Compatible with Arduino Boards
Showing 49–96 of 209 results
-
Kits compatible with Arduino
Advanced Kit for Arduino
SKU: 31816- All-in-one kit, a great starter kit for learning to code.
- Model Type: UNO Rev R3
- Microcontroller Chip: ATmega328
- Input Voltage(Recommended): 7-12V
- Operating Voltage: 5
- Analog I/O Pins: 6
- Digital I/O Pins: 14 (of which 6 provide PWM output)
SKU: 31816 -
Boards Compatible with Arduino
CH376S USB Module U Disk Read Write Module
SKU: 815821- Supply Voltage: 5V
- Internal curing CH376S chip FAT file system, file operations simple and fast
- Support including USB thumb drives, USB hard drives, USB flash drives, and USB storage devices, USB card reader
- Compatible with CH372, host compatible with CH375
SKU: 815821 -
Shield for Arduino
UNO Proto Shield prototype expansion board with SYB-170 mini breadboard
SKU: 28256- It has a nice standard 0.1″x0.1″ prototyping grid with big pads
- Comes with Stacking headers and plain header, choose whichever you want when soldering together
- An IC pattern for adding DIP ICs up to 20 pins
- Power rails down the middle and sides
- A reset button and an extra general use button
- Two 3mm general use LEDs, red and green, as well as 2 matching resistors
SKU: 28256 -
-
-
Shield for Arduino
Data Logger module Logging Shield data Recorder Shield
SKU: 12191- SD card interface works with FAT16 or FAT32 formatted cards. 3.3v level shifter circuitry prevents damage to your SD card.
- Real-time clock (RTC) keeps the time going even when the Arduino is unplugged. The battery backup lasts for years.
- Included libraries and example code for both SD and RTC mean you can get going quickly Prototyping area for soldering connectors, circuitry or sensors.
- The onboard 3.3v regulator is both a reliable reference voltage and also reliably runs SD cards that require a lot of power to run.
- A dedicated and well-designed data logging shield for Arduino.
SKU: 12191 -
Kits compatible with Arduino
Uno Learning kit for Arduino
SKU: 31821- All-in-one kit, a great starter kit for learning coding.
- Microcontroller ATmega328 (SMD) – Interface CH340G
- Operating Voltage: 5V
- Input Voltage (recommended): 7-12V
- Input Voltage (limits): 5-20V
- Digital I / O Pins 14 (of which 6 provide PWM output)
- Analog Input Pins: 6
SKU: 31821 -
Boards Compatible with Arduino
UNO Based ESP8266 Nodemcu Development Board
SKU: 31279- Based on ESP-8266EX.
- Arduino compatible, using Arduino IDE to program.
- Support OTA wireless upload.
- Onboard 5V 1A Switching Power Supply (highest input voltage 24V).
- The direct use of Arduino IDE development, the same operation with Arduino UNO.
- Operating Voltage: 3.3V
- Digital I/O Pins: 11
- Analog Input Pins: 1
SKU: 31279 -
-
Display for Arduino
1602 LCD Board Keypad Shield Blue Backlight
SKU: 12198- Provides a user-friendly interface that allows users to go through the menu, make selections etc.
- It consists of a 1602 white character blue backlight LCD.
- The keypad consists of 6 keys select, up, right, down, left and reset.
- To save the digital IO pins, the keypad interface only uses one ADC channel.
- The key value is read out through a 5 stage voltage divider.
SKU: 12198 -
-
Shield for Arduino
Sensor Shield V5 Expansion Board For Arduino
SKU: 26598- Retain the merits of the V4.0 version
- Laminated design
- PCB immersion gold processing technology
- IIC interface
- Bluetooth module communication interface
- SD card module communication interface
- APC220 wireless rf modules communication interface
- RB URF v1.1 ultrasonic sensors interface
- 12864 LCD string of line and parallel interface
- 32 servo controller interface
SKU: 26598 -
Shield for Arduino
Ethernet W5100 Shield Network Expansion Board w/ Micro SD Card Slot for Arduino
SKU: 12205- Based on the W5100Based on the Wiznet W5100 allows an Arduino board to connect to the internet.
