Search results: “e-bike pinion” – Page 2
Showing 49–96 of 8381 results
-
E-Bike Electronics Accessories
24V Electric Bike M5 LCD Display Screen Electric Bicycle Scooter Speedometer With Control Big Vertical Screen
E-Bike Electronics Accessories24V Electric Bike M5 LCD Display Screen Electric Bicycle Scooter Speedometer With Control Big Vertical Screen
SKU: 1813022- Product model: LCD-M5
- Product name: Jiannuo LCD display screen
- Color: Black
- Core wire specification: 5pin
- Voltage: 24V36V48V
- Working temperature: -20 ℃ -60 ℃
- Joint: ordinary joint
SKU: 1813022 -
Gears
Rack and pinion gear pulley plastic shaft worm gear reducer for robot DIY assorted kit- 34 Kindsrobot kits
GearsRack and pinion gear pulley plastic shaft worm gear reducer for robot DIY assorted kit- 34 Kindsrobot kits
SKU: 781385- Product: Rack and pinion gear pulley plastic shaft set
- Easy to change when the gear is missing or damaged, as a spare accessory to use.
- Made of high-quality plastic, wearable, and long service life.
- Small parts, easy to use.
SKU: 781385 -
Robot Kits and Parts
Full Set of 17DOF Biped Robot Educational Robotic Kit+(17pcs) MG995+Servo Horn
SKU: 31119- For hobbyists, robot competitions, kids etc.
- Size:40cm(H) x 23cm(W)
- Containing the 17DOF:
- 1DOF of the head
- 4DOF of the arm
- 2DOF of the shoulder
- 2DOF of the hip
- 6DOF of the legs
- 2DOF of the feet
SKU: 31119 -
-
Bluetooth, WIFI and Trans-receiver ICs
Microchip MCP2542FD-E/SN IC
SKU: 1507567- Supports CAN 2.0 and CAN with Flexible Data Rate (CAN FD) Physical Layer Transceiver Requirements
- Optimized for CAN FD at 2, 5 and 8 Mbps Operation
- Maximum propagation delay: 120 ns
- Loop delay symmetry: -10%/+10% (2 Mbps)
- MCP2542FD/4FD: Wake-up on CAN activity, 3.6 µs filter time
SKU: 1507567 -
Water TDS, pH, Flow, Level and Pressure Sensor
OF06ZAT G3/4 DN20 Water Flow Sensor (Sea) Liquid Like Milk Diesel Gasoline Solene Gasolene Benzine Petrol Oil Flow Meter
Water TDS, pH, Flow, Level and Pressure SensorOF06ZAT G3/4 DN20 Water Flow Sensor (Sea) Liquid Like Milk Diesel Gasoline Solene Gasolene Benzine Petrol Oil Flow Meter
SKU: 1165457- Voltage pulse output: 3-wire.
- Pulse constant: 1.2 mL/PApplied voltage range: 7 – 24VDC (*1)
- Power consumption:Â 0.2VA or less
- Structure:Â Splash-proof structure (IP64 compatible) for indoor use
- Connection:Â G3/4″
- Open collector output:Â Open collector pulse (Capacity: 6 mA DC or less)
SKU: 1165457 -
e-Ink Paper Display
Waveshare 2.13inch Touch E-Paper E-Ink Display for Raspberry Pi Zero, 250×122, ABS Case
e-Ink Paper DisplayWaveshare 2.13inch Touch E-Paper E-Ink Display for Raspberry Pi Zero, 250×122, ABS Case
SKU: 1113348- Operating Voltage: 3.3V
- Gray Scale: 2
- Interface: 3-wire SPI, 4-wire
- SPI Partial Refresh Time: 0.3s
- Full Refresh Time: 2s
- Refresh Power:Â 26.4mW(Typ.)
- Dot Pitch : 0.194 x0.194mm
SKU: 1113348 -
-
e-Ink Paper Display
Waveshare 4.01inch 640×400 Pixels ACeP 7-Color E-Paper E-Ink Display HAT for Raspberry Pi
e-Ink Paper DisplayWaveshare 4.01inch 640×400 Pixels ACeP 7-Color E-Paper E-Ink Display HAT for Raspberry Pi
SKU: 1051927- Operating voltage: 3.3V/5V
- Display color: ACep 7-Color
- Interface: 3-wire SPI, 4-wire SPI
- Crey scale: 2
- Display size: 86.40 × 54.00mm
- Dot pitch: 0.135 × 0.135mm
- Resolution: 640 × 400 pixels
- Advanced Color ePaper (ACeP) technology, supports a 7-Color display
- No backlight keeps displaying last content for a long time even when power down
- Ultra-low power consumption, basically power is only required for refreshing
- Standard Raspberry Pi 40PIN GPIO extension header, supports Raspberry Pi series boards, Jetson Nano
SKU: 1051927 -
Prusa 3D Printer Parts
Original Prusa Stepper Motor E-axis Extruder
SKU: 1611404- Model: Original Prusa Stepper Motor E-axis Extruder.
- Accurate and controlled filament feeding for consistent extrusion.
- High-quality 3D prints.
- Robust Construction.
- Seamless Compatibility.
- Enhanced Performance.
SKU: 1611404 -
-
Raspberry Pi Hats
Waveshare Power over Ethernet HAT (E) for Raspberry Pi
SKU: 1486412- Supports Raspberry Pi 3B+/4B, compatible with the Raspberry Pi official case
- PoE (Power Over Ethernet) capability, IEEE 802.3af-compliant
- Fully isolated switched-mode power supply (SMPS)
- Smaller and more flexible with a more compact component layout
SKU: 1486412 -
-
-
IoT Development Boards
ESP32-WROVER-E ESP32-DEVKITC Core Board for Arduino
SKU: 1308040- Microcontroller: ESP32-WROVER-E
- USB to UART Chip: CH340
- Connector Type: Gold pin (2.54 mm pitch)
- USB Connector: Micro USB
- Buttons: Integrated for additional communication
- LEDs: Integrated for status indication
SKU: 1308040 -
e-Ink Paper Display
7.5-inch E-Ink Paper display HAT for Raspberry Pi
SKU: 223595- Display Resolution: 640×384
- No backlight keeps displaying last content for a long time even when power is down
- Ultra low power consumption, basically power is only required for refreshing
- Compatible with Raspberry Pi 2B/3B/3B+/Zero/Zero W
- SPI interface, for connecting with other controller boards like Raspberry/Arduino/Nucleo, etc.
- Onboard voltage translator, compatible with 3.3V/5V MCUs
SKU: 223595 -
-
-
e-Ink Paper Display
Waveshare 4.2inch Passive NFC-Powered e-Paper Display (No Battery)
SKU: 1051928- Power: NFC-powered
- Resolution: 400×300
- Dot pitch: 0x212x 0x212
- Refresh time: 4s
- No backlight required, e-Paper keep displaying the last content for a long time without power
- No power adapter required
SKU: 1051928 -
e-Ink Paper Display
Waveshare 2.9 inch e-Ink Paper Display Module with SPI Interface
SKU: 223577- Display Resolution: 296×128
- Display Screen Color: Black and White
- No backlight so keeps displaying last content for a long time even when the power is down
- Ultra low power consumption, basically power is only required for refreshing
- SPI interface, for connecting with controller boards like Raspberry Pi/Arduino/Nucleo, etc.
SKU: 223577
