Flight Controller & Accessories
Showing 97–144 of 166 results
-
Flight Controller & Accessories
F4 V3S Plus Flight Control OSD 2-6S Two way 3A BEC 9V Pad Design For Betaflight RC FPV Racing Drone Quadcopter Frame
Flight Controller & AccessoriesF4 V3S Plus Flight Control OSD 2-6S Two way 3A BEC 9V Pad Design For Betaflight RC FPV Racing Drone Quadcopter Frame
SKU: 1203885- Item name: F4 V3 PLUS Flight Controller
- Firmware: Omnibus ~ f4
- Board Dimensions: 36x36mm
- Montagegaten: 30.5×30.5mm
- STM32 F405 MCU
- Dshot protocol
SKU: 1203885 -
Flight Controller & Accessories
Kakute F4 Flight Controller
SKU: 1104558- MCU: STM32F405RGT6Â 32-bit processor
- IMU: ICM20689 (SPI)
- USB VCP Driver (all UARTs usable simultaneously; USB does not take up a UART)
- 3 hardware UARTS (UART1,3,6)
- 128 Mbit Dataflash chip for Blackbox logging
- 5v Power Out: 1.5 A max
- 3.3v Power Out: 200 mA max
SKU: 1104558 -
Flight Controller & Accessories
FMS RC Airplane Gyro Reflex Flight Control System
SKU: 1119191- Suitable For FMS 1.2M Ranger Plane.
- Utilizes a high-speed 32-bit ARM processor onboard.
- 3 axis gyro and 3 axes accelerometer.
- Size: 26.0mm x 34.5mm x 14.5mm
- Weight: 14.5g ( Whole Unit with wire )
SKU: 1119191 -
-
Flight Controller & Accessories
Holybro kakute F7 & amp- tekko 32 Blheli32 4 in 1 ESC stack
SKU: 1010945- Supports 3-6S Lipo input
- 35A continuous current, 50A burst
- MCU: STM32F745 32-bit processor
- IMU: ICM20689 (SPI)
- Barometer: BMP280
- Current Sensor: Approximately 130 amps maximum measurable value
- Supports Betaflight, Butterflight, and Cleanflight.
SKU: 1010945 -
Flight Controller & Accessories
Whoop Lite F3 Mini Brushed Flight Controller
SKU: 974877- CPU: STM32F030
- Six-Axis: MPU6050
- Firmware version: Silverware firmware
- Power Cable: 55mm, with JST-PH 2.0 connector
- ESC: All FETs are rated at 6A maximum. Support 6x15mm/7x20mm/8x20mm/8.5x20mm etc motors.
- Size: 26mm x 26mm, fully compatible with the Inductrix quad frame and mounting pattern
SKU: 974877 -
Flight Controller & Accessories
Mamba F4 pro V2 flight controller
SKU: 1176663- Model: Mamba F4 pro V2
- Input voltage: 2 – 6s LiPo support
- Gyroscope: MPU6000 (reserved external gyroscope interface)
- Firmware: BetaFlihgt 3.2.0 OMNIBUSF4SD
- Support Receiver: PPM, SBUS, IBUS, DSM2/DSMX Receiver (UART1)
- Integrated with OSD, support BF Ground Station adjust OSD
- Adjust the PID by OSD by remote control
SKU: 1176663 -
-
-
Flight Controller & Accessories
AeroFC Flight Controller Board
SKU: 821127- High-Speed STM32 processor
- Triple Redundant IMU
- Light Weight
- Isolated & Dampened IMU
- Compatible with Ardupilot and PX4.
- It can be configured with AeroGCS, Mission Planner, QGround Control software, etc.
Limited Time Launch Offer !!!
SKU: 821127 -
Flight Controller & Accessories
EMAX Mini Magnum 2 F4 35A Flytower 20x20mm 35A 2-6S BLHeli_32 4in1 ESC+F4 Flight Controller OSD+VTX
Flight Controller & AccessoriesEMAX Mini Magnum 2 F4 35A Flytower 20x20mm 35A 2-6S BLHeli_32 4in1 ESC+F4 Flight Controller OSD+VTX
SKU: 812603- Stack Size: 20x20mm
- Flight Controller: F4 Flight Controller (OMNIBUSF4 Firmware)
- ESC: 4in1 BLHeli_32 35A ESC
- Supply Voltage: 2-6S lipo
- VTX: 25mW/200mW
SKU: 812603 -
Flight Controller & Accessories
F3 EVO V2.0 Flight Control
SKU: 674161- Supported Receiver Input Signal: PPM, SBUS, DSM
- Support PPM, SBUS, DSM receiver input signal
- Battery voltage detection and buzzer interface
- Large current NMOS transistors, operating current can reach 10A or higher
- Use STM32F303CCT6 + MPU6500, advanced hardware platform F3 for higher flight stability
SKU: 674161 -
Flight Controller & Accessories
Holybro Original Pixhawk PX4 Flight Controller (without GPS)
SKU: 311064- Main FMU Processor: STM32F76
- 32 bit ARM® Cortex® M7, 216 MHz Processor running NuttX RTOS,
- More computing power and 2X the RAM than previous versions)
- Abundant connectivity options for additional peripherals (UART, I2C, CAN)
- Redundant power supply inputs and automatic failover
- External safety button for easy motor activation
- New sensors with higher temperature stability
- Multicolor LED indicator
- Integrated vibrations isolation
- High-power, multi-tone piezo audio indicator
- microSD card for long-time high-rate logging
SKU: 311064 -
Flight Controller & Accessories
Pixhawk PX4 Autopilot PIX 2.4.8 32 Bit Flight Controller-Normal Quality
Flight Controller & AccessoriesPixhawk PX4 Autopilot PIX 2.4.8 32 Bit Flight Controller-Normal Quality
SKU: 189785- The advanced 32-bit ARM CortexM4 high-performance processors can run NuttX RTOS real-time operating system.
