Seeed Studio
Showing 97–144 of 272 results
-
USB Interface Module
Seeed Studio XIAO RP2040 v1.0
SKU: 1201742- Item: XIAO RP2040
- Processor: Dual-core ARM® Cortex® M0+ @133MHz
- Flash: 2MB
- Onboard Button: Reset Button/ Boot Button
- RGB LED: Full-Color RGB LED
- Analog Pin: 4
- PWM Pin: 11
- DAC Output: None
- Programming language: Arduino,MicroPython,CircuitPython
SKU: 1201742 -
Seven Segment Display
SeeedStudio Grove 0.54″ Red Dual Alphanumeric Display
SKU: 1135204- Supply voltage: 3.3V / 5V
- Operating ambient temperature: -30°C to 85°C
- LED DisplayJM-S05422AH-001
- LED Controller Driver: HT16K33
- LED Color: Red
- Ultra-high brightness: 30mcd
- LED height: 0.54inch
- LED segment: 14
- Size: 40 * 40mm
- Output interface: I2C
- I2C Address(Selectable) 0x70(Default)
SKU: 1135204 -
Seven Segment Display
SeeedStudio Grove 0.54‘’ Red Quad Alphanumeric Display
SKU: 1135205- Supply voltage 3.3V / 5V
- Operating ambient temperature -30°C to 85°C
- LED Display JM-S05442ASR-001
- LED Controller Driver HT16K33
- LED Color Red
- Ultra-high brightness 30mcd
- LED height 0.54inch
- LED segment 14
- Size 40 * 60mm
- Output interface I2C
- I2C Address(Selectable) 0x71(Default)
SKU: 1135205 -
-
-
-
OLED Display
SeeedStudio Grove OLED Display 0.96”
SKU: 1135214- Power Voltage (VCC): 3.3~5.5 V
- Driver IC: SSD1308Z
- Display Color: White
- Dot Matrix: 128×64
- Panel Size: 26.7(W)×19.26(H)mm
- Active Area: 21.74(W)×11.175 (H)mm
- Dot Pitch: 0.17(W)×0.175 (H)mm
- Dot Size: 0.15(W)×0.15 (H)mm
- Wide range of operating temperature:20~70℃
SKU: 1135214 -
Audio Amplifier Module
SeeedStudio Grove Recorder v3.0
SKU: 1135217- Working Voltage: 3.â…—V
- Working Current (@5V, 25℃)
- Standby: 25-30mA
- Recording: 29-35mA
- Playing: 110-150mA
- Working Current (@3.3V, 25℃)
- Standby: 23-25mA
- Recording: 25-30mA
- Playing: 70-150mA
- Working Temperature: 0~85℃
- Size: 40x20mm
- Weight: 31.5g
SKU: 1135217 -
-
PIR / IR and Optical Sensor
SeeedStudio Grove VOC and eCO2 Gas Sensor (SGP30)
SKU: 1135221- Working Voltage:3.3V/5V
- Output range :
- TVOC 0 ppb to 60000ppb ,
- COâ‚‚eq 400 ppm to 60000 ppm
- Sampling rate:
- TVOC 1HZ
- COâ‚‚eq 1HZ
- Resoulation:
- TVOC :0 – 2008 ppb / 1 ppb
2008 – 11110 ppb / 6 ppb
11110 – 60000 ppb / 32 ppb - COâ‚‚eq :400 – 1479 ppm / 1 ppm
1479 -5144 ppm / 3 ppm
5144 – 17597 ppm / 9 ppm
17597 – 60000 ppm / 31 ppm
- TVOC :0 – 2008 ppb / 1 ppb
- Default I2C address 0X58
SKU: 1135221 -
-
-
-
-
Bluetooth and NRF Modules
SeeedStudio Grove BLE (dual model)
SKU: 1147642- BT Version Bluetooth Specification V4.0 BLE
- Supply Power 3.3v – 5v
- Working frequency 2.4GHz ISM band
- Modulation method GFSK(Gaussian Frequency Shift Keying)
- Speed Asynchronous: 6K Bytes, Synchronous: 6K Bytes
- Size 40cm x 20cm
SKU: 1147642 -
Other Sensors
SeeedStudio Grove Doppler Radar (BGT24LTR11)
SKU: 1147647- Model BGT24LTR11
- Transmission Frequency Min: 24GHz
- Compact size for easy deployment
- Communication Interface UART (115200)
- 24GHz Transceiver MMIC for high-precision measurements
- Standard Detection Field 65° / horizontal (-6dB); 22° / vertical (-6dB)
- Weight 5g
SKU: 1147647 -
-
Bluetooth, WIFI and Trans-receiver ICs
Seeedstudio Wio Tracker 1110 Dev Board- the Tracker Prototype for Indoor and Outdoor Positioning
Bluetooth, WIFI and Trans-receiver ICsSeeedstudio Wio Tracker 1110 Dev Board- the Tracker Prototype for Indoor and Outdoor Positioning
SKU: 1881896- Model: Seeedstudio Wio Tracker 1110 Dev Board- the Tracker Prototype for Indoor and Outdoor Positioning
- Powered by the Nordic nRF52840 and Semtech LR1110.
