DF Robot
Showing 49–96 of 207 results
-
Gas and Dust Sensor
DFRobot Gravity: MEMS Gas Sensor (CO, Alcohol, NO2 & NH3) – I2C – MiCS-4514
SKU: 1141622- Operating Voltage: 3.3～5.5V DC
- Power Dissipation: 0.45W(5V)
- Output Signal: I2C (0~3V)
- Working Temperature: -30～85℃
- Working Humidity: 5～95% RH(No condensation)
- Storage Temperature: -40~85℃
- Lifespan: >2 years (in the air)
- Circuit Board Size: 27mm* 37mm
- Mounting Hole Size: inner diameter 3.1mm/ outer diameter 6mm
SKU: 1141622 -
USB Interface Module
DFRobot Gravity: Active Isolated RS485 to UART Signal Adapter Module
SKU: 1141617- Power Supply Voltage: 3.3~5V
- Communication baud rate up to 1M bps
- Up to 12V-2W power output (output current is about 160mA)
- Isolation voltage 3000 VDC
- Bus electrostatic protection capacity is up to 15kV
- 1/8 unit load, bus load capacity up to 256 nodes
SKU: 1141617 -
LATTEPANDA Boards
LattePanda V1 – A Powerful Windows 10 Mini PC 2GB/32GB
SKU: 1210003- Base Frequency: 1.44GHz (1.92GHz Burst Frequency).
- RAM: 2GB DDR3L.
- Storage Capacity: 32GB.
- GPU: Intel HD Graphics, 12 EUs @200-500Mhz, single-channel memory.
- USB 3.0 x 1, USB 2.0 x 2.
- Gravity Interface Connectors x 6.
- Voltage: 5V@2A.
- Board Dimensions: 88 x 70mm / 3.46 x 2.76″.
- Package Dimensions: 110 x 94 x 30 mm/4.33 x 3.70 x 1.18″.
SKU: 1210003 -
Water TDS, pH, Flow, Level and Pressure Sensor
DFRobot Gravity Industrial Grade Analog pH Sensor / Meter Pro Kit V2
Water TDS, pH, Flow, Level and Pressure SensorDFRobot Gravity Industrial Grade Analog pH Sensor / Meter Pro Kit V2
SKU: 1283758- Supply Voltage: 3.3~5.5V
- Output Voltage: 0~3.0V
- Probe Connector: BNC
- Probe Type: Industrial Grade
- Detection Range: 0~14
- Temperature Range: 0~60°C
- Accuracy : ± 0.1pH (25 ℃)
SKU: 1283758 -
Gas and Dust Sensor
DFRobot Gravity: PM2.5 Air Quality Sensor
SKU: 1141623- Working Voltage: 5.0V
- Maximum Working Current: 100mA
- Standby Current: ≤2mA
- Data Interface Level: L＜0.8V, H>2.7V, maximum voltage level 3.3V
- Particle Measurement Range: 0.3 ~ 1.0μm; 1.0 ~ 2.5μm; 2.5 ~ 10μm
- Particle Counting Efficiency: 50% @ 0.3μm 98% @ ≥0.5μm
- Effective Range of Particle Mass Concentration (PM2.5 standard value): 0~500ug/m³
- Maximum Range of Particle Mass Concentration (PM2.5 standard value): ≥1000ug/m³
- Resolution of Particle Mass Concentration: 1ug/m³
SKU: 1141623 -
-
-
-
-
IMU, Accelerometer, Magnetometer & Gyroscope
DFRobot Fermion: ICG 20660L Accel+Gyro 6-Axis IMU Module (Breakout)
IMU, Accelerometer, Magnetometer & GyroscopeDFRobot Fermion: ICG 20660L Accel+Gyro 6-Axis IMU Module (Breakout)
SKU: 1141611- Operating Voltage: 3.3V
- Current Consumption: 140uA (sleep mode)/ 520uA (Accelerometer mode only)/ 4.27mA (Gyro mode only)/ 4.9mA (accelerometer and gyro mode)
- Initial Sensitivity: accelerometer ±1%; gyro ±1%
- Non-linear Sensitivity: accelerometer ±0.5%, gyro ±0.1%
- Interface: I2C/SPI（7MHz）
- Selectable Scale: ±2g/±4g/±8g/±16g
- Gyroscope Range: ±125/±250/±500dps
SKU: 1141611 -
Water TDS, pH, Flow, Level and Pressure Sensor
DFRobot Gravity Lab Grade Analog Electrical Conductivity Sensor /Meter V2 (K=1)
