IoT Development Boards
Showing 145–192 of 247 results
-
IoT Development Boards
Waveshare ESP32-S3-Nano Development Board, Based on ESP32-S3R8, Compatible with Arduino Nano ESP32
IoT Development BoardsWaveshare ESP32-S3-Nano Development Board, Based on ESP32-S3R8, Compatible with Arduino Nano ESP32
SKU: R107350- Model: ESP32-S3-NANO
- Microcontroller: ESP32-S3R8 (Dual-core 32-bit Xtensa LX7)
- Wireless Communication: 2.4GHz WiFi + Bluetooth LE
- Clock Frequency: ESP32-S3R8: 240MHz
- Operating Voltage: 3.3V
- Analog pins: 8
- Digital Pins: 14
- UART: 2
SKU: R107350 -
-
IoT Development Boards
NanoPi R5C No wif/Blt 4 GB RAM + 32GB eMMC Combo with Metal Case
SKU: 1873852- Model: NanoPi R5C No wif/Blt 4 GB RAM + 32GB eMMC Combo with Metal Case
- Rockchip RK3568B2 Quad-core A55
- 1GB/2GB/4GB LPDDR4X RAM
- Dual 2.5G Ethernet Ports
- HDMI 2.0
- FriendlyWrt 22.03 w/ Kernel 5.10
- UbuntuCore/Desktop W/ GPU&VPU accelerated
SKU: 1873852 -
IoT Development Boards
NanoPi R4S
SKU: 1470332- CPU: big.LITTLE,Dual-Core Cortex-A72(up to 2.0GHz) + Quad-Core Cortex-A53(up to 1.5GHz)
- GPU: Mali-T864 GPU,supports OpenGL ES1.1/2.0/3.0/3.1, OpenCL, DX11, and AFBC
- NPU: 4K VP9 and 4K 10bits H265/H264 60fps decoding, Dual VOP, etc
- DDR3 RAM: 1GB DDR3/4GB LPDDR4
- Storage: No Onboard eMMC
SKU: 1470332 -
-
-
IoT Development Boards
LinkIt Connect 7681 – Wi-Fi HDK for IoT
SKU: 336555- Chipset Core: MT7681 ANDES N9
- Clock Speed: 80MHz
- Flash: 1MB, RAM: 64KB
- Power: on-board 1A 3.3V voltage regulator (can be powered from USB connector)
- Connectors: UART/GPIO/SPI pins are available on connectors (100mil/2.54mm pitch), micro USB connector.
- GPIO Voltage: 3.3V
- PWM Output pin Count: 5
- PWM levels: 0~20
- UART Voltage: 3.3V
- Wi-Fi Spec: 802.11 b/g/n for Station mode; 802.11 b/g for AP mod
SKU: 336555 -
IoT Development Boards
WeAct Studio CH32V203C8T6 RISC-V Low Power Core Demo Board
SKU: R110775- Processor: Qingke V4B
- Memory: 20KB SRAM, 64KB Flash
- Power Supply: 3.3V
- DMA Controllers: 18-channel general DMA controllers
- Analog Features: 10-channel 12-bit ADC, 10-channel TouchKey, 2 amplifiers
- Interfaces: USB2.0 host/device, UARTs (4), CAN, IIC (2), SPI (2)
SKU: R110775 -
IoT Development Boards
ESP32-WROVER-IE ESP32-DEVKITC Core Board for Arduino
SKU: 1535275- Type of development kit: WiFi
- Ciphering: AES, WPA2-PSK, WPA, WPS
- Programmers and development kits features: I/O lines on the pin header
- Communication protocol: Bluetooth, Bluetooth Low Energy, IEEE 802.11b/g/n/e/i
- Flash memory capacity: 8MB:
- SRAM memory capacity: 8388608B
SKU: 1535275 -
IoT Development Boards
NXP Development Board FRDM-KL02Z MKL02Z32VFM4 MCU, Capacitive Touch Slider, Accelerometer, Tri Color LED
IoT Development BoardsNXP Development Board FRDM-KL02Z MKL02Z32VFM4 MCU, Capacitive Touch Slider, Accelerometer, Tri Color LED
SKU: 1382830- Product: NXP Development Board FRDM-KL02Z MKL02Z32VFM4 MCU
- Kinetis L Series KL02 family MCU in a 32QFN package
- Â I/O headers for easy access to MCU I/O pins
- Â Freescale 3-axis accelerometer sensor, MMA8451Q
SKU: 1382830 -
-
IoT Development Boards
WeAct Studio STM32G431CBU6 Core Demo Board
SKU: R110786- Arm® Cortex®-M4 CPU up to 170 MHz with FPU
- Up to 128 Kbytes Flash memory
- 32 Kbytes SRAM
- Memory Protection Unit (MPU)
- Code Readout Protection (PCROP)
- Operating voltage range: 1.71 V to 3.6 V
- Low-power modes: sleep, stop, standby, shutdown
SKU: R110786 -
IoT Development Boards
WeAct Studio CH592F RISC-V Core BLE5.4 Wireless MCU WCH Demo Board
SKU: R110776- Processor Core: QingKe 32-bit RISC-V4C core, Supports RV32IMAC instruction set and self-extending instructions
- Memory: 26KB SRAM, 512KB Flash
- Supports ICP, ISP, and IAP
- Supports OTA wireless upgrade
SKU: R110776 -
IoT Development Boards
Waveshare ESP32-H2 Microcontroller, 96MHz Processor, ESP32-H2-MINI-1-N4 Module
IoT Development BoardsWaveshare ESP32-H2 Microcontroller, 96MHz Processor, ESP32-H2-MINI-1-N4 Module
SKU: R101200- Compact ESP32-H2 development board with RISC-V 32-bit processor.