- Stackable Design, can directly be supported by for Arduino official Ethernet Library.
- Supports up to four simultaneous socket connections
- Can be used to store files for serving over the network.
- Can be accessed using the Mini SD TF library.
- IEEE802.3af compliant
- Low output ripple and noise (100mVpp)
- Overload and short-circuit protection
SKU: 12205 -
Boards Compatible with Arduino
Due AT91SAM3X8E ARM Cortex-M3 Board, 84MHz, 512KB Board compatible with Arduino
Boards Compatible with ArduinoDue AT91SAM3X8E ARM Cortex-M3 Board, 84MHz, 512KB Board compatible with Arduino
SKU: 3345- Microcontroller: AT91SAM3X8E
- Operating Voltage: 3.3V
- Input Voltage (recommended): 7-12V
- Input Voltage (limits): 6-16V
- Digital I/O Pins: 54 (of which 12 provide PWM output)
- Analog Input Pins: 12
- Analog Outputs Pins: 2 (DAC)
- A 32-bit core, that allows operations on 4 bytes wide data within a single CPU clock.
- CPU clock at 84Mhz
- 96KBytes of SRAM
SKU: 3345 -
-
-
-
Boards Compatible with Arduino
LilyPad 328 ATmega328P Main Board 16M Compatible with Arduino
SKU: 28446- Microcontroller: ATmega168 or ATmega328V
- Operating Voltage: 2.7-5.5 V
- Digital I/O Pins: 14
- PWM Channels: 6
- Analog Input Channels: 6
- DC Current per I/O Pin: 40 mA
- Board will run from 2V to 5V.
- The latest version of the LilyPad supports automatic reset for even easier programming.
- The back side of the LilyPad is now completely flat!
SKU: 28446 -
-
Shield for Arduino
ADK USB Host Shield compatible with Arduino
SKU: 3366- Works with standard (dual 5/3.3V) and 3.3V-only (for example, Pro Arduino) boards.
- Complies with USB Specification Revision 2.0 (Full-Speed 12Mbps Peripheral, Full-/Low-Speed 12Mbps/1.5Mbps Host)
- Supports HID devices, such as keyboards, mice, joysticks, etc.
- Compatible with Mass storage devices, such as USB sticks, memory card readers, external hard drives (FAT32 Type File System – Mega Arduino only).
SKU: 3366 -
-
Shield for Arduino
3D Printer CNC Shield V4 Expansion Board For Arduino
SKU: 43461- Worked with Arduino nano.
- 3 axis stepper motor driver
- Compatible with micro-drive laser engraving machine, three-axis CNC engraving machine.
- 2A can be controlled within the two-phase four-wire stepper motor.
- Released the digital IO interface, easy to connect to other modules, such as ENDSTOP.
- Released the I2C interface, you can connect to the LCD I2C or another I2C module.
- Power DC5V interface, 7.5-12V voltage input.
- GRBL compatible.
SKU: 43461 -
-
-
Case for Arduino
Transparent Blue ABS Plastic Case for UNO R3
SKU: 766385- Made of high-quality ABS plastic, provide good protective
- For Arduino UNO R3 Development Board only.
- To protect your little computer against damages, dust and scratches Clear Top and Bottom.
- This case provides easy access to all ports.
- It requires no tools for easy assembly and disassembly.
SKU: 766385 -
Compatible with Arduino Boards
MCP2515 Can Bus Shield Board SPI Interface 9 Pins Standard Sub-D Connector Expansion Module
Compatible with Arduino BoardsMCP2515 Can Bus Shield Board SPI Interface 9 Pins Standard Sub-D Connector Expansion Module
SKU: 790468- SPI Interface up to 10 MHz.
- Implements CAN V1.2 B at up to 1 Mb/s.
- Arduino/ Freaduino Completely compatible.
- Industrial standard 9 pin sub-D connector.
- Standard (11 bit) and extended (29 bit) data and remote frames.
