Generic
Showing 1–48 of 6092 results
-
-
Battery Protection Board
TP4056 1A Li-ion lithium Battery Charging Module With Current Protection – Type C
Battery Protection BoardTP4056 1A Li-ion lithium Battery Charging Module With Current Protection – Type C
SKU: 835842- Input interface: Type C
- Current Protection: Yes
- Charging mode: Linear charging.
- Current: 1A adjustable.
- Charge precision: 1.5%.
- Input voltage: 4.5V-5.5V.
- Full charge voltage: 4.2V.
SKU: 835842 -
-
-
Other Proximity Sensor & Modules
MC-38 Wired Door Window Sensor Magnetic Switch Home Alarm System
SKU: 28657- Actuation Distance: 15 – 25 mm;
- Connecting cable length: 30 cm.
- Connection Type: Normally Close
- Magnetic sensor alarm, control the switch of the circuit via the built-in magnet
- Alarm when someone intrudes into your places
- Can be used in places like apartments, hotels, offices, wardrobe etc.
SKU: 28657 -
USB Interface Module
USB TO UART TTL 5V 3.3V FT232RL Download Cable To Serial Adapter Module For Arduino
USB Interface ModuleUSB TO UART TTL 5V 3.3V FT232RL Download Cable To Serial Adapter Module For Arduino
SKU: 9707- Standard interface layout, compatible with a variety of Arduinos such as the Pro Mini
- Original FTDI FT232 chip, stable performance
- USB power has current protection, using 500MA self-restore fuse
- RXD/TXD transceiver communication indicator
- With power, sending, receiving indicator, working status LED indicators
- Mini USB Port Connection
- Support 3.3V, 5V
SKU: 9707 -
RFID card, Tags & Reader
RFID 13.56MHz Card-5Pcs
SKU: 31266- Contactless transmission of data and supply energy (no battery needed)
- Operating distance: Up to 100mm (depending on antenna geometry)
- Operating frequency: 13.56MHz
- Data transfer: 106 kbit/s
- Data integrity: 16 Bit CRC, parity, bit coding bit counting
- Anticollision
- Typical ticketing transaction: <100 ms ( including backup management)
SKU: 31266 -
Boards Compatible with Arduino
Nano CH340 Chip Board Without USB Cable Compatible with Arduino (Soldered)
Boards Compatible with ArduinoNano CH340 Chip Board Without USB Cable Compatible with Arduino (Soldered)
SKU: 16906- Operating Voltage (logic level): 5V
- With Soldered Connector
- 8 analog inputs ports: A0 ~ A7
- 14 Digital input / output ports: TX, RX, D2 ~ D13
- 1 pair of TTL level serial transceiver ports RX / TX
- Using Atmel Atmega328P-AU MCU
- There is a bootloader installed in it
- Standard 0.1” spacing DIP (breadboard friendly).
- Manual reset switch.
SKU: 16906 -
Other ESP WIFI Modules
ESP-12F ESP8266 Wifi Wireless IoT Board Module
SKU: 18836- Communication interface voltage: 3.3V
- Working current: 240mA(MAX)
- Serial port baud rate: 115200 (default), can be modified to other values by AT command
- Serial communication format: 8N1
- Wireless Network Mode: station / softAP / SoftAP + station
- Wireless criteria: 802.11 b / g / n
- WIFI @ 2.4 GHz, support for WPA / WPA2 security mode
- +19.5dBm output power
SKU: 18836 -
-
Breakout Board
I2C Bi-Directional logic Level Converter- 4 Channel
SKU: 16919- Material: ABS + metal
- Dimensions: 16 x13 x 3 (L x W x H) mm
- Weight: 2gm
- Mutual transform between 5V TTL and 3.3V TTL
- Four channels of logic and high voltage low voltage logic can two-way transform
- Portable and lightness, with 2 rows 6 pin contact pins
SKU: 16919 -
-
IR and RF Transmitters and Receivers
2.4GHz NRF24L01+PA+LNA SMA Wireless Transceiver Antenna
SKU: 18826- Voltage: 3-3.6V (recommended 3.3V) V.
