Generic
Showing 913–960 of 6083 results
-
-
FPV Cameras
600TVL 170 Degree Mini FPV AV Camera with Audio for Mini 200 250 300 Drone
SKU: 29392- Power supply range: 3.7-5V 100mA
- Resolution: 1280 x 960
- Resolution: 600TVL
- Illumination: 0.5LUX
- Format: PAL / NTSC
- Audio Lens: Wide-angle 1.8mm (170º)
- Image sensor:1/4 CMOS image sensor
- Sensitive area: 3.5964mm x 2.7084mm
- Size of the lens: M10
SKU: 29392 -
3D Printer Extruder Parts and Fans, Cooling Fans
Small 5V 140mA Turbo Air Intake Fan (Size: 40x40x20mm)
3D Printer Extruder Parts and Fans, Cooling FansSmall 5V 140mA Turbo Air Intake Fan (Size: 40x40x20mm)
SKU: 52674- Operating Voltage: 5V DC
- Operating Current: 140mA
- Normal Operating Temperature: 25°C-45°C.
- Weight: 26 gm.
- Life Expectancy: Dual Ball Bearing: 50000 hours.
- Sleeve Bearing: 20000-25000 hours.
- Reliable quality as well as Competitive price.
- Large volume flow and long life expectancy.
- High speed and large airflow.
- Low noise and high efficiency.
SKU: 52674 -
-
3D Printer Motor Drivers
DM556 Digital Stepper Motor Driver for CNC Drivers Controller 3D Printer Accessories
3D Printer Motor DriversDM556 Digital Stepper Motor Driver for CNC Drivers Controller 3D Printer Accessories
SKU: 1150743- Â Maximum current: 7.2A, resolution: 0.1A
- Â Impulse response frequency: 200KHz
- Â DC power supply
- Â The input voltage range: 20-50 VDC.
- Â Power supply is greater than 200W. Recommend 20-50 VDC
-  Operating Temperature: -10℃~45℃
SKU: 1150743 -
-
Battery Pack Accessories & Holders
3 x 21700 Battery Holder with 21.2MM Bore Diameter
SKU: 1187462- Model: 21700 radiating battery spacer.
- Material: ABS/PC (Remarkable Flame Retardant Plastic).
- Bore Diameter: 21.2MM
- Combined them into many different sizes and shapes of the battery pack.
- Application: Design for Radiating Complex Battery Packs. Safe and Stable, Perfect Build for eBike!
SKU: 1187462 -
-
-
Relay Modules
12V 4 Channel Relay Module
SKU: 618377- 4-Channel Relay interface board and each one needs 15-20mA Driver Current.
- Both controlled by 12V and 5V input Voltage.
- Equipped with high-current relay, AC250V 10A ; DC30V 10A.
- Standard interface that can be controlled directly by microcontroller (Arduino, 8051, AVR, PIC, DSP, ARM, ARM, MSP430, TTL logic active low).
- Indication LED’s for Relay output status.
SKU: 618377 -
Boost Converter
2.8V-5.5V to ±12V DC Conversion Power Module
SKU: 1150671- Product: DC Conversion Power Module
- Input Voltage Range:2.8V-5.5V
- Output Voltage:+/-12V (V +:+12V;V-:-12V)
- Output Current:+12V stable output current capability of 50mA,-12V stable output current capability 30mA,almost meet all ADC, DAC and amplifier applications
- Size:2.4×1.2cm
SKU: 1150671 -
6S Li-ion BMS
6S 20A Li-ion Lithium Battery 24V 18650 Charger Protection Board Module
SKU: 456509- Charging voltage: 25.5V
- Charging current: 20A (MAX)
- Overcharge detection voltage: 4.28 ± 0.05V
- Overcharge protection delay: 0.1S
- Overcharge release voltage: 4.08 ± 0.05V
- Over discharge detection voltage: 2.55 ± 0.08V
- Overdischarge detection delay: 0.1S
- The overdischarge release voltage: 2.9 ± 0.1V
SKU: 456509 -
-
Current and Voltage Sensor
ACS712 20A Current Sensor IC (ACS712ELCTR-20A-T)
SKU: 618488- 80 kHz bandwidth.
- Total output error 1.5% at TA = 25°C.
- Small footprint, low-profile SOIC8 package.
- 1.2 mΩ internal conductor resistance.
- 2.1 kV RMS minimum isolation voltage from pins 1-4 to pins 5-8.
- 5.0 V, single-supply operation.
- 66 to 185 mV/A output sensitivity.
SKU: 618488 -
Sleeves and Drag Chain
Nylon 20mm Expandable Braided Sleeve for Wire Protection-2M Length
SKU: 457746- Great for wrapping power/ground cable.
- Protect cables from wear & high temperature.
- Prolong the service life of the cable.
- Very easy to bend.
- Ultra expandable (150% of original size).
- Gives an attractive look with a clean install.
- Application: Bundle Wiring of Moving Assembles
SKU: 457746 -
Battery Chargers, Battery Charging Boards
2 x 18650 Lithium Battery Shield V8 Mobile Power Expansion Board Module 5V/3A 3V/1A Micro USB for Arduino ESP32 ESP8266
Battery Chargers, Battery Charging Boards2 x 18650 Lithium Battery Shield V8 Mobile Power Expansion Board Module 5V/3A 3V/1A Micro USB for Arduino ESP32 ESP8266
SKU: 1031024- Output port: USB or expansion port
- Output parameter 5V / 3A or 3.3V / 1A.
- Conversion efficiency up to 95%
- Input port: MICROUSB
SKU: 1031024 -
-
-
-
-
Battery Pack Accessories & Holders
3 X 3 18650 Battery, Holder with 18.5MM, Bore Diameter
SKU: 1121242- Model: 18650 radiating battery spacer.
- Material: ABS/PC (Remarkable Flame Retardant Plastic).
- Bore Diameter: 18.5mm
- Combined them into many different sizes and shapes of the battery pack.
- Application: Design for Radiating Complex Battery Packs. Safe and Stable, Perfect Build for eBike!
SKU: 1121242 -
-