WAVESHARE
Showing 433–480 of 534 results
-
-
Raspberry Pi Hats
Waveshare Pioneer600 Raspberry Pi Expansion Board
SKU: 968484- Onboard CP2102: USB TO UART converter
- 0.96-Inch OLED Display
- PCF8591 : 8-bit AD/DA converter, I2C interface
- BMP180: pressure sensor, I2C interface
- PCF8574: I/O expansion chip, I2C interface
- DS3231: high precision RTC chip, I2C interface
- LFN0038K IR receiver
SKU: 968484 -
Raspberry Pi Hats
Waveshare Pico-RTC-DS3231 IC Test Board
SKU: 979552- Operating voltage: 3.3V
- Backup battery voltage: 2.3V~5.5V
- Operating temperature: -40°C ~ 86°C
- Real-Time Clock Counts Seconds, Minutes, Hours, Date of the Month, Month, Day of the Week, and Year with Leap-Year
- Optional format: 24-hour OR 12-hour with an AM/PM indicator
- 2x programable alarm clock
SKU: 979552 -
Official Raspberry Pi Accessories, USB Interface Module
Waveshare USB To UART Debugger Module for Raspberry Pi 5, Type-A Port, Onboard UART Connector, High Baud Rate Transmission
Official Raspberry Pi Accessories, USB Interface ModuleWaveshare USB To UART Debugger Module for Raspberry Pi 5, Type-A Port, Onboard UART Connector, High Baud Rate Transmission
SKU: R101190- Host Interface: USB
- Devise interface: UART
- Communication Range: 50bps ~ 6Mbps
- USB Device connector: USB Type-A;
- Protection: self-recovery fuse, ESD protection
- UART interface connector: 6pin right-angle pinheader; 3pin connector
- protection: IO protection diode
SKU: R101190 -
USB Interface Module
Waveshare TTL UART To CAN Mini Module, With TTL And CAN Conversion Protocol, Supports Bi-Directional Transmitting And Receiving
USB Interface ModuleWaveshare TTL UART To CAN Mini Module, With TTL And CAN Conversion Protocol, Supports Bi-Directional Transmitting And Receiving
SKU: R101212- Bidirectional communication between CAN and TTL.
- 14 configurable filters, four operation modes.
- Compliance with CAN 2.0B, ISO 11898-1/2/3 standards.
- Baud rate range: 10kbps to 1000kbps.
- 1000-frame CAN buffer capacity.
- High-speed conversion up to 5000 extended frames per second.
SKU: R101212 -
-
-
-
-
IoT Cameras
Waveshare RS485 CAN Expansion Board for Jetson Nano Digital Isolation Built-In Protection Circuit
IoT CamerasWaveshare RS485 CAN Expansion Board for Jetson Nano Digital Isolation Built-In Protection Circuit
SKU: 1331218- RS485 CAN Expansion Board Designed For Jetson Nano
- Digital Isolation, Built-In Protection Circuit
- Standard 40PIN GPIO extension header
- Reserved control pins, allows to work with other control boards
SKU: 1331218 -
USB Interface Module
Waveshare USB to RS232/485 Serial Converter, Onboard Original FT232RNL Chip
SKU: R101197- Chipset: Original FT232RNL
- Multiple devices applicable
- Multi-OS compatible
- Transmission distance: About 5mOperating voltage: 5V
- Operating Systems: Compatible with Mac, Linux, Android, Windows 11/10/8.1/8/7
SKU: R101197 -
Solar Panels and Controllers
Waveshare Solar Power Manager Module (D), Supports 6V~24V Solar Panel and Type-C Power Adapter, 5V/3A Regulated Output Battery holder Included
Solar Panels and ControllersWaveshare Solar Power Manager Module (D), Supports 6V~24V Solar Panel and Type-C Power Adapter, 5V/3A Regulated Output Battery holder Included
SKU: R101205- Input Voltage: 6V~24V
- Output Voltage: 5V
- Output Current: 3A
- Charging Method: Solar panel or Type-C connector
- Protection Circuits: Over-charge, over-discharge, overheat, over-current
- Charging Indicator: LED indicators for solar panel and battery status
SKU: R101205 -
TFT LCD Displays
Waveshare ESP32-S3 Development Board, 32-bit LX7 Dual-core Processor, Integrates GC9A01 Display Driver Chip, With 1.28inch IPS Round LCD
TFT LCD DisplaysWaveshare ESP32-S3 Development Board, 32-bit LX7 Dual-core Processor, Integrates GC9A01 Display Driver Chip, With 1.28inch IPS Round LCD
SKU: R101209- Compact MCU board with 1.28″ capacitive touch LCD and RP2040 chip.
- Dual-core Arm Cortex M0+ processor with up to 133 MHz clock.
- Features 264KB SRAM and 4MB Flash memory for ample storage.
- Equipped with Type-C connector for modern connectivity.
- Includes 6-axis sensor, temperature sensor, and lithium battery support.
- Offers USB 1.1 interface, low-power modes, and CNC metal case.