- 14 PWM / servo output.
- Bus interface (UART, I2C, SPI, CAN).
- The integrated backup power and backup controller fails, the primary controller fails over to the backup control is safe.
- Provide automatic and manual modes.
- Provide redundant power input and failover.
- Multicolor LED lights.
- Provide multi-tone buzzer Interface.
- Micro SD recording flight data.
SKU: 189785 -
Flight Controller & Accessories
OMNIBUS F4 Pro V3 Flight Controller
SKU: 127282- STM32 F403 MCU (Spi connected to Gyro)
- Built-in Current/Voltage sensor!
- Firmware hex =Â OMNIBUSF4SD hex from the drop-down.
- MPU6000 (the 6 axis SPI Gyrometer + Accelerometer)
- Smart audio capable VTX PID Programming
- D- Shot Supported (no Modification)
- OSD (configured over Betaflight UI)
- SD CARD Slot for BlackBox
- SBUS/PPM + DSMX Ports
- SmartAudio V2 via J10
- current + voltage + rssi + buzzer as pins
SKU: 127282 -
Flight Controller & Accessories
Flip32 OMNIBUS F4 Flight Controller
SKU: 127316- 128Mb Flash(16M Byte)
- SBUS/PPM input (Pinheaders)
- DSM/DSM2/DSMX input(Plug)
- 6PWM output (Pinheaders)
- Only 36x36mm, mount holes 30.5×30.5mm
- All through hole pin header Design  -no Sh connectors
- STM32 F405 MCU, Runs Raceflight CC3D REVO firmware
- Works Perfect with Raceflight or BetaFlight 3.0
SKU: 127316 -
Flight Controller & Accessories
SP Racing F3 Flight Controller Integrate OSD ACRO Version
SKU: 61253- STM32F303 CPU, 72Mhz inc FPU
- CPU: STM32F303, 72Mhz inc FPU
- Acro: High-Capacity Flash
- Accelerometer/gyro: MPU6050
- Board size: 36 x 36 x 5mm (without shell)
- Board weight: 5.9g
- Weight: 22 gm(with all accessories)
SKU: 61253 -
Flight Controller & Accessories
Omnibus F4 V2 PRO Flight Controller with Built-in OSD
SKU: 61182- STM32 F405 MCU
- Runs Beta flight (3.0.1 and up)
- Race light and D-ronin firmware
- SBUS/PPM input (Pinheaders)
- 6PWM output (1-4Pinheaders and Sh1.0 Plug, 5-6 as Pinheaders)
- Only 36x36mm, mount holes 30.5×30.5mm
- SPI Sensor MPU6000
- 128Mbit Flash
SKU: 61182 -
Flight Controller & Accessories, Interfacing Cables
DF13 4 Pin Flight Controller Cable
SKU: 58221- Item Name: DF13 4 Pin Flight Controller Cable
- 100% Brand new and high quality.
- Weight: about 3g
- Plug Type: DF 13 4 pin
- Length: 200mm(28AWG).
- Color: Red, and Black
- Useful for connection between the PixHawk and the GPS receiver module. or many receiver connections.
SKU: 58221 -
-
Flight Controller & Accessories, Interfacing Cables
DF13 6 Pin Flight Controller Cable
SKU: 58194- Item Name: DF13 6 Pin Flight Controller Cable
- 100% Brand new and high quality.
- Weight: about 3g
- Plug Type: DF 13 6 pin
- Length: 200mm(26AWG).
- Color: Red, and Black
- Useful for connection between the PixHawk and the GPS receiver module. or many receiver connections.
SKU: 58194 -
Drone Accessories, Flight Controller & Accessories
SP RACING F3 FC Replacement Accessories Set
SKU: 58032Accessories compatible with SP RACING F3 Flight Controller Module
High-quality cable and connectors.