SKU: 790468 -
Shield for Arduino
Prototype Shield V3.0 For Arduino Mega with breadboard
SKU: 28262- The shield can support being fully assembled with Arduino MEGA
- Support soldering components directly on this shield
- Support sticking the mini breadboards on this shield
- Reset button up top
- Mainboard aureate quadrate
- With SOP28 SMT components encapsulation
SKU: 28262 -
-
Shield for Arduino
XBee Shield V03 Module Wireless Control
SKU: 12197- Stackable design, easy to plug into the ARDUINO development board.
- Coupled with the Arduino Bluetooth Bee Bluetooth module, and other Bluetooth devices can communicate Wirelessly.
- 3.3v and 5v dual power output.
- 3.3v and 5v IO compatible.
- USB2.0 protocol.
SKU: 12197 -
Shield for Arduino
MINI USB Host Shield 2.0 ADK
SKU: 618157- Only supports 3.3V / 8M / 328 Promini and 3.3V FTDI.
- Mini USB host allows (Pro mini version only) to achieve USB HOST function, also USB HUB function.
- Provided compiled APK installation package and ADK source files compatible with hardware Mega 1280.
- Support For Google Android ADK function
- Support For Android phone type
SKU: 618157 -
Shield for Arduino
ESP8266 Serial WiFi Expansion Board Module for Arduino
SKU: 815831- 32-bit RISC architecture
- The processor can operate at 80MHz / 160MHz
- 32MB flash memory
- 64kB for instructions
- 96kB for data
- Standard native WiFi 802.11b / g / n
- Operates in AP, Station or AP + Station mode
SKU: 815831 -
Kits compatible with Arduino
Advance kit for Arduino Mega
SKU: 781343- The MEGA2560 complete starter kit with more than 200pcs components.
- Free PDF tutorial, codes, and Libraries in the attachment with more than 35 lessons
- LCD1602 module and GY-61 sensor module with pin header ( no need to solder by yourself)
- The kit comes with each sensor’s Picture with a label to guide beginners.
- High-Quality plastic box with a widget for each sensor to keep them organised for repetitive use.
SKU: 781343 -
-
Shield for Arduino
Servo Driver Module Shield 16 Channel
SKU: 31371- The I2C input, PWM output control 16 roads, steering gear can 16 roads.
- The steering gear power independent V + input maximum 6 V.
- Logic signals and logical power independent output for 3V to 5 V.
- 40-1000 Hz frequency.
- Terminal block for power input.
- Reverse polarity protection on the terminal block input
- Green power-good LED
SKU: 31371 -
Shield for Arduino
XBee Adapter Shield Breakout Board for XBee Module
SKU: 1150793- Simple design, an adapter board combined use with Xbee products.
- Adapter the Xbee 20-pin to dual-row pins with 0.1-inch standard spacing (dual rows with 0.5-inch distance).
- Identifies the pin with the corresponding screen print.
- Free soldering to the board with female socket
SKU: 1150793 -
Boards Compatible with Arduino
Due AT91SAM3X8E ARM Cortex-M3 Board with Micro USB Cable Compatible with Arduino
Boards Compatible with ArduinoDue AT91SAM3X8E ARM Cortex-M3 Board with Micro USB Cable Compatible with Arduino
SKU: 31273- Microcontroller: AT91SAM3X8E
- Operating Voltage: 3.3V
- Input Voltage (recommended): 7-12V
- Input Voltage (limits): 6-16V
- Digital I/O Pins: 54 (of which 12 provide PWM output)
- Analog Input Pins: 12
- Analog Outputs Pins: 2 (DAC)
- A 32-bit core, that allows operations on 4 bytes wide data within a single CPU clock.
- CPU clock at 84Mhz
- 96KBytes of SRAM
SKU: 31273 -
Shield for Arduino
HACK AF L293D Motor Driver/Servo Shield for Arduino Nano
SKU: 143257- Pin compatible with Adafruit Motor Shield
- Pin header to connect sensors and actuators.
- 4 H-Bridges L293D chipset.
- Surg Current Protection for IC L293D.
- Onboard On/Off Switch.
- Drive 4 bi-directional DC motors
- Drive 2 Servo motors (unipolar or bipolar)
- On-board slot to connect HC-05/HC-06 Bluetooth modules for Wireless control via Smartphone
SKU: 143257 -
-