IMU stands for the “Inertial Measurement Unit. IMU Drone consists of accelerometers and gyroscopes to measure acceleration and rotation, which can be used to provide position data. It is an essential component in the drone flight control system. It allows drones to operate and fly with maximum control and stability. Here you can find Accelerometer and Gyroscope Sensor module, SparkFun Breakout board, etc. When it is installed in a device, these tools can capture data about the device’s movement.
IMU, Accelerometer, Magnetometer & Gyroscope
Showing all 31 results
-
-
IMU, Accelerometer, Magnetometer & Gyroscope
DFRobot Gravity I2C LIS2DW12 Triple Axis Accelerometer Sensor (±2g/±4g/±8g/±16g)
IMU, Accelerometer, Magnetometer & GyroscopeDFRobot Gravity I2C LIS2DW12 Triple Axis Accelerometer Sensor (±2g/±4g/±8g/±16g)
SKU: 1073435- Operating Voltage: 3.3V~5V
- Operating Current: 8~10uA
- Interface: Gravity-I2C
- I2C Address: 0x19 (default) / 0x18 (optional)
- User-selectable Scale: ±2g/±4g/±8g/±16g
- Operating Temperature: -40℃~+85℃
SKU: 1073435 -
IMU, Accelerometer, Magnetometer & Gyroscope
M5Stack 6-Axis IMU Unit (MPU6886)
SKU: 1126241- 3-axis gravity accelerometer and 3-axis gyroscope
- On-chip temperature sensor
- Communication protocol I2C：0x68
- Accelerometer noise 100 μg/√Hz
- Gyroscope sensitivity error 1%
- Gyroscope noise ±4 mdps/√H
SKU: 1126241 -
IMU, Accelerometer, Magnetometer & Gyroscope
PIMORONI LSM303D 6DoF Motion Sensor Breakout
SKU: 1033045- LSM303D 6DoF Motion Sensor
- ±2/±4/±8/±12 gauss magnetic scale
- ±2/±4/±6/±8/±16 g linear acceleration
- 16-bit data output
- 3.3V or 5V compatible
- I2C interface, with address select via ADDR cuttable trace (0x1D or 0x1E)
- Reverse polarity protection
SKU: 1033045 -
IMU, Accelerometer, Magnetometer & Gyroscope
SparkFun 6 Degrees of Freedom Breakout – LSM6DSO (Qwiic)
IMU, Accelerometer, Magnetometer & GyroscopeSparkFun 6 Degrees of Freedom Breakout – LSM6DSO (Qwiic)
SKU: 1037778- Operating voltage range:1.71V to 3.6V
- Power consumption @ 1.8V:0.55 mA (High) ,0.26 mA(Low)
- Smart FIFO up to 9 Kilobyte based on features set
- Embedded temperature sensor:16 bit
SKU: 1037778 -
IMU, Accelerometer, Magnetometer & Gyroscope
SparkFun Triple Axis Accelerometer Breakout – MMA8452Q (with Headers)
IMU, Accelerometer, Magnetometer & GyroscopeSparkFun Triple Axis Accelerometer Breakout – MMA8452Q (with Headers)
SKU: 972027- 1.95V to 3.6V supply voltage
- 1.6V to 3.6V interface voltage
- ±2g/±4g/±8g dynamically selectable full-scale
- Current Consumption: 6μA – 165μA
- Output Data Rates (ODR) from 1.56Hz to 800Hz
SKU: 972027 -
IMU, Accelerometer, Magnetometer & Gyroscope
ADXL335 Module 3-axis Analog Output Accelerometer
SKU: 12231- Onboard LDO Voltage regulator
- Can be interfaced with 3V3 or 5V Microcontroller.
- Tap/Double Tap Detection
- Free-Fall Detection
- Analog output
- Build in ultra low noise linear LDO voltage regulator
- Built-in onboard filters, which reduce noise from the motor and other high current electronics
- Power LED
SKU: 12231 -
-
IMU, Accelerometer, Magnetometer & Gyroscope
ADXL345 Tripple Axis Accelerometer Board
SKU: 33070- Supply Voltage: 3.3 V/ 5V.
- Interface Type: I²C, SPI.
- Sensing Range: ±2g, ±4g, ±8g, ±16g.
- Sensitivity:
- X: 28.6 LSB/g.
- Y: 31.2 LSB/g.
- Z: 34.5 LSB/g.
- Ultra Low Power: 40µA in measurement mode, 0.1µA in [email protected] 2.5V.
- Free-Fall Detection.
- Tap/Double Tap Detection.
