Generic
Showing 385–432 of 6083 results
-
-
-
Power Adapter and Cable, Power Cables and Accessories
AC 250V 15A IEC320 C14 Male Power Cord Inlet Socket with Fuse Holder
Power Adapter and Cable, Power Cables and AccessoriesAC 250V 15A IEC320 C14 Male Power Cord Inlet Socket with Fuse Holder
SKU: 975702- Plug Type : 3 Pin IEC320 C14
- Terminal Pin Size: 4.8×0.8mm
- Hole Center Distance: 36 mm
- Voltage/ Current : 15A, 250V AC
- Hole in Top Face Diameter: 3.5mm
- Fuse Ampere(Presupposed): 15A
SKU: 975702 -
-
-
-
Motor Mounting Brackets
Servo Mount Brackets For MG995 MG996 Servo Motor
SKU: 975837- Supported Motors: 10kg-cm servos (such as MG995, MG996)
- No of Axis: 2 axis
- Weight : 51.2gms
- No of Metallic Pieces: 2
- This product is made of high-quality materials and is durable.
- Various sensors can be installed to complete a variety of novel interactive works through the servo controller.
- It is convenient to install the camera, which can realize image monitoring and image recognition and tracking.
SKU: 975837 -
USB Interface Module
USB To Serial Adapter Module USB TO TTL RS232 Arduino Cable With CTS RTS
SKU: 43433- The TTL-232R cables are a family of USB to TTL serial UART converter cables incorporating FTD’s.
- UART interface IC device which handles all the USB signaling and protocols. The cables provide a fast, simple way to connect.
- Devices with a TTL level serial interface to USB.
- Each TTL-232R cable contains a small internal electronic circuit board, utilizing the FT232R, which is encapsulated into the USB.
- the connector end of the cable. The other end of the cable comes with a selection of different connectors supporting various applications.
- The USB side of the cable is USB powered and USB 2.0 full speed compatible.
- Each cable is 1.0m long and supports a data transfer rate up to 3 M baud.
SKU: 43433 -
Relay Modules
5V 1 Channel Without Light Coupling Relay
SKU: 618455- The 8550 transistor drive, driveability.
- A fixed bolt holes for easy installation.
- It has a relay status indicator led Power LED(Green), 8 relay status indicator LED(Red)
- Relay control interface by single-chip IO.
- Low-level suction close, high-level release.
- Easy to use, simple 3 line structure.
SKU: 618455 -
-
-
-
-
-
-
Generic Mini Pumps
15L High Flow 555 Vacuum Pump, Air Pump, Oxygen Pump, Fish Tank Folding
SKU: 76749- Operating voltage: 12 VDC
- Rated current: 800mA
- Inflation time: <6 seconds (from 0 to 300 mmHg in a 1000CC closed container)
- Minimum pressure: >400 mmHg (53.33KPa)
- Maximum pressure: 750.062mmHg (100KPa)
- Hermeticity: <5mmHg (from 1000mmHg in 1000CC container min), airtight only for inflation
- Flow rate: >15 L/Min
- Noise: <55dB (test at 30cm distance)
- Lifetime: 100,000 cycles tested
SKU: 76749 -
3D Printer Extruder Parts and Fans
PC4-M6 Pneumatic Push in Bowden Extruder for 4mm J-Head Fitting
SKU: 921906- Inside Diameter:Â 4mm
- Thread Size:Â M6
- PTFE Tubing Compatibility: 3mm ID PTFE Tubing (for 1.75mm Filament)
- Materials:Â Nickel Plated Brass
- Release Method:Â Elliptical John Guest Fitting
SKU: 921906 -
-
-
Best Prices, Buck Converter
XL7015 DC-DC Step Down Adjustable Power Supply Buck Module
SKU: 890247- Input voltage range: 5V-80V DC
- Output voltage range: 1.5V-20V DC adjustable.
- Output current: 0-0.8A.
- High efficiency up to 90%
- Built-in thermal shutdown function
- Built-in current limit function
- Built output short protection function
SKU: 890247 -
PCT Wire Connectors
LT-933(SPL-93) Stationary Type Quick Connection Terminal
SKU: 1121341- Rated Voltage (V):450
- Rated Current(A):32
- Body Material: Modified Nylon (PA66)
- Contact Material: Stainless Steel
- No. of Contact Points:9:3
- Rated Power (W):4 KW
- Allowed Wire Size (AWG):28 ~ 12
- Color:Grey+Orange+Blue+Yellow
SKU: 1121341 -
Battery Chargers, Battery Charging Boards
XH-M601 12V Battery, Charging Control Board, Intelligent Charger Power, Control Panel Automatic, Charging Power
Battery Chargers, Battery Charging BoardsXH-M601 12V Battery, Charging Control Board, Intelligent Charger Power, Control Panel Automatic, Charging Power
SKU: 1121439- Power Supply Voltage:13.8-14.8V
- Relay Operating Voltage:12.4V
- Relay Disconnect Voltage:14.8V
- Voltage Tolerance:+/-0.1V
- Voltage Detection Way: DC voltmeter
SKU: 1121439 -
-
-
-