- Multi-protocols.
- Onboard temperature sensor.
- Humidity sensor.
- 3-axis accelerometer.
SKU: 1881896 -
Boards Compatible with Arduino
Seeeduino V4.3 (ATMega328P) Development Board
SKU: 1691810- ATmega328P microcontroller
- Arduino UNO bootloader
- 14 Digital I/O Pins (6 PWM outputs)
- 6 Analog Inputs
- ISP Header
- Arduino UNO-R3 Shield Compatible
- Micro USB programming and power supply
- 3 on-board Grove connectors
- 3.3/5V system operation power switch
SKU: 1691810 -
Temperature & Humidity Sensor
SenseCAP Indicator + D1S, 4-Inch Touch Screen IoT development platform powered by ESP32S3 & RP2040
Temperature & Humidity SensorSenseCAP Indicator + D1S, 4-Inch Touch Screen IoT development platform powered by ESP32S3 & RP2040
SKU: 1670438- Screen:Â 3.95 Inch, Capacitive RGB Touch Screen
- Screen Resolution: 480 x 480 pixels
- Power Supply:Â 5V DC, 1A
- Processor: ESP32-S3: Xtensa® dual-core 32-bit LX7, up to 240MHz / RP2040: Dual ARM Cortex-M0+ up to 133MHz
- Flash:Â ESP32S3: 8MB/ RP2040: 2MB
- External Storage:Â Support up to 32GB Micro SD Card (not included)
SKU: 1670438 -
Temperature & Humidity Sensor
SenseCAP Indicator D1, 4-Inch Touch Screen IoT development platform powered by ESP32S3 & RP2040
Temperature & Humidity SensorSenseCAP Indicator D1, 4-Inch Touch Screen IoT development platform powered by ESP32S3 & RP2040
SKU: 1670439- Screen:Â 3.95 Inch, Capacitive RGB Touch Screen
- Screen Resolution: 480 x 480 pixels
- Power Supply:Â 5V DC, 1A
- Processor: ESP32-S3: Xtensa® dual-core 32-bit LX7, up to 240MHz / RP2040: Dual ARM Cortex-M0+ up to 133MHz
- Flash:Â ESP32S3: 8MB/ RP2040: 2MB
- External Storage:Â Support up to 32GB Micro SD Card (not included)
SKU: 1670439 -
Temperature & Humidity Sensor
SenseCAP Indicator D1Pro, 4-Inch Touch Screen IoT development platform powered by ESP32S3 & RP2040
Temperature & Humidity SensorSenseCAP Indicator D1Pro, 4-Inch Touch Screen IoT development platform powered by ESP32S3 & RP2040
SKU: 1670441- Screen:Â 3.95 Inch, Capacitive RGB Touch Screen
- Screen Resolution:Â 480 x 480 pixels
- Power Supply:Â 5V DC, 1A
- Processor: ESP32-S3: Xtensa® dual-core 32-bit LX7, up to 240MHz / RP2040: Dual ARM Cortex-M0+ up to 133MHz
SKU: 1670441 -
LORA Module
SenseCAP M1 LoRaWAN Indoor Gateway(4G RAM+SX1302) – EU868
SKU: 1181678- Input Voltage DC 5V – 3A
- Processor Raspberry Pi 4 (Broadcom BCM2711, Quad-core Cortex-A72 (ARM v8) 64-bit SoC @ 1.5GHz)
- RAM: 4GB
- Storage: 64GB MicroSD Card
- Wi-Fi 2.4 GHz and 5.0 GHz IEEE 802.11ac wireless
- Bluetooth 5.0, BLE
- LoRaWAN Supports Class A, C
SKU: 1181678 -
Seeed Studio SBC
SenseCAP M4 Square – FluxNode 4 core, 512 GB SSD, 8GB RAM
SKU: 1519181- Processor: Intel Celeron J4125 (Frequency: 2.0 – 2.7GHz)
- Coprocessor: Raspberry pi@ RP2040 32