Sensors Modules
Showing 97–144 of 1608 results
-
-
Rotary Encoder
OE-775 Hall Effect Two Channel Magnetic Encoder
SKU: 302048This encoder is featured and developed for the series of Orange planetary DC gear motors. The encoder are tested for its precise output and robustness in all electronic as well as environmental parameters listed. So If you wish to add feedback to older or new gear motors this encoder will do the trick as long as your Motor has a long back shaft.
SKU: 302048 -
IMU, Accelerometer, Magnetometer & Gyroscope
ADXL335 Module 3-axis Analog Output Accelerometer
SKU: 12231- Onboard LDO Voltage regulator
- Can be interfaced with 3V3 or 5V Microcontroller.
- Tap/Double Tap Detection
- Free-Fall Detection
- Analog output
- Build in ultra low noise linear LDO voltage regulator
- Built-in onboard filters, which reduce noise from the motor and other high current electronics
- Power LED
SKU: 12231 -
Sound Sensor
Sound Detection Module Sensor for Intelligent Vehicle Compatible With Arduino
SKU: 11584- Main chip: LM393, Electret condenser microphone
- Working voltage: DC 3.3-5V
- Induction distance is 0.5M
- Signal output Indication
- Single channel signal output
- The output effective signal is low level.
SKU: 11584 -
PIR / IR and Optical Sensor
IR Receiving Head VS1838B Remote Control Receiver – 5pcs
SKU: 44426- Internal filter for PCM frequency.
- Inner shield, good anti-interference ability.
- High immunity against ambient light.
- Improved shielding against electric field disturbance
- 3.0V or 5.0V supply voltage; low power consumption.
- TTL and CMOS compatibility.
- Suitable transmission code:NEC code,RC5 code.
- Universal receiver. 38 KHz.
- Infrared remote control receiver.
SKU: 44426 -
Other Measuring Instrument, Temperature & Humidity Sensor
GM320 Non-Contact Infrared (IR) Handheld Temperature Meter
Other Measuring Instrument, Temperature & Humidity SensorGM320 Non-Contact Infrared (IR) Handheld Temperature Meter
SKU: 45667- Temperature range: -50 to 330°C
- Accuracy: ±1.5% or ±1.5°C
- Resolution: 0.1°C or 0.1°F
- Repeatability: 1% of reading or 1°C
- Supply Voltage: 3V DC (2 x AAA Battery)
SKU: 45667 -
Thermoelectric Peltier Elements
12V PTC Heaters Heating Element Hair Dryer Accessories Curlers Heater 220 Degree Celsius Air Heater
Thermoelectric Peltier Elements12V PTC Heaters Heating Element Hair Dryer Accessories Curlers Heater 220 Degree Celsius Air Heater
SKU: 975673- Heating Material: PTC Thermistor
- Shell Material: Aluminum
- Lead wire: Silicone Line
- Voltage: 12V
- Power: 30W
- Surface Dry Heating Temperature: 220ºC
SKU: 975673 -
-
Temperature & Humidity Sensor
PT1000-S Waterproof 1m 30mm Stainless Steel Pole Probe Temperature Sensor
Temperature & Humidity SensorPT1000-S Waterproof 1m 30mm Stainless Steel Pole Probe Temperature Sensor
SKU: 43887- Model number: FTARP05 series.
- Mounting form Polish rod probe
- The Probe material: Stainless steel.
- Probe diameter: 4mm.
- Length of the probe: 30mm.
- Cabel material Silver plated copper (not insulated), PTFE Silver plated copper (Waterproof, insulated).
- Accuracy ±(0.3°C+0.5%|t|).
- Thermal response time: <0.5 sec.
SKU: 43887 -
Sound Sensor
LM393 Sound Detection Sensor Module – Black
SKU: 44108- Working voltage: DC 3.3-5V.
- IC Chip: LM393
- Signal output indication.
- The output is digital.
- Single channel signal output.
- With the retaining bolt hole, convenient installation.
- Output low level and the signal light when there is sound.