SKU: 33070 -
-
IMU, Accelerometer, Magnetometer & Gyroscope
BMP180 Digital Barometric Sensor Module compatible with Arduino
IMU, Accelerometer, Magnetometer & GyroscopeBMP180 Digital Barometric Sensor Module compatible with Arduino
SKU: 12218- 1.8V to 3.6V Supply Voltage
- Low power consumption – 0.5uA at 1Hz
- I2C interface
- Max I2C Speed: 3.5Mhz
- Very low noise – up to 0.02hPa (17cm)
- Fully calibrated
- Pressure Range: 300hPa to 1100hPa (+9000m to -500m)
SKU: 12218 -
IMU, Accelerometer, Magnetometer & Gyroscope
BMP280 Barometric Pressure and Altitude Sensor I2C/SPI Module
IMU, Accelerometer, Magnetometer & GyroscopeBMP280 Barometric Pressure and Altitude Sensor I2C/SPI Module
SKU: 415967- Operating Voltage: 1.71V to 3.6V – would typically be operated from 3.3V.
- Operating Temperature: -40 to +85 deg. Celsius (full accuracy between 0 and +65 deg. C).
- Peak current: 1.12mA.
- Operating Pressure: 300 hPa to 1100 hPa.
- Accuracy between 700 to 900hPa and 25 to 40 deg. C: ±0.12hPa and ±1.0m.
SKU: 415967 -
IMU, Accelerometer, Magnetometer & Gyroscope
GY-271 QMC5883L 3-axis Electronic Compass Module Magnetic Field Sensor -(China Chip)
IMU, Accelerometer, Magnetometer & GyroscopeGY-271 QMC5883L 3-axis Electronic Compass Module Magnetic Field Sensor -(China Chip)
SKU: 419760- 3-axis magnetic electronic compass.
- Precise heading information.
- Operating Voltage: 3 -5 V DC.
- Driver Chip: QMC5883L.
- Communication: I2C protocol.
- Measuring range: ± 1.3-8 Gauss.
SKU: 419760 -
IMU, Accelerometer, Magnetometer & Gyroscope
GY-273 QMC5883L 3 Axis Module Magnetic Field Sensor
SKU: 157027- QMC5883L module (three-axis magnetic field module)
- Model: GY-273
- IC: QMC5883L
- I2C interface
- 1-2 degree heading accuracy
- Integrated 12-bit ADC
- 160Hz max data rate
- A range of -8 to +8 Gauss
SKU: 157027 -
-
IMU, Accelerometer, Magnetometer & Gyroscope
GY-511 LSM303DLHC high-precision 3 Axis electronic compass acceleration sensor module
IMU, Accelerometer, Magnetometer & GyroscopeGY-511 LSM303DLHC high-precision 3 Axis electronic compass acceleration sensor module
SKU: 835808- Chip built-in 16-bit data output
- Operating Voltage: 3-5V DC
- Communication: I2C/IIC Protocol
- Accelerometer Range: ± 2 ± 4 ± 8 ± 16 g
- Magnetic Field Range:± 1.3 to ±8.1 gauss
SKU: 835808 -
-
IMU, Accelerometer, Magnetometer & Gyroscope
GY-271 HMC5883L 3-axis Electronic Compass Module Magnetic Field Sensor – Original Chip
IMU, Accelerometer, Magnetometer & GyroscopeGY-271 HMC5883L 3-axis Electronic Compass Module Magnetic Field Sensor – Original Chip
SKU: 42869- 3-axis magnetic electronic compass.
- Precise heading information.
- Operating Voltage: 3 -5 V DC.
- Driver Chip: HMC5883L.
- Communication: I2C protocol.
- Measuring range: ± 1.3-8 Gauss.
SKU: 42869 -
IMU, Accelerometer, Magnetometer & Gyroscope
HW-290/GY-87 10DOF MPU6050+HMC5883L+BMP180 3-axis Gyro + 3-axis Acceleration + 3-axis Magnetic Field + Air Pressure Sensor
IMU, Accelerometer, Magnetometer & GyroscopeHW-290/GY-87 10DOF MPU6050+HMC5883L+BMP180 3-axis Gyro + 3-axis Acceleration + 3-axis Magnetic Field + Air Pressure Sensor
SKU: 12038- 3-axis Gyro+Acceleration+Magnetic Fiel
- Air Pressure Module
- Power supply: 3-5V
- Build in ultra low noise linear LDO voltage regulator
- Built-in onboard filters, which reduce noise from motor and other high current electronics
- You can easily select two I2C address for MPU6050 by soldered jumper
SKU: 12038 -
IMU, Accelerometer, Magnetometer & Gyroscope, Sensors on Sale
M5 Stack Barometric Pressure Unit
SKU: 846414- Air pressure sensor, with a temperature sensor on-chip, can be measure simultaneously
- Based on Bosch bmp280 temperature sensor.