- Integrated 320KB SRAM, 128KB ROM, 4KB LP memory, and 4MB Flash.
- Supports low-power Bluetooth (BLE) and IEEE 802.15.4 wireless protocols.
- Features USB-C connector for easy connectivity and development.
- Equipped with CH343 UART and CH334 USB HUB chips for versatile development.
- Compatible pinout with ESP32-H2-DevKitM-1 for seamless expansion and compatibility.
SKU: R101200 -
IoT Development Boards
Ameba Z2 AWS IoT ExpressLink Devkit – AWS IoT ExpressLink, Wi-Fi & Bluetooth, multiple IO resources, OTA upgrade
IoT Development BoardsAmeba Z2 AWS IoT ExpressLink Devkit – AWS IoT ExpressLink, Wi-Fi & Bluetooth, multiple IO resources, OTA upgrade
SKU: 1488393- MCU: ARMv8M KM4, 100MHz
- Memory: 4.2MB internal RAM on SoC and 2MB external flash on Dev. Board
- Wi-Fi: 802.11 b/g/n 1×1 Wi-Fi (20/40MHz), Wi-Fi simple config
- Bluetooth: BLE 4.2, SIG Mesh (optional)
SKU: 1488393 -
IoT Development Boards
Neo Core LTS-Soldered
SKU: 1470334- CPU: Allwinner H3, Quad-core Cortex-A7 Up to 1.2GHz
- Power: DC 5V/2A
- DDR3 RAM: 256MB/512MB DDR3 RAM
- Connectivity: 10/100M Ethernet(6Pin, included in 2.54mm pitch pin header)
- Storage: NC/8GB/16GB/32GB eMMC
- GPIO: It includes UART, SPI, I2C, IO etc
- PCB Dimension: 40 x 40mm
- OS Support U-boot,Ubuntu-Core
SKU: 1470334 -
-
-
IoT Development Boards
SeeedStudio LinkIt Smart 7688 Duo
SKU: 672585- 580 MHz MIPS CPU
- Single input single output(1T1R) Wi-Fi 802.11 b/g/n (2.4G)
- Pin-out for GPIO, I2C, SPI, SPIS, UART, PWM, and Ethernet Port
- 32MB Flash and 128MB DDR2 RAM
- USB host
- Micro SD slot
- Support for Arduino (ATmega32U4)
SKU: 672585 -
IoT Development Boards
WeAct Studio S3 WIFI Bluetooth Mini IOT Board ESP32-S3FH4R2 4MB FLASH 2MB PSRAM Compatible with MicroPython
IoT Development BoardsWeAct Studio S3 WIFI Bluetooth Mini IOT Board ESP32-S3FH4R2 4MB FLASH 2MB PSRAM Compatible with MicroPython
SKU: R110784- Chip: ESP32-S3FH4R2
- Wi-Fi: 2.4 GHz
- Bluetooth: Bluetooth LE
- USB Interface: Type-C
- Digital Pins: 27, with interrupt, PWM, I2C, and one-wire support
SKU: R110784 -
-
IoT Development Boards
NanoPi NEO Core-LTS 512M RAM – 8GB eMMC – Pin Headers Not Soldered
SKU: 1873844- Model: NanoPi NEO Core-LTS 512M RAM – 8GB eMMC – Pin Headers Not Soldered
- Quad-Core Affordable Price
- 256MB/512MB Optional
- 0/8GB/16GB/32GB Optional
- Upto 64 GB Bootable from TFcard
- Power input from MicroUSB
- Compatible wtih NEO modules
- Mainline FriendlyCore
- Size 40 x 40mm
SKU: 1873844 -
-
IoT Development Boards
STMICROELECTRONICSÂ B-L462E-CELL1Â IoT Discovery Kit, STM32L462REY6TR, 32bit ARM Cortex-M4 Microcontroller
IoT Development BoardsSTMICROELECTRONICSÂ B-L462E-CELL1Â IoT Discovery Kit, STM32L462REY6TR, 32bit ARM Cortex-M4 Microcontroller
SKU: 1485709- Model: STMICROELECTRONICSÂ B-L462E-CELL1Â IoT Discovery Kit, STM32L462REY6TR
- Product: IoT Discovery Kit
- EEPROM: I2C 16 Kbytes of
- Display: 0.96-inch 128 x 64 OLED screen with SPI interface
- Chip: Arm Cortex-M4 core
SKU: 1485709 -
-
IoT Development Boards
Adafruit Assembled Adafruit Feather HUZZAH with ESP8266 With Headers
SKU: 1383194- ESP8266 v1.1 @ 80MHz with 3.3V logic/power
- 4MB of FLASH (32 MBit)
- Built in WiFi 802.11 b/g/n
- 3.3V regulator with 500mA peak current output
- CP2104 USB-Serial converter onboard with 921600 max baudrate for uploading
SKU: 1383194 -
IoT Development Boards
GAPUINO GAP8 Developer Kit with RISC-V Processor
SKU: 921007- Fabric controller core: 16 kB data and 1 KB instruction cache.
