Relay Modules
Showing 49–96 of 200 results
-
Relay Modules
Red Mushroom Cap LAY37-, 11ZS 1NO 1NC DPST, Emergency Stop Push, Button Switch AC 690V 10A, Switch Equipment Lift, Elevator Latching Self Lock
Relay ModulesRed Mushroom Cap LAY37-, 11ZS 1NO 1NC DPST, Emergency Stop Push, Button Switch AC 690V 10A, Switch Equipment Lift, Elevator Latching Self Lock
SKU: 1121394- Rated Insulation Voltage (Ui) : 600V
- Agreed Thermal Current (Ith):10A
- Switch Top Diameter: 39 mm
- Switch Mount Neck Diameter: 23 mm
- Insulation Resistance:≤≥60MΩ
- Contact Resistance: ≤ 25mΩ
- Ambient air temperature: -25°C ~ +40°C
SKU: 1121394 -
Relay Modules
ESP8266 ESP-01 5V WiFi Relay Module
SKU: 835798- Onboard Module: ESP8266 wifi module; in AP mode it can connect with 5 Clients at the same time
- Operating Way: cellphone carried on wifi module; cellphone and wifi module carried on the same router, and use the APP to control relay
- Transmission Distance : 400m (max)
- Relay : 5V,10A/250V AC 10A/30V DC
- Baud Rate: 9600.
- Diode effusion protection;
- Short response time
SKU: 835798 -
-
Relay Modules
24V 4-Channel Relay Module (with Light Coupling)
SKU: 31227- Operating Voltage: 24V DC
- Two separate LEDs for On/Off indication of the Relay
- Triggering input voltage 3.3V – 5V 4)
- Back EMF protection
- Equipped with high-current relay 10A@250VAC / 10A@30VDC
- It can control both AC and DC appliances such as Solenoids, Motors, lights, fans, etc
- High-quality screw terminals (Terminal Block) provided (C, NC, NO) for quick and easy connection
- Freewheeling diode to protect your microcontroller
- Input Signal Pin connected to Burg stick for easy accessibility
- Mounting holes provided
SKU: 31227 -
Relay Modules
5V 2 Channel SSR G3MB-202P Solid State Relay Module 240V 2A Output with Resistive Fuse
SKU: 28500- 2 channel 2 AMP Solid State Relay board
- Control 2 loads of up to 2 amps each at 120V or 240V AC.
- Good for lighting, holiday displays etc.
- Input control signal voltage:
- 0-0.5V the state of low-level relay ON
- 0.5-3.3V Unknown State
- 3.3-5V high-level relay OFF
- Operating Voltage: 5V
- Operating Current: 16mA
- Maximum Load: 2A @ 240VAC
SKU: 28500 -
Relay Modules
ESP8266 WiFi 5V 1 Channel Relay Module
SKU: 43225- Onboard Module: ESP8266 wifi module; in AP mode it can connect with 5 Clients at the same time
- Operating Way: cellphone carried on wifi module; cellphone and wifi module carried on the same router, and use the APP to control relay
- Transmission Distance : 400m (max)
- Relay : 5V,10A/250V AC 10A/30V DC
- Baud Rate: 9600.
- Diode effusion protection;
- Short response time
SKU: 43225 -
Relay Modules
1 Channel Relay Module, 30A with Optocoupler, Isolation 24V Supports, High and Low Triger
Relay Modules1 Channel Relay Module, 30A with Optocoupler, Isolation 24V Supports, High and Low Triger
SKU: 1121224- Channel: 1 channel
- Relay Voltage: 24V
- High impedance controller pin
- Pull-down circuit for the avoidance of malfunction
- One normally closed contact and one normally open contact
- Triode drive, increasing relay coil
SKU: 1121224 -
-
-
-
Relay Modules
8 Channel Isolated 5V 10A Relay Module opto coupler For Arduino PIC AVR DSP ARM
SKU: 9728- Channel: 8 channel
- Relay Operating Voltage: 5V
- One normally closed contact and one normally open contact
- Triode drive, increasing relay coil
- High impedance controller pin
- Pull-down circuit for the avoidance of malfunction
- Power supply indicator and Control indicator lamp
- Power supply and relay instructions, lit, the disconnect is off;
SKU: 9728 -
Relay Modules
24V 6 channel with light coupling relay
SKU: 618389- 2V relay with AC contact capacity of 10A 250V and optocoupler protection.
- The onboard power supply module does not need an external power supply. I / O port driver is active low.
