Generic
Showing 193–240 of 6083 results
-
Raspberry Pi Accessories
Micro SD Card to SD Card Adapter2
SKU: 220132- Convert Micro SD Card into SD Card to use in Laptop, Digital Camera, Music Player, Media Player, Photo Frames etc.
- Protect and Secure MicroSD Card from Dust, Damage, Breakage by using this Adapter.
- Secure Data with inbuilt Write Protection Switch.
- Brand New Product and Easy to use.
SKU: 220132 -
-
-
-
-
Thermoelectric Peltier Elements
SP1848-27145 40x40mm Thermoelectric Power Generator TEG 150?C Peltier Module
Thermoelectric Peltier ElementsSP1848-27145 40x40mm Thermoelectric Power Generator TEG 150?C Peltier Module
SKU: 26317- Small and lightweight, convenient for use.
- Designed specifically for power generation.
- Sealed for moisture protection and contain thermal elements formulated for optimum Seebeck power generation.
- High-temperature 120°C, with NM static protection.
- Operating Temperature: 0-150°C
- Maximum Temperature: 150°C
- Open Circuit Voltage: 4.8V
SKU: 26317 -
Straight Type DC BO Motors
100 RPM BO Motor – Straight
SKU: 2154- Low density: lightweight, low inertia.
- Capability to absorb shock and vibration as a result of elastic compliance.
- Ability to operate with minimum or no lubrication, due to inherent lubricity.
- The relatively low coefficient of friction.
- Operating Voltage(VDC): 3~12
- Shaft Length (mm): 8.5
- Shaft Diameter (mm): 5.5 (Double D-type)
- No Load Current: 40-180mA.
- Rated Speed(After Reduction): 100 RPM
- Rated Torque: 1 Kgcm
SKU: 2154 -
-
Buck Converter
DC-DC Step-Down Buck Converter Power Supply Module 24V 12V 9V to 5V 5A 25W Replace LM2596S
Buck ConverterDC-DC Step-Down Buck Converter Power Supply Module 24V 12V 9V to 5V 5A 25W Replace LM2596S
SKU: 395957- This DC-DC Step-Down Buck Converter Power Supply Module provide all the active functions for a step-down (buck) switching regulator, capable of driving a load up to 5A with excellent line and load regulation
- Simple High-Efficiency Step-Down (Buck) Regulator
- Mostly used for On-Card Switching Regulators
SKU: 395957 -
-
-
Boost Converter
Type-C USB 5V 2A Step-Up Boost Converter with USB Charger
SKU: 1031134- Input voltage range: 5-5.5V
- Charging cut-off voltage: (4.2V/4.35V) ±0.5%:
- Charging current: 2.4A±5%
- Boost output voltage: 5V5.15V (wire loss compensation)
- Boost output voltage ripple: 100mV
- Weight:3 gm
SKU: 1031134 -
-
Boards Compatible with Arduino
Pro Mini ATMEGA328P 5V/16M Blue – Standard Version
SKU: 409791- Microcontroller: ATmega328P
- Circuit Operating Voltage: 5V
- Clock frequency: 16MHz.
- 6 PWM port: D3, D5, D6, D9, D10, D11.
- Use For Atmel Atmega328P-AU microcontroller.
- Support serial download.
- Support 9V battery.
- A pair of TTL level serial port transceiver : RX / TX.
SKU: 409791 -
Buck Converter
DC-DC 3A 5V-12V 24V to 12V Step-down Power Supply Module
SKU: 1121293- Max Output Current:12 V
- Maximum Output Current: 3A
- Conversion efficiency: can up to 97.5%
- Switch frequency: 500KHz
- Operating temperature: Industrial grade (-40 ° to + 85 °)
- Improve conversion efficiency
SKU: 1121293 -
Boards Compatible with Arduino
Pro Mini ATMEGA328P 5V/16M (Official Version)
SKU: 11458- Microcontroller: ATmega328
- Circuit Operating Voltage: 5V
- Clock frequency: 16MHz.
- Digital I/O Pins: 14
- 8 analog input port: A0 ~ A7.
- A pair of TTL level serial port transceiver : RX / TX.
- 6 PWM port: D3, D5, D6, D9, D10, D11.
- Support serial download.
SKU: 11458 -
-
Best Prices, Raspberry Pi Case
Aluminum Heat Sink Case with Double Fans for Raspberry Pi 4B – Black
-26%Best Prices, Raspberry Pi CaseAluminum Heat Sink Case with Double Fans for Raspberry Pi 4B – Black
SKU: 896559- Type: Raspberry 4B Aluminum Alloy Metal Case
- Material: Black Aluminum Alloy Metal
- Compatible For:Raspberry PI 4
- Easy to install, Ultra-thin design.
- Open case design with Daul Fans for Fast Heat dissipation.
- Weight: 110gm
SKU: 896559 -
Sound Sensor
INMP441 MEMS High Precision Omnidirectional Microphone Module I2S
SKU: 975775- Digital I2S interface with high precision 24-bit data
- High signal to noise ratio is 61 dBA
- High sensitivity – 26 dBFS
- Stable frequency response from 60 Hz to 15 kHz
- Low power consumption: low current consumption 1.4 mA
- High PSR: -75 dBFS
SKU: 975775 -
-
-
-
-
-
Raspberry Pi Accessories
Raspberry Pi USB Plug and Play Desktop Microphone
SKU: 220369- Advanced digital USB provides superior clarity.
- Simple to operate as a single USB plug-&-play connection.
- Noise-cancelling microphone filters out unwanted background noise.
- Power switch illuminates when the microphone is active.
- Microphone pivots on base to hold the preferred position.
- Flexible neck to adjust your convenient direction and Height for talking.
SKU: 220369 -
PIR / IR and Optical Sensor
HC-SR501 PIR with Jumper at back for trigger
SKU: 783270- Wide Working Voltage Range: DC 4.5V- 20V
- Current Drain:Â <60uA
- Detection Angle: <140°
- Detection Distance: 3 to 7m (can be adjusted)
- Blockade time: 2.5s (Default)
-  Work temperature: -20-+80°C
- Jumper for trigger.
SKU: 783270 -
IMU, Accelerometer, Magnetometer & Gyroscope
MPU6500 Gyroscope/Accelerometer/Digital Motion Processor (DMP) 6-axis Motion Sensor with I2C/SPI Interface
IMU, Accelerometer, Magnetometer & GyroscopeMPU6500 Gyroscope/Accelerometer/Digital Motion Processor (DMP) 6-axis Motion Sensor with I2C/SPI Interface
SKU: 1268025- Acceleration and Gyroscope
- Power Supply: DC3.3V-5V
- Chip: MPU9250
- Size: 22 mm x 17 mm.
- Gyro range : ± 250 500 1000 2000 ° / s
- Acceleration range: ± 2 ± 4 ± 8 ± 16g
- 6 DOF modules
SKU: 1268025 -
-