- Cluster: 64 kB shared data and 4 kB shared instruction cache.
- All cores support the same extended RISC-V ISA. Extended instructions include SIMD vector, DSP, bit manipulation, etc.
- Multi-channel 1D/2D DMA.
- Specialized multi-channel micro DMA for autonomous peripheral support.
- Programmable Voltage Regulator.
- Real-Time Clock.
SKU: 921007 -
IoT Development Boards
Adafruit QT Py S3 with 2MB PSRAM WiFi Dev Board with STEMMA QT
SKU: R111303- Processor: ESP32-S3 Dual Core 240MHz Tensilica processor
- Memory: 4MB Flash, 512KB SRAM, 2MB PSRAM
- Connectivity: WiFi, Bluetooth Low Energy (BLE)
- USB: Native USB support
- GPIO Pins: 13 GPIO pins (11 on breakout pads, 2 on QT connector)
SKU: R111303 -
IoT Development Boards
WeAct Studio ESP32H2-N4-A Development Board Support Thread Zigbee Bluetooth5 Bluetooth Mesh Replacement ESP32-H2-DevKitM-1
IoT Development BoardsWeAct Studio ESP32H2-N4-A Development Board Support Thread Zigbee Bluetooth5 Bluetooth Mesh Replacement ESP32-H2-DevKitM-1
SKU: R110788- Processor: 32-bit RISC-V single-core @96MHz
- Connectivity: IEEE 802.15.4 supporting Thread and Zigbee, Bluetooth Low Energy supporting Bluetooth 5 and Bluetooth mesh
- Memory: 320 KB SRAM, 128 KB ROM, 4 KB LP Memory, 2/4 MB Flash
- GPIOs: 19 GPIOs
SKU: R110788 -
IoT Development Boards
WeAct Studio STM32F412RET6 Micropython Demo Board
SKU: R110785- Cortex-M4 CPU at 100 MHz with DSP and FPU
- 512 Kbytes Flash memory, 256 Kbytes SRAM
- Advanced connectivity: SPI, SDIO, USB 2.0 OTG FS, Dual Quad-SPI, CAN 2.0B, USART
- Analog features: 12-bit ADC, temperature sensor
SKU: R110785 -
IoT Development Boards
Waveshare ESP32-S3 A7670E LTE 4G Development Board
SKU: R101192- Frequency Band: LTE-FDD: B1, B3, B5, B7, B8, B20
- Data Transmission: ≤5Mbps(UL), ≤10Mbps(DL)
- Power supply method: USB port, 18650 lithium battery holder (18650 battery is NOT included), pin header
- Power input: 5V (USB port / 5V pin header)
3.7~4.2V (18650 lithium battery holder / VBAT pin header) - Logic Level: 3.3V
SKU: R101192 -
IoT Development Boards
Waveshare ESP32-S3 SIM7670G LTE 4G Development Board
SKU: R101193- Frequency Band LTE-FDD: B1, B2, B3, B4, B5, B7, B8, B12, B13, B18, B19, B20, B25, B26, B28, B66
LTE-TDD: B34, B38, B39, B40, B41 - GNSS: GPS, BeiDou, GLONASS, Galileo
- Power supply method: USB port, 18650 lithium battery holder (18650 battery is NOT included), pin header
- Power input: 5V (USB port / 5V pin header)
3.7~4.2V (18650 lithium battery holder / VBAT pin header) - Logic Level: 3.3V
SKU: R101193 - Frequency Band LTE-FDD: B1, B2, B3, B4, B5, B7, B8, B12, B13, B18, B19, B20, B25, B26, B28, B66
-
IoT Development Boards
Waveshare R7FA4 PLUS B Development Board, Compatible with Arduino UNO R4 WiFi
SKU: R101198- Renesas RA4M1 MCU + Espressif ESP32-S3.
- 12×8 LED matrix, Qwiic connectors, VRTC.
- Works with Arduino UNO R4 Minima.
- 256 kB Flash, 32 kB RAM, 12-bit DAC, CAN bus.
- USB-C or VIN (6V<=VIN<=21V) input options.
SKU: R101198 -