Water TDS, pH, Flow, Level and Pressure SensorDFRobot Gravity Lab Grade Analog Electrical Conductivity Sensor /Meter V2 (K=1)
SKU: 1356251- Brand: DFRobot
- Product: Gravity Lab Grade Analog Electrical Conductivity Sensor
- Supply Voltage: 3.0~5.0V
- Output Voltage: 0~3.4V
- Support Detection Range: 0~20ms/cm
SKU: 1356251 -
-
Other Sensors
DFRobot Gravity: Offline Language Learning Voice Recognition Sensor for Arduino / Raspberry Pi / Python / ESP32 – I2C & UART
Other SensorsDFRobot Gravity: Offline Language Learning Voice Recognition Sensor for Arduino / Raspberry Pi / Python / ESP32 – I2C & UART
SKU: 1601466- Operating Voltage: 3.3 – 5V
- Maximum Operating Current: ≤370 mA (5V)
- Communication: I2C/UART
- I2C Address: 0x64
- Fixed Command: 121
- Self-learning function
SKU: 1601466 -
Gas and Dust Sensor
DFRobot Fermion MEMS Nitrogen Dioxide NO2 Gas Detection Sensor (Breakout, 0.1-10ppm)
Gas and Dust SensorDFRobot Fermion MEMS Nitrogen Dioxide NO2 Gas Detection Sensor (Breakout, 0.1-10ppm)
SKU: 1680993- Compact size, measuring only 13*13*2.5mm
- Low power consumption, operating current ＜20mA
- High sensitivity and rapid response recovery
- Advanced MEMS technology
- Gas detected: NO2
- Sensitivity: R0(in air)/Rs(in 5ppm NO2) ≥ 0.5
- Lifespan: ≥5 years (in air)
SKU: 1680993 -
Gas and Dust Sensor
DFRobot Fermion MEMS Ammonia NH3 Gas Detection Sensor (Breakout, 1-300ppm)
SKU: 1680985- Compact size, measuring only 13*13*2.5mm
- Low power consumption, operating current ＜20mA
- High sensitivity and rapid response recovery
- Advanced MEMS technology
- Gas detected: Ammonia (NH3)
- Sensitivity: R0(in air)/Rs(in 50ppm NH3) ≥ 3
- Lifespan: ≥5 years (in air)
SKU: 1680985 -
IoT Development Boards
DFRobot FireBeetle 2 Board ESP32-S3 (N16R8) AIoT Microcontroller with Camera (Wi-Fi & Bluetooth on Board)
IoT Development BoardsDFRobot FireBeetle 2 Board ESP32-S3 (N16R8) AIoT Microcontroller with Camera (Wi-Fi & Bluetooth on Board)
SKU: 1601464- Operating Voltage: 3.3V
- Max Charging Current: 1A
- Operating Temperature: -20 to 70℃
- Processor: Xtensa® dual-core 32-bit LX7 microprocessor
- Main Frequency: 240 MHz
- SRAM: 512KB
- ROM: 384KB
- Flash: 16MB
SKU: 1601464 -
Gas and Dust Sensor
DFRobot Gravity Lab Grade Analog Dissolved Oxygen Sensor / Meter Kit For Arduino
SKU: 1356249- Brand: DFRobot
- Product: Gravity Lab Grade Analog Dissolved Oxygen Sensor / Meter Kit For Arduino
- Type: Galvanic Probe
- Detection Range: 0~20mg/L
- Response Time: Up to 98% full response, within 90 seconds (25℃)
- Pressure Range: 0~50PSI
SKU: 1356249 -
Distance Sensor
DFRobot Fermion: TMF8801 ToF Distance Ranging Sensor (20-2500mm)
SKU: 1141616- Operating Voltage: 2.7~3.3V
- Operating Current: ＜1.5mA
- Proximity Detection Range: 20-100mm
- Distance Sensing Range: 100-2500mm
- Operating Temperature: -30~60℃
- Communication Interface: Breakout 2.54mm-8Pin I2C
SKU: 1141616 -
PIR / IR and Optical Sensor
DFRobot mmWave – Human Presence Detection Sensor (9 Meters)
SKU: 1495702- Employs FMCW, CW multi-mode modulation, and separate transmitter and receiver antenna structure.