- The module can be used as a microcontroller development board module and also as appliance control, PLC extended output.
- It is using the industry’s top-quality isolation optocouplers, strong anti-jamming ability, stable performance.
- The 1-16 road can be any full-on/off or any road.
- All interfaces can be directly connected through the terminal leads, very convenient.
SKU: 618389 -
-
Relay Modules
5V 6 Channel Low Level Relay Module with Light Coupling
SKU: 618463- 6-way relay output module contact capacity is 10A 250V.
- input IN1, IN2, IN3, IN4, IN5, IN6 signal, a low level is effective.
- Using single-chip design, reliable performance, strong anti-interference, no false triggering, superior performance.
- The trigger terminal has optocoupler isolation, the independent external power supply can trigger completely isolated.
- Each relay has an activity indicator light. With 4 fixed bolt holes, easy installation.
- Support all SCM control. It is applicable to the industrial sector, PLC control and home intelligent control.
SKU: 618463 -
Relay Modules
1 Channel Relay Module, 30A with Optocoupler, Isolation 24V Supports, High and Low Triger, (with Guide Rail
Relay Modules1 Channel Relay Module, 30A with Optocoupler, Isolation 24V Supports, High and Low Triger, (with Guide Rail
SKU: 1121225- Channel: 1 channel
- Comes with GUIDE RAIL
- Relay Voltage: 24V
- High impedance controller pin
- Pull-down circuit for the avoidance of malfunction
- One normally closed contact and one normally open contact
- Triode drive, increasing relay coil
SKU: 1121225 -
Relay Modules
5V 8 Channel Relay Module
SKU: 618461- The 8550 transistor drive, driveability.
- A fixed bolt holes for easy installation.
- It has a relay status indicator led Power LED(Green), 8 relay status indicator LED(Red)
- Relay control interface by single-chip IO.
- Low-level suction close, high-level release.
- Easy to use, simple 3 line structure.
SKU: 618461 -
Relay Modules
ESP8266 10A DC 7-30V Network Relay WIFI Module
SKU: 314748- With ESP8266 Wifi module,4-layers board design.
- Input overvoltage protection, input with TVS, when the voltage exceeds 33V,
- automatic protection will operate.
- Input overcurrent protection.
- 220V 10A relay, one normally open, one normally closed.
- One way optocoupler isolation input, TVS input protection.
SKU: 314748 -
Relay Modules
SONGLE 12V 1-Way, Tracing Sensor Relay, Module
SKU: 1121424- Operating Voltage: 12V DC
- Measuring obstacle distance within 0 – 3 CM.
- Power Supply 3.3V – 5V
- Equipped with high-current relay 10A@250VAC / 10A@30VDC
- It can control both AC and DC appliances such as Solenoids, Motors, lights, fans, etc
- High-quality screw terminals (Terminal Block) provided (C, NC, NO) for quick and easy connection
- Mounting holes provided
SKU: 1121424 -
Relay Modules
SONGLE 5V 1-Way, Tracing Sensor Relay, Module
SKU: 1121425- Operating Voltage: 5V DC
- Measuring obstacle distance within 0 – 2 CM.
- Power Supply 3.3V – 5V
- Equipped with high-current relay 10A@250VAC / 10A@30VDC
- It can control both AC and DC appliances such as Solenoids, Motors, lights, fans, etc
- High-quality screw terminals (Terminal Block) provided (C, NC, NO) for quick and easy connection
- Mounting holes provided
SKU: 1121425 -
Relay Modules
8 Road/Channel Relay Module (with light coupling) 24V
SKU: 31236- Operating Voltage: 24V DC
- Equipped with high-current relay 10A@250VAC / 10A@30VDC
- It can control both AC and DC appliances such as Solenoids, Motors, lights, fans, etc
- High-quality screw terminals (Terminal Block) provided (C, NC, NO) for quick and easy connection
- Freewheeling diode to protect your microcontroller
- Input Signal Pin connected to Burg stick for easy accessibility
- LED Status indicators to indicate the relay ON/OFF status
- Mounting holes provided
SKU: 31236 -
Relay Modules
8 Road/Channel Relay Module (with light coupling) 12V
SKU: 31228- Operating Voltage: 12V DC
- Equipped with high-current relay 10A@250VAC / 10A@30VDC
- It can control both AC and DC appliances such as Solenoids, Motors, lights, fans, etc