SKU: 44108 -
Load / Pressure / Force / Flex Sensor
Weighing Load Cell Sensor 5kg YZC-131 With Wires
SKU: 28646- Model: YZC-131A
- Dimensions: 75 x 13 x 13 mm (L x W x H)
- Range: 5 kg
- Cable Length: 18 cm
- Fitting ScrewHole Size:Â M3
- Rated output: 1.0 0.1mV / V
- Nonlinear: 0.05% F.S
- Hysteresis: 0.0% F.S
- Repeatability: 0.05% F.S
SKU: 28646 -
Temperature & Humidity Sensor
Flame Sensor infrared Receiver Ignition source detection module
SKU: 12249- Output Channel: 1
- Power Supply: 3.3/5V
- Built in a potentiometer for sensitivity control.
- Onboard signal output indication, output effective signal is high, at the same time the indicator light up, the output signal can directly connect to microcontroller IO.
- Detection angle about 60 degrees, the flame spectrum especially sensitive.
- The flame of the most sensitive sensors flame, the regular light is also a response, generally used for fire alarm purposes.
SKU: 12249 -
-
IMU, Accelerometer, Magnetometer & Gyroscope
GY-271 HMC5883L 3-axis Electronic Compass Module Magnetic Field Sensor – Original Chip
IMU, Accelerometer, Magnetometer & GyroscopeGY-271 HMC5883L 3-axis Electronic Compass Module Magnetic Field Sensor – Original Chip
SKU: 42869- 3-axis magnetic electronic compass.
- Precise heading information.
- Operating Voltage:Â 3 -5 V DC.
- Driver Chip:Â HMC5883L.
- Communication:Â I2C protocol.
- Measuring range: ± 1.3-8 Gauss.
SKU: 42869 -
-
Sound Sensor
ISD1820 Recording Module Voice Board With On Board Mic and Loud Speaker
SKU: 43800- The main chip: ISD1820.
- Operating Voltage:Â DC 3V-5V.
- Loudspeaker: 8Ω, 0.5W.
- An easy to use 10 seconds of voice recording.
- High-quality, natural voice restored.
- Can be used as a propaganda module.
- With looping, jog playback, single-pass play function.
SKU: 43800 -
RFID card, Tags & Reader
PN532 NFC RFID Read / Write Module V3 Kit
SKU: 699611- Module Size: 42.7mm x 40.4mm x 4mm
- Easy to change mode: with a small SMD toggle Switch, it becomes very easy to change among IIC, SPI and HSU modes
- Longer distance: the reading distance becomes 5~7cm, compared with 4~6 cm of last version
- Built in PCB Antenna, with 5cm~7cm communication distance
- On-board level shifter, Standard 5V TTL for I2C and UART, 3.3V TTL SPI
- Work as RFID reader/writer
- Work as 1443-A card or a virtual card
SKU: 699611 -
-
RFID card, Tags & Reader
White Blank Waterproof 125KHz T5577 EM4305 Reproducible RFID ID Tag
SKU: 1794705- Response Frequency: 125Khz
- Chip type: EM4305
- Designed for the RFID 125KHZ duplicator. can copy all the ID card, such as Access Card, District Card, Parking etc.
- Reprogrammable: No
- Product dimensions (mm): 35 x 27 x 4
SKU: 1794705 -
-
PIR / IR and Optical Sensor
HC-SR505 Mini Infrared PIR Motion Sensor Infrared Detector Module
SKU: 28673- Automatic induction: to enter the sensing range
- Ultra-small size.
- Repeatable trigger
- Wide operating voltage range
- Micropower: quiescent current <50
- Output high signal: easy docking and all kinds of circuits.
SKU: 28673 -
RFID card, Tags & Reader
Black Blank Waterproof 125KHz T5577 EM4305 Reproducible RFID ID Tag
SKU: 1794678- Material: ABS
- Dimension(LxWxH): 43.7×30.5×5.3mm
- Response Frequency: 125Khz
- Chip type: EM4305
- Designed for the RFID 125KHZ duplicator. can copy all the ID card, such as Access Card, District Card, Parking etc.
SKU: 1794678 -
Orange Proximity Sensor
Orange 8mm NPN Inductive Proximity Sensor RM18 DC6~36V (Unshielded)
SKU: 650673- Operating Voltage (VDC): 6 ~ 36.
- Detection Distance (mm): 8.
- Outer Thread Size: M18.
- Object Type: Inductive.
- Output Type: NPN Normally Open Three-line.
- Installation Type: Non-Flush (Unshielded).
- Max Output Current: 200 mA.