SKU: R101209 -
IoT Development Boards
Waveshare ESP32-H2 Microcontroller, 96MHz Processor, ESP32-H2-MINI-1-N4 Module
IoT Development BoardsWaveshare ESP32-H2 Microcontroller, 96MHz Processor, ESP32-H2-MINI-1-N4 Module
SKU: R101200- Compact ESP32-H2 development board with RISC-V 32-bit processor.
- Integrated 320KB SRAM, 128KB ROM, 4KB LP memory, and 4MB Flash.
- Supports low-power Bluetooth (BLE) and IEEE 802.15.4 wireless protocols.
- Features USB-C connector for easy connectivity and development.
- Equipped with CH343 UART and CH334 USB HUB chips for versatile development.
- Compatible pinout with ESP32-H2-DevKitM-1 for seamless expansion and compatibility.
SKU: R101200 -
Raspberry Pi Hats
Waveshare PCIe To M.2 Adapter for Raspberry Pi 5, Supports NVMe Protocol M.2 Solid State Drive, High-speed Reading/Writing, HAT + Standard
Raspberry Pi HatsWaveshare PCIe To M.2 Adapter for Raspberry Pi 5, Supports NVMe Protocol M.2 Solid State Drive, High-speed Reading/Writing, HAT + Standard
SKU: R101208- Enables NVMe SSD compatibility for Raspberry Pi 5 with PCIe to M.2 M key adapter board.
- Supports M.2 drives in 2230/2242 sizes and PCIe×1 Gen2/Gen3 modes.
- Exclusive compatibility with Raspberry Pi 5B model.
Features onboard indicator lights for clear operational status. - HAT+ design with EEPROM chip ensures seamless integration.
- Equipped with a power monitoring chip and airflow vent for optimized SSD performance.
SKU: R101208 -
TFT LCD Displays
Waveshare 0.85inch LCD Display Module, IPS Panel, 128×128 Resolution, SPI Interface, 65K colors
TFT LCD DisplaysWaveshare 0.85inch LCD Display Module, IPS Panel, 128×128 Resolution, SPI Interface, 65K colors
SKU: 1858024- Model: Waveshare 0.85inch LCD Display Module, IPS Panel, 128×128 Resolution, SPI Interface, 65K colors.
- 0.85-inch LCD Display Module.
- Embedded GC9107 Driver, Using SPI Bus.
- Comes with examples for Raspberry Pi/Arduino/STM32/ESP32/RP2040/Jetson series.
128×128 resolution, 65K RGB colors, clear and colorful displaying effect.
SKU: 1858024 -
USB Interface Module
Waveshare Industrial USB To 4-Ch Serial Converter, Original FT4232HL Chip, Supports USB To RS232/485/422/TTL
USB Interface ModuleWaveshare Industrial USB To 4-Ch Serial Converter, Original FT4232HL Chip, Supports USB To RS232/485/422/TTL
SKU: 1858036- Model: Waveshare Industrial USB To 4-Ch Serial Converter, Original FT4232HL Chip, Supports USB To RS232/485/422/TTL.
- FT4232HL for fast, stable, and reliable communication with enhanced compatibility.
- Supports USB to a 4-ch multi-functional serial port.
- Stable isolated voltage without extra power supply for the isolated terminal.
- Onboard TTL serial 3.3V/5V voltage translator with switch for easy configuration of TTL levels.
- High-quality USB-B connectors for smooth plug/pull operations.
SKU: 1858036 -
USB Interface Module
Waveshare NAS Multi-functional Mini-Computer Designed for Raspberry Pi Compute Module 4 (NOT included), Network Storage, Dual Solid State Drive slots
USB Interface ModuleWaveshare NAS Multi-functional Mini-Computer Designed for Raspberry Pi Compute Module 4 (NOT included), Network Storage, Dual Solid State Drive slots
SKU: 1658215- Networking: Gigabit Ethernet RJ45 connector × 2 (Original Network port ETH0, and PCIE extended Network port ETH1) , mini PCIE connector, supports 4G module (USB protocol, can not support PCIE protocol) , Nano-SIM card slot supports standard Nano-SIM card for 4G/3G/2G Internet access
- M.2: Dual NVME Solid State Drives slots (compatible with 2230, 2242, 2260, 2280)
- USB: USB 3.2 Gen1 (5Gbps) port× 2
SKU: 1658215 -
-
-
-
-
Battery Charging Boards
Adafruit PowerBoost 1000 Charger – Rechargeable 5V Lipo USB Boost @ 1A – 1000C
Battery Charging BoardsAdafruit PowerBoost 1000 Charger – Rechargeable 5V Lipo USB Boost @ 1A – 1000C
SKU: 1178447- 2A internal switch (~2.5A peak limiting)
- 1000mA+ from a 3.7V LiPoly/LiIon battery.
- Low battery indicator LED lights
- PCB Dimensions: 19mm x 32mm x 5mm / 0.7″ x 1.3″ x 0.2″
- Weight: 2.5g
SKU: 1178447 -
TFT LCD Displays
Waveshare RP2040 Microcontroller Development Board, with 1.28inch Round Touch LCD, Accelerometer And Gyroscope Sensor, With CNC Metal Case
TFT LCD DisplaysWaveshare RP2040 Microcontroller Development Board, with 1.28inch Round Touch LCD, Accelerometer And Gyroscope Sensor, With CNC Metal Case
SKU: R101202- Compact MCU board with 1.28″ capacitive touch LCD and RP2040 chip.