- Strong anti-interference ability
- Strong sensing reliability, high sensitivity
- Small size, easy to use, and easy to embed integration
- Not to be affected by snow, haze, temperature, humidity, dust, light, noise
SKU: 1495702 -
Gas and Dust Sensor
DFRobot Fermion: ENS160 Air Quality Sensor (Breakout)
SKU: 1254406- Multiple IAQ outputs (TVOC, eCO2, AQI), various environmental data
- Less than 3 minutes warm-up time, get data faster
- Built-in algorithm, more accurate output
- Automatic baseline correction, more stable for long-term use
SKU: 1254406 -
-
Other Sensors
DFRobot Gravity: Lightning Distance Sensor
SKU: 1141621- Input Voltage: 3.3V~5.5V
- Maximum Detection Range: 40 km
- Distance Detection Resolution: 1~4 km
- Intensity Detection Resolution: 21 bits, i.e. 0 ~16777201
- I2C Address: Three options 0x03, 0x02, 0x01
- Interface: Gravity I2C (logic level: 0-VCC)
- Dimension: 30.0mm*22.0mm/1.18*0.87 in
SKU: 1141621 -
IoT Development Boards
DFRobot FireBeetle 2 ESP32 C6 IoT Development Board (Supports Wi-Fi 6, Bluetooth 5, Solar-Powered)
IoT Development BoardsDFRobot FireBeetle 2 ESP32 C6 IoT Development Board (Supports Wi-Fi 6, Bluetooth 5, Solar-Powered)
SKU: 1879629- Supporting Wi-Fi and Thread protocols.
- Supports Wi-Fi 6 protocol for lower latency and lower power consumption.
- Solar charging enables deployment without the need for power lines.
- Battery level detection allows monitoring of device battery information.
SKU: 1879629 -
-
Vibration/Tilt Sensor and Modules
DFRobot Gravity Flexible Piezo Film Vibration Sensor
SKU: 1209998- Operating Temperature: 0ºC to 85ºC.
- Storage Temperature: -40ºC to 85 ºC.
- Higher Temperature Version up to 125 ºC available on a Custom Basis.
- Operating Voltage: 5V.
- Interface Type: Gravity PH2.0 3Pin interface.
SKU: 1209998 -
Boost Converter, Buck Converter
DFRobot Fermion: 8-Bit Level Translator (Breakout)
SKU: 1141608- VCCA Voltage Range: 1.2V-3.6V
- VCCB Voltage Range: 1.65V-5.5V
- Conditions of Use: VCCB>VCCA
- Working Current: 30uA
- Support Port: push-pull, open-drain
- Conversion Speed: push-pull 60Mbps(MAX)\open-drain 2Mbps(MAX)
SKU: 1141608 -
-
-
Gas and Dust Sensor
DFRobot Fermion MEMS Carbon Monoxide CO Gas Detection Sensor (Breakout, 5-5000ppm)
Gas and Dust SensorDFRobot Fermion MEMS Carbon Monoxide CO Gas Detection Sensor (Breakout, 5-5000ppm)
SKU: 1680986- Compact size, measuring only 13*13*2.5mm
- Low power consumption
- High sensitivity and rapid response recovery
- Advanced MEMS technology
- Gas detected: CO
- Sensitivity: R0(in air) / Rs(in 150ppm CO) ≥ 3
- Lifespan: ≥5 years (in air)
SKU: 1680986 -
-
-
Gas and Dust Sensor
DFRobot Fermion MEMS Odor Smell Gas Detection Sensor (Breakout, 0.5-50ppm)
SKU: 1680994- Compact size, measuring only 13*13*2.5mm
- Low power consumption, operating current ＜20mA
- High sensitivity and rapid response recovery
- Advanced MEMS technology
- Gas detected: H2S, EtOH, acetone, etc.
- Sensitivity: R0(in air)/Rs (in 5ppm H2S) ≥ 2
- Lifespan: ≥5 years (in air)
SKU: 1680994 -
-
Water TDS, pH, Flow, Level and Pressure Sensor
DFRobot Gravity Lab Grade Analog Electrical Conductivity Sensor / Meter(K=10)
Water TDS, pH, Flow, Level and Pressure SensorDFRobot Gravity Lab Grade Analog Electrical Conductivity Sensor / Meter(K=10)
SKU: 1356250- Brand: DFRobot
- Product: Gravity Lab Grade Analog Electrical Conductivity Sensor
- Supply Voltage: 3.0~5.0V
- Output Voltage: 0~3.2V
- Signal Connector: PH2.0-3Pin
- Measurement Accuracy: ±5% F.S.
SKU: 1356250 -
-
-