- Setting Distance (mm): 0 ~ 5.6.
SKU: 650673 -
Load / Pressure / Force / Flex Sensor
Weighing Load Cell Sensor 1Kg for Electronic Kitchen Scale YZC-131 With Wires
Load / Pressure / Force / Flex SensorWeighing Load Cell Sensor 1Kg for Electronic Kitchen Scale YZC-131 With Wires
SKU: 28623- Weighing Range: 0 ~ 1 kg.
- Rated Output: 1.0 ± 0.1mV / V.
- Non Linear Output: ± 0.03% F.S.
- Input Impedance: 1066 ± 10% Ω.
- Output Impedance: 1000 ± 10% Ω.
- Insulation Resistance: 2000 MΩ.
SKU: 28623 -
RFID card, Tags & Reader
Yellow Blank Waterproof 125KHz T5577 EM4305 Reproducible RFID ID Tag
SKU: 1794710- Dimension(LxWxH): 35 x 27 x 4
- Response Frequency: 125Khz
- Chip type: EM4305
- Designed for the RFID 125KHZ duplicator. can copy all the ID card, such as Access Card, District Card, Parking etc.
SKU: 1794710 -
RFID card, Tags & Reader
Blue Blank Waterproof 125KHz T5577 EM4305 Reproducible RFID ID Tag
SKU: 1794680- Material: ABS
- Dimension(LxWxH): 43.7×30.5×5.3mm
- Response Frequency: 125Khz
- Chip type: EM4305
- Designed for the RFID 125KHZ duplicator. can copy all the ID card, such as Access Card, District Card, Parking etc.
SKU: 1794680 -
RFID card, Tags & Reader
Green Blank Waterproof 125KHz T5577 EM4305 Reproducible RFID ID Tag
SKU: 1794693- Material: ABS
- Dimension(LxWxH): 43.7×30.5×5.3mm
- Response Frequency: 125Khz
- Chip type: EM4305
- Designed for the RFID 125KHZ duplicator. can copy all the ID cards, such as Access Card, District Card, Parking, etc.
SKU: 1794693 -
-
Current and Voltage Sensor, Hall Sensor
ACS758LCB-050B Hall-Effect-Based Linear Current Sensor IC
SKU: 559742- Integrated shield greatly reduces capacitive coupling from the current conductor to die due to high dV/dt signals, and prevents offset drift in high-side, high-voltage applications.
- Total output error improvement through gain and offset trim over temperature.
- Small package size, with easy mounting capability.
- Monolithic Hall IC for high reliability.
- Output voltage proportional to AC or DC currents.
- Factory-trimmed for accuracy.
- Extremely stable output offset voltage.
- Nearly zero magnetic hystereses.
SKU: 559742 -
Biometric/ECG/EMG Sensor
Heart Beat Pulse Sensor Amped
SKU: 18591- A Color-Coded Cable, with a standard male header connectors. Plug it straight into an Arduino or a Breadboard. No soldering is required.
- The Pulse Sensor has 3 holes around the outside edge which make it easy to sew it into almost anything.
- Visualization software (made in Processing) to instantly see the output of the sensor and for troubleshooting.
SKU: 18591 -
-
Gas and Dust Sensor
MQ-7 CO Carbon Monoxide Coal Gas Sensor Module
SKU: 44007- Operating voltage: DC 5 V.
- The analog output voltage, the higher the concentration the higher the voltage.
- The carbon monoxide detection with better sensitivity.
- With a long service life and reliable stability.
- Rapid response and recovery characteristics.
- Range: 10 to 1000 ppm.
SKU: 44007 -
Water TDS, pH, Flow, Level and Pressure Sensor
YF-S201 Water Flow Measurement Sensor with 1-30Liter/min Flow Rate – White
Water TDS, pH, Flow, Level and Pressure SensorYF-S201 Water Flow Measurement Sensor with 1-30Liter/min Flow Rate – White
SKU: 12219- Working Voltage: 5 to 18V DC (min tested working voltage 4.5V).
- Max current draw: 15mA @ 5V.
- Working Flow Rate: 1 to 30 Liters/Minute.
- Maximum water pressure: 2.0 MPa.
- Flow rate pulse characteristics: Frequency (Hz) = 7.5 * Flow rate (L/min).
SKU: 12219