A ESC
SKU: 1777636- Model: Holybro Tekko32 F4 4in1 Mini 50A ESC
- Dimensions: 32 x 40 mm
- Supports DShot 150/300/600/1200/2400.
- Compatible with MultiShot, OneShot, Proshot, PWM, etc.
- ESC telemetry supported for enhanced monitoring.
SKU: 1777636 -
Flight Controller & Accessories
Holybro Kakute F4 V2.4 Stacks + Tekko32 F4 4in1 50A ESC
SKU: 1777617- Model: Holybro Kakute F4 V2.4 Stacks + Tekko32 F4 4in1 50A ESC
- New and faster F4 MCU @ 150Mhz (compared to F3 @108Mhz & F0 @48Mhz)
- PWM Frequency: 16k to 96k
- 1000uf 35v capacitor included (highly recommended for 6s setup)
- Amperage meter scale ratio: 120 (V1.9 Version)
SKU: 1777617 -
Flight Controller & Accessories
Holybro Pixhawk 6C Aluminium Body (NO GPS NO Power Module)
SKU: 1792279- Model: Holybro Pixhawk 6C Aluminium Body (NO GPS NO Power Module)
- High-performance H7 Processor with clock speed up to 480 MHz
- New cost-effective design with low-profile form factor
- Redundant inertial measurement unit (IMU) from Bosch® & InvenSense®
- Newly designed integrated vibration isolation system to filter out high-frequency vibration and reduce noise to ensure accurate readings
- IMUs are temperature-controlled by onboard heating resistors, allowing optimum working temperature of IMUs
SKU: 1792279 -
Flight Controller & Accessories
Holybro PM08 Power Module (14S, 200A)
SKU: 1777629- Model: Holybro PM08 Power Module (14S, 200A)
- Support 2S – 14S Battery
- 200A Cont. Current Rating
- Easy to Setup
- Aluminum Case for Heat dissipation
- Dimensions: 101*45*26mm
- Mounting hole: 79mm*38.1mm
- Weight: 151g
SKU: 1777629 -
Flight Controller & Accessories
Holybro Pix32 V6 FC Module Only
SKU: 1812213- High-performance STM32H743 Processor with more computing power & RAM
- New cost-effective design with the low-profile form factor
- A newly designed integrated vibration isolation system to filter out high-frequency vibration and reduce noise to ensure accurate readings
- IMUs are temperature-controlled by onboard heating resistors, allowing the optimum working temperature of IMUs
SKU: 1812213 -
Flight Controller & Accessories
Holybro Pixhawk PWM Cable for Tekko32 4in1 ESC (GHR 10 Pin)
SKU: 1735923- Product: Pixhawk PWM Cable for Tekko32 4in1 ESC
- For Use With: Pixhawk 4, Pixhawk 6C, Pixhawk 6X/5X with Mini Baseboard
- Cable Length (cm): 20
- Connector: JST GHR 10Pin to JST SHR 8Pin
- Cable Size (AWG): 28
SKU: 1735923 -
Flight Controller & Accessories
Holybro Pixhawk PWM Cable for Tekko32 4in1 ESC (2.54 mm Dupont)
SKU: 1735921- Product: Pixhawk PWM Cable for Tekko32 4in1 ESC
- For Use With: Durandal, Pixhawk 32 v6 & V5, Pixhawk 4 Mini, Pixhawk 6C Mini, Pixhawk 6X/5X Standard
Baseboard or RPI CM4 Baseboard - Cable Length (cm): 20
- Connector: 2.54mm Dupont to JST SHR 8Pin
- Cable Size (AWG): 28
SKU: 1735921 -
Flight Controller & Accessories
Holybro Kakute H743 Wing Flight Controller with Micro M10 GPS Module
SKU: 1720323- MCU: STM32H743, 480 MHz, 1MB RAM, 2MB Flash
- IMU: ICM-42688P (SPI3)
- Baro: BMP280 (I2C4)
- OSD: AT7456E (SPI2)
- Blackbox: MicroSD card slot on SDMMC2
- 7x Uarts (1,2,3,5,6,7,8) with built-in inversion.
SKU: 1720323 -
-
-
-
-
Flight Controller & Accessories
CUAV X7+ Pro Flight Controller | Autopilot For PX4 APM Drone Quadcopter Pixhawk Drop Shipping
Flight Controller & AccessoriesCUAV X7+ Pro Flight Controller | Autopilot For PX4 APM Drone Quadcopter Pixhawk Drop Shipping
SKU: 1505165- Main FMU Processor: STM32H743
- Power: 4.5~5.4V
- Weight: 105 g
- 14 PWM outputs (12 support Dshot)
- Support multiple RC inputs (SBUs/CPPM/DSM)
- 2 GPS ports(GPS and UART4 ports)
- 6 i2c buses(Four i2c dedicated ports)
SKU: 1505165 -
-
Flight Controller & Accessories
CUAV X7+ Flight Controller | Autopilot For PX4 & APM Drone Hardware
SKU: 1504857- Main FMU Processor: STM32H743
- Power: 4.5~5.4V
- Weight: 101 g
- 14 PWM outputs (12 support Dshot)
- Support multiple RC inputs (SBUs/CPPM/DSM)
- 2 GPS ports(GPS and UART4 ports)
- 6 i2c buses(Four i2c dedicated ports)
SKU: 1504857 -
-
Flight Controller & Accessories
CUAV C-RTK 9Ps Positioning Module | High Precision GPS RTK GNSS Pixhawk
Flight Controller & AccessoriesCUAV C-RTK 9Ps Positioning Module | High Precision GPS RTK GNSS Pixhawk
SKU: 1504851- Centimeter-level positioning for industrial UAV
- 10s switch RTK mode
- 20Hz high-frequency RTK navigation refresh rate
- <10s shorter convergence time
- 2 x 9Ps modules serve as a GPS
- PX4 and Ardupilot dual-platform compatible
- Universal Type-C interface adopted on both mobile/ground end, switch freely
SKU: 1504851 -
Flight Controller & Accessories
CUAV CAN PDB Multifunctional Autopilot Baseboard
SKU: 1504849- Support 10~62V ultra-wide voltage input
- Continuous current: 180A
- Accurately measure voltage and current, current accuracy within 110A is 0.1A, voltage accuracy is 0.05V
- 14 servo channel output
- Dual regulated output interface: It can provide up to 5V/6A, 12V/4A power output for peripherals
- Ultra-thick copper and thick tin-plated PCB can effectively reduce the heating caused by the internal resistance of the circuit under high current.
SKU: 1504849 -
Flight Controller & Accessories
CUAV V6X Flight Controller
SKU: 1590285- H7 Double-precision floating-point processor
- High-performance ARM M3 coprocessor
- Low-noise Car-grade IMUs
- Triple redundant IMUs and dual redundant barometer designs
- Car-grade RM3100 magnetic compass
- New built-in shock absorption design
SKU: 1590285 -
Flight Controller & Accessories
CUAV HV_PM Power Module for V5+ | 10-60V Pixhack Pixhawk XT60 Plug For RC Drone FPV
Flight Controller & AccessoriesCUAV HV_PM Power Module for V5+ | 10-60V Pixhack Pixhawk XT60 Plug For RC Drone FPV
SKU: 1504852- Hold more high input voltage: 10v-60v (3s ~ 14s battery)
- Voltage detection accuracy: + – 0.1v
- Current detection accuracy: + – 0.2aA
- Support higher power port output current: 5A
- Maximum (detection) current: 60A
SKU: 1504852 -