- The accuracy is ± 0.12hpa
- Temperature drift coefficiency 1.5pa/k
SKU: 846414 -
IMU, Accelerometer, Magnetometer & Gyroscope
MMA7361 Angle Acceleration Sensor Module (Replace MMA7260 Acceleration Module)
IMU, Accelerometer, Magnetometer & GyroscopeMMA7361 Angle Acceleration Sensor Module (Replace MMA7260 Acceleration Module)
SKU: 420926- Low Current Consumption: 400 µA.
- Sleep Mode: 3 µA.
- Low Voltage Operation: 2.2 V – 3.6V.
- Fast Turn-On Time (0.5 ms Enable Response Time).
- Analog output for each axis.
- +5V operation @1ma current.
SKU: 420926 -
IMU, Accelerometer, Magnetometer & Gyroscope
MPU9250 9-Axis Attitude Gyro Accelerator Magnetometer Sensor Module
IMU, Accelerometer, Magnetometer & GyroscopeMPU9250 9-Axis Attitude Gyro Accelerator Magnetometer Sensor Module
SKU: 43460- Acceleration, Gyroscope, and Magnetometer
- Power Supply: DC3.3V-5V
- Chip: MPU9250
- Size: 22 mm x 17 mm.
- Gyro range : ± 250 500 1000 2000 ° / s
- Acceleration range: ± 2 ± 4 ± 8 ± 16g
- Magnetic field range: ± 4800uT
- 9 DOF modules
SKU: 43460 -
IMU, Accelerometer, Magnetometer & Gyroscope
SeeedStudio Grove 3 Axis Digital Accelerometer
SKU: 597492- Durable with 10,000g high shock survivability
- Low power and low profile capacitive MEMS sensor
- Configurable samples per second rate
- 3 axis motion/orientation sensing
- Digital output (I2C)
- Off mode current: 0.4μA
- Standby mode current: 2μA
- Active mode current: 47 μA at 1 ODR
- Test range: ±1.5g
- Sensitivity: 21LSB/g
- Suli-compatible library
SKU: 597492 -
IMU, Accelerometer, Magnetometer & Gyroscope
SparkFun 9DoF IMU Breakout – ICM-20948
SKU: 637310- Integrated ICM-20948 IMU and SAMD21 microprocessor.
- LiPo battery charger.
- µSD card socket.
- Preprogrammed example firmware that streams and/or logs:
- Accelerometer, gyroscope and magnetometer data…
- and/or quaternions, and Euler angles
- Arduino-programmable via USB.
SKU: 637310 -
IMU, Accelerometer, Magnetometer & Gyroscope
SparkFun BNO080 VR IMU Breakout Board
SKU: 637312- Rotation Vector
- Dynamic Error: 3.5°
- Static Error: 2.0°
- Gaming Rotation Vector
- Dynamic Error: 2.5°
- Static Error: 1.5°
- Heading Drift: 0.5° / min
- Geomagnetic Rotation Vector
- Dynamic Rotation Error: 4.5°
- Static Rotation Error: 3.0°
SKU: 637312 - Rotation Vector
-
Development Board on Sale, IMU, Accelerometer, Magnetometer & Gyroscope
SparkFun MLX90393 Triple Axis Magnetometer Breakout Board
-10%
Development Board on Sale, IMU, Accelerometer, Magnetometer & GyroscopeSparkFun MLX90393 Triple Axis Magnetometer Breakout Board
SKU: 637311- Operating Voltage: 2.2V-3.6V
- Current Consumption: 100µA (Typ.)
- Operating Temperature: -20°C – 85°C
- Resolution: 0.161µT
- Max Full Scale Resolution: 44,000µT
- I2C Address: 0xC0
SKU: 637311 -
IMU, Accelerometer, Magnetometer & Gyroscope
MPU-6050 3-Axis Accelerometer and Gyroscope Sensor
SKU: 2846- Chip built-in 16bit AD converter, 16-bit data output
- Driver Chip: MPU6050
- Operating Voltage: 3-5V DC
- Communication: I2C/IIC Protocol
- Gyro Range: ± 250, 500, 1000, 2000 °/s
- Accelerometer Range: ± 2 ± 4 ± 8 ± 16 g
SKU: 2846