- High-quality screw terminals (Terminal Block) provided (C, NC, NO) for quick and easy connection
- Freewheeling diode to protect your microcontroller
- Input Signal Pin connected to Burg stick for easy accessibility
- LED Status indicators to indicate the relay ON/OFF status
- Mounting holes provided
SKU: 31228 -
Relay Modules
12V 6 Channel with Light Coupling Relay Module
SKU: 618378- Operating Voltage: 12V DC
- Equipped with high-current relay 10A@250VAC / 10A@30VDC
- It can control both AC and DC appliances such as Solenoids, Motors, lights, fans, etc
- High-quality screw terminals (Terminal Block) provided (C, NC, NO) for quick and easy connection
- Freewheeling diode to protect your microcontroller
- Input Signal Pin connected to Burg stick for easy accessibility
- LED Status indicators to indicate the relay ON/OFF status
- Mounting holes provided
SKU: 618378 -
Relay Modules
5V Time Control Switch Intermittent Infinite Cycle Countdown Switch Controller Timing Relay Module
Relay Modules5V Time Control Switch Intermittent Infinite Cycle Countdown Switch Controller Timing Relay Module
SKU: 1187473- Output Capacity: DC 5V AC 220V 10A
- Static Current: 20mA
- Working Current: 50mA
- Working Voltage: 12V(fluctuate between 10V~16V won’t be affected)
- Trigger Signal: high-level voltage 4V~20V
SKU: 1187473 -
-
Relay Modules
1 Channel Relay Module, 30A with Optocoupler, Isolation 12V Supports, High and Low Triger, (with Guide Rail)
Relay Modules1 Channel Relay Module, 30A with Optocoupler, Isolation 12V Supports, High and Low Triger, (with Guide Rail)
SKU: 1121223- Channel: 1 channel
- Comes with GUIDE RAIL
- Relay Voltage: 12V
- High impedance controller pin
- Pull-down circuit for the avoidance of malfunction
- One normally closed contact and one normally open contact
- Triode drive, increasing relay coil
SKU: 1121223 -
Relay Modules
12V Time Control Switch Intermittent Infinite Cycle Countdown Switch Controller Timing Relay Module
Relay Modules12V Time Control Switch Intermittent Infinite Cycle Countdown Switch Controller Timing Relay Module
SKU: 1187449- Output Capacity: DC 5V~30V, AC 220V 10A
- Static Current: 20mA
- Working Current: 50mA
- Working Voltage: 12V(fluctuate between 10V~16V won’t be affected)
- Trigger Signal: high-level voltage 4V~20V
SKU: 1187449 -
Relay Modules
1 Channel Relay Module, 30A with Optocoupler, Isolation 5V Supports, High and Low Triger
Relay Modules1 Channel Relay Module, 30A with Optocoupler, Isolation 5V Supports, High and Low Triger
SKU: 1121226- Channel: 1 channel
- Relay Voltage: 5V
- High impedance controller pin
- Pull-down circuit for the avoidance of malfunction
- One normally closed contact and one normally open contact
- Triode drive, increasing relay coil
SKU: 1121226 -
Relay Modules
12V 8 Channel Relay Module
SKU: 618383- Using high-current relay, AC250V 10A DC30V 10A.
- Contact some independent wiring, safe and reliable.
- The standard interface can be extended to a variety of development boards.
- With fixed screw holes for easy installation.
- Suitable for a variety of platforms such as 8051/AVR/AVR/ARM.
SKU: 618383 -
Relay Modules
USB Control 1 Channel Module 5V Relay Module
SKU: 31300- Contact type: NC / COM / NO
- Input current: ≥300mA
- Input voltage: DC 5V
- Support Win7, XP 32-bit systems
- Onboard square USB interface, stable connection.
- Use imported high-performance USB control chip.
- Application code: Green indicates that the relay is closed, the red disconnect
- Military grade PCB board production.
SKU: 31300 -
Relay Modules
8 Channel Relay Module 12V High and Low Level Trigger Relay Module
SKU: 1794669- Operating Voltage: 12V DC
- Maximum Load: AC: 250v/10a; DC: 30v/10a
- Isolation: SMD Optocoupler Isolation with two fully isolated power supply systems
- Drive Modes: High-level and Low-level drive mode
SKU: 1794669 -
Relay Modules
8 Channel Relay Module 24V High and Low Level Trigger Relay Module
SKU: 1794670- Operating Voltage: 24V DC
- Maximum Load: AC: 250v/10a and DC: 30v/10a
- Isolation: SMD Optocoupler Isolation with two fully isolated power supply systems
- Drive Modes: High-level and Low-level drive mode
- Trigger Current: 5mA
SKU: 1794670