- Dual-core Arm Cortex M0+ processor with up to 133 MHz clock.
- Features 264KB SRAM and 4MB Flash memory for ample storage.
- Equipped with Type-C connector for modern connectivity.
- Includes 6-axis sensor, temperature sensor, and lithium battery support.
- Offers USB 1.1 interface, low-power modes, and CNC metal case.
SKU: R101202 -
Raspberry Pi Hats
Waveshare A7600C1 LTE Cat-1 HAT for Raspberry Pi, Low Speed 4G Module, 2G GSM / GPRS
Raspberry Pi HatsWaveshare A7600C1 LTE Cat-1 HAT for Raspberry Pi, Low Speed 4G Module, 2G GSM / GPRS
SKU: R101196- LTE Cat-1 HAT for Raspberry Pi enabling 4G and 2G communication.
- Supports TCP/IP, HTTP(s), MQTT(s), FTP(s), and SSL protocols.
- Features dial-up, telephone call, SMS capabilities for versatile communication.
- LTE-FDD: B1/B3/B5/B8
- LTE-TDD: B34/B38/B39/B40/B41
- 2G:GSM/GPRS/EDGE: 900/1800 MHz
- SMS:Supported types: MT, MO, CB, Text, PDU
SKU: R101196 -
-
Electronic Modules
Waveshare Raspberry Pi Zero HDMI USB Module + Zero POD Case
SKU: 1552786- HDMI-USB HUB Module: Expands 2x USB2.0 port, converts Mini HDMI port to standard HDMI port
- Zero POD case: Three-part structure design (aluminum alloy case + ABS top and bottom covers)
- Suitable for other Zero series boards.
SKU: 1552786 -
-
Raspberry Pi Displays
Waveshare 2.8″ Touch Screen Expansion For Raspberry Pi Compute Module 4, Fully Laminated Display, Interface Expander Included
Raspberry Pi DisplaysWaveshare 2.8″ Touch Screen Expansion For Raspberry Pi Compute Module 4, Fully Laminated Display, Interface Expander Included
SKU: 1254986- Power input: 5V
- CM4 socket: suitable for all variants of Compute Module 4
- USB: USB 2.0 × 1
- Connector: MIPI CSI 22PIN 0.5mm camera connector
- Fully laminated touch screen. 2.8″ display with 5-point capacitive touch control, better touch experience from the fully laminated screen, together with 6H toughened glass panel, safer to use.
SKU: 1254986 -
Interfacing Cables
Waveshare Industrial USB TO TTL (C) 6pin Serial Cable, Original FT232RNL Chip, Multi Protection Circuits, Multi Systems Support, With Hardware Flow Control
Interfacing CablesWaveshare Industrial USB TO TTL (C) 6pin Serial Cable, Original FT232RNL Chip, Multi Protection Circuits, Multi Systems Support, With Hardware Flow Control
SKU: R112131- Product: Industrial USB TO TTL serial cable
- Chip Scheme: FTDI original FT232RNL
- Host Port: USB
- Data rate: 300bps ~ 3Mbps
- Device port: UART
SKU: R112131 -
OLED Display
Waveshare 0.49inch OLED Display Module, 64×32 Resolution, I2C Communication, Black / White Display Color
OLED DisplayWaveshare 0.49inch OLED Display Module, 64×32 Resolution, I2C Communication, Black / White Display Color
SKU: R107348- SSD1315 driver chip
- Compatible with Raspberry Pi, Pico, Arduino, STM32
- Operates at 5V/3.3V with I2C communication
- Resolution of 64 × 32 pixels
- Compact size: 14.4 × 11.5 mm display
- Supports black and white display colors
SKU: R107348 -
TFT LCD Displays
Waveshare 6.25inch Capacitive Touch Display, 720×1560, Optical Bonding Toughened Glass Panel, HDMI Interface, IPS Panel, 5-Point Touch
TFT LCD DisplaysWaveshare 6.25inch Capacitive Touch Display, 720×1560, Optical Bonding Toughened Glass Panel, HDMI Interface, IPS Panel, 5-Point Touch
SKU: R107352- Input Voltage (V): 5
- Input Current (A): 0.4
- Power Consumption (Watt): 2
- Screen Size (inch): 6.25
- Viewing Angle: 178 Deg
- Display Resolution: 720×1560
SKU: R107352 -
IoT Development Boards
Waveshare ESP32-S3 A7670E LTE 4G Development Board
SKU: R101192- Frequency Band: LTE-FDD: B1, B3, B5, B7, B8, B20
- Data Transmission: ≤5Mbps(UL), ≤10Mbps(DL)
- Power supply method: USB port, 18650 lithium battery holder (18650 battery is NOT included), pin header
- Power input: 5V (USB port / 5V pin header)
3.7~4.2V (18650 lithium battery holder / VBAT pin header) - Logic Level: 3.3V
SKU: R101192