- Maximum output power: +20dBm.
- Power-down mode current: 4.2uA.
- Operating Range: 1Km
- Antenna Gain (peak): 2Dbi.
- 2MB rate (Open area): 520m.
- 1MB rate (Open area): 750m.
- 250Kb rate (Open area): 1100m.
- It uses 2.4GHz global open ISM band, with license free.
- SPI interface facilitates the communication with MCU I/O port.
SKU: 18826 -
Relay Modules
5V Dual Channel Relay Module with Optocoupler
SKU: 31557- Low Level Trigger Relay Module
- Two separate LEDs for On/Off indication of the Relay.
- Triggering input voltage 3.3V – 5V
- Two separate LEDs for On/Off indication of the Relay
- Triggering input voltage 3.3V – 5V 4)
- Back EMF protection
- Back EMF protection 2 LEDs to indicate when relays are ON.
- Works with logic level signals from 3.3V or 5V devices
- Opto isolation circuitry
- Module with diode current protection, short response time
- AC Control Voltage: 250V @max.10A
- DC Control Voltage: 30V @max. 10A
SKU: 31557 -
Buck Converter
LM2596S with SMD LED DC-DC Step-Down Power Supply
SKU: 699581- Input voltage: 3-40V
- Output voltage: 1.5-35V(Adjustable)
- Output current: Rated current is 2A, maximum 3A
- Switching Frequency: 150KHz
- Operating temperature:Industrial grade (-40 to +85 )
- Conversion efficiency: 92%(highest)
SKU: 699581 -
Boards Compatible with Arduino
Uno R3 CH340G ATmega328p Development Board with Micro-USB
SKU: 1038553- Microcontroller ATmega328 (SMD) – Interface CH340G
- Operating Voltage: 5V
- Input Voltage (recommended): 7-12V
- Input Voltage (limits): 5-20V
- Digital I / O Pins 14 (of which 6 provide PWM output)
- Analog Input Pins: 6
SKU: 1038553 -
Boards Compatible with Arduino
Nano R3 W/O USB Cable Compatible with Arduino (Soldered)
SKU: 1588183- Operating Voltage (logic level): 5V
- With Soldered Connector
- 8 analog inputs ports: A0 ~ A7
- 14 Digital input / output ports: TX, RX, D2 ~ D13
- 1 pair of TTL level serial transceiver ports RX / TX
- Using Atmel MEGA328PB-U (Nano)
- There is a bootloader installed in it
- Standard 0.1” spacing DIP (breadboard friendly).
- Manual reset switch.
SKU: 1588183 -
-
-
-
IMU, Accelerometer, Magnetometer & Gyroscope
BMP280 Barometric Pressure and Altitude Sensor I2C/SPI Module
IMU, Accelerometer, Magnetometer & GyroscopeBMP280 Barometric Pressure and Altitude Sensor I2C/SPI Module
SKU: 415967- Operating Voltage: 1.71V to 3.6V – would typically be operated from 3.3V.
- Operating Temperature: -40 to +85 deg. Celsius (full accuracy between 0 and +65 deg. C).
- Peak current: 1.12mA.
- Operating Pressure: 300 hPa to 1100 hPa.
- Accuracy between 700 to 900hPa and 25 to 40 deg. C: ±0.12hPa and ±1.0m.
SKU: 415967 -
Breakout Board
PS2 Joystick Module Breakout Sensor
SKU: 11484- Dimensions: 34 x 34 x 15 (LxWxH) mm.
- Weight: 10gm (without Hat).
- 2.54mm pin interface leads.
- Operating Voltage: 5V.
- Long service life and stable performance.
- Standard interface and electronic building blocks.
- Widely use in Arduino DIY projects.
SKU: 11484 -
-
-
PCB Adapter
Sop8 Tssop8 Ssop8 To Dip8 Adapter-2Pcs.