1 x 3*8 Burg connector(Straight)
1 x 3*8 Burg connector(Right-angle)
1 x 1*10 Burg Connector(Straight)
2 x 2pt cable
2 x 4pt cable
2 x 8pt cableSKU: 58032 -
Flight Controller & Accessories
Mini OSD for Pixhawk Flight Controller
SKU: 57684- ATmega328P with Arduino bootloader
- MAX7456 monochrome on-screen display
- FTDI cable compatible pinout
- Standard 6 pin ISP header
- 2 independent power sections with an LED indicator on each
- Solder jumpers for combining the power sections
Compatible flight controller:
APM2.5/2.6/2.8
Pixhawk PX4SKU: 57684 -
Flight Controller & Accessories
Naze 32 Full REV6 Flight Controller with Compass & Barometer
SKU: 57248- 2000 degrees/second 3-axis MEMS gyro + accelerometer (MPU6500).
- Input voltage: Max 16V on input rail and up to 35V 6s on the voltage sense line.
- Fully pinout compatible with rev5 accessories (OSDoge etc).
- SBUS Inverter.
- Sonar pads w/resistors added for direct connection to 5V sonar.
- MS5611Â barometer.
- 128mbit flash.
SKU: 57248 -
Flight Controller & Accessories
OMNIBUS F4 V2 PRO Flight Controller with SD Card Slot & BEC
SKU: 57107- Dimensions: 37 x 37 x 10 mm(L x H x W)
- Weight: 12 gm.
- SPI Gyro MPU6000
- MicroSD Blackbox
- F4 Processor (F405)
- 5v3a SBEC
- Built-in Current Sensor
- On-Board OSD (controlled by Beta flight, FC over SPI bus)
- On-Board Video Filter (only can supply 5V to VTX and Camera)
- On-Board Voltage Regulator and Power supply (BEC)
SKU: 57107 -
-
Flight Controller & Accessories
DJI NAZA-M Lite V1.1 with GPS Kit
SKU: 56686- Supported Multi-Rotor: Quad-rotor I4, X4 / Hex-rotor I6, X6, IY6, Y6.
- Supported ESC Output: 400Hz refresh frequency.
- Recommended Transmitter: PCM or 2.4GHz with minimum 4 channels.
- Power Consumption: MAX1. 5W (0.3A@5V) Normal:0.6W (0.12A@5V).
- Weight: MC:25g; VU:20g; GPS:21.3g.
- All-in-One Design.
- Advanced attitude stabilized Algorithm.
- Multiple flight control mode/intelligent switching.
- GPS Module Available/Accurate Position hold.
- Intelligent Orientation Control (IOC).
- Failsafe mode.
SKU: 56686 -
Flight Controller & Accessories
OpenPilot CC3D EVO Flight Controller Straight Pin
SKU: 50818- 3-axis high-performance MEMs gyros and 3-axis high-performance MEMs accelerometer.
- Tiny 36 x 36 mm 4 layer PCB for superior electrical noise reduction and flight performance.
- Software support for Windows, Mac, and Linux.
- Direct high-speed USB support with no drivers required, a true plug and play device.
- Spektrum satellite receiver support.
- Futaba S-BUS hardware support.
- Innovative Flexi-port technology for superior port flexibility.
- 4Mbits onboard EEPROM for configuration storage.
SKU: 50818 -
Flight Controller & Accessories
F3 Brushed Flight Control Board Based On SP RACING F3 EVO Brush for Micro FPV Frame
Flight Controller & AccessoriesF3 Brushed Flight Control Board Based On SP RACING F3 EVO Brush for Micro FPV Frame
SKU: 45650- Supported Receiver Input Signal: PPM, SBUS, DSM
- Support PPM, SBUS, DSM receiver input signal
- Battery voltage detection and buzzer interface
- Run on SP RACING F3 EVO firmware 32 brush flight control
- Large current NMOS transistors, operating current can reach 10A or higher
- Use STM32F303CCT6 + MPU6500, advanced hardware platform F3 for higher flight stability
SKU: 45650 -
Flight Controller & Accessories
SP Racing F3 Flight Controller ACRO Version
SKU: 45626- The STM32F3 CPU, MPU 6050 sensor, 16M high-capacity flash memory, OSD function.
- The SP F3 runs Cleanflight which can be configured to suit your needs using a cross-platform GUI (Windows/OSX/Linux).
- Tiny and lightweight, the Racing F3 has a standard 36x36mm form-factor with 30.5mm mounting holes and weighs just 6 grams.
- Flight Logging, on-board high-capacity black box flight log recorder – optimize your tuning and see the results of your setup without guesswork.
- OneShot ESC, full support for OneShot ESCs for easy PID tuning and a sharper response.
- Broad RC receiver supports SBus, SumH, SumD, Spektrum1024/2048, XBus, PPM, PWM receivers, no external inverters required (built-in).
SKU: 45626