SKU: 108022- This is a Double-Side PCB Circuit Board, Each PCB board has 8 pins, It is compatible with 4 pins 6 pins and 8 pins chips.
- The side for pin pitch size 1.27mm, It can be used for most of the SO、SOP、SOIC to 2.54mm DIP.
- B side for pin pitch size 0.65mm, It can be used for most of the SSOP、TSSOP、MSOP to 2.54mm DIP.
SKU: 108022 -
Buck Converter
Mini 360 Step-Down Buck Converter Power Module
SKU: 790469- Module: Non-isolated step-down module (BUCK)
- Input voltage: DC 4.75V-23V
- Output voltage: DC 1.0V-17V (Adjustable, Output < Input)
- Rectification: Synchronous rectification
- Built-in 160°C thermal shutdown
- Output ripple: 30mV (no-load)
SKU: 790469 -
-
3D Printer Stepper Motors, Stepper Motors
28BYJ-48 Stepper Motor and ULN2003 Stepper Motor Driver – Good Quality
3D Printer Stepper Motors, Stepper Motors28BYJ-48 Stepper Motor and ULN2003 Stepper Motor Driver – Good Quality
SKU: 17304- Rated voltage: 5V DC
- Reduction Ratio: 64:1
- Step Angle: 5.625° /64
- Frequency: 100Hz
- Self-positioning Torque: >34.3mN.m
- Friction torque: 600-1200 gf.cm
- Pull in torque: 300 gf.cm
SKU: 17304 -
Buck Converter
5A Constant Current / Voltage LED Drives Lithium Battery Charging Module
SKU: 699568- Input Voltage Range: 4-38V
- Output Voltage Range: 25-36V continuously adjustable
- Output current: adjustable, up to 5A
- Output power: up to 75W
- Working temperature :-40 ~ + 85 degrees
- Working frequency: 180KHz
SKU: 699568 -
PCT Wire Connectors
PCT-212 Universal Terminal 0.08-2.5Mm Push-In Electrical Terminals for Cable Connection
PCT Wire ConnectorsPCT-212 Universal Terminal 0.08-2.5Mm Push-In Electrical Terminals for Cable Connection
SKU: 1031157- High-grade Insulative Nylon Material
- Strong Spring Locking Lever
- Nickel Plated Metal Point Inside
- Good Temperature Resistance
- Compact Splicing Connector
- 4-Conductor Terminal Block
SKU: 1031157 -
Logic Level Converter
TXS0108E High Speed Full Duplex 8 Channel Logic Level Converter
SKU: 62491- VCCA Voltage level: 1.2V-3.6V
- VCCB Voltage level: 1.65V-5.5V
- It can provide 3.3-5V, 1.8-3.3V level conversion
- Dimension Approx: 26 x 15 mm
- PCB Color: Blue
- 8-bit bi-directional 3.3V-5V/5V-3.3V logic level converter board
- Serial communication interface compatible with UART/IIC/SPI port easily to connect
SKU: 62491 -
Buck Converter
4A DC-DC Step-down Adjustable Constant Voltage Module
SKU: 405535Applications:
1. High-power LED driver.
2. Lithium battery(or lead accumulator) charge.
3. Vehicle-mounted power supply.
4. Low voltage system power supply.
5. 6V, 12V, 14V, 24V battery charge.
6. On-board laptop power supply.
7. Regulated power supply.
8.Low voltage power supply systemSKU: 405535 -
GPS Modules
NEO-6M GPS Module with EPROM
SKU: 11782- 5Hz position update rate.
- The cold start time of 38 s and Hot start time of 1 s.
- Configurable from 4800 Baud to 115200 Baud rates. (default 9600).
- SuperSense ® Indoor GPS: -162 dBm tracking sensitivity.
- Support SBAS (WAAS, EGNOS, MSAS, GAGAN).
- Separated 18 x 18mm GPS antenna.
SKU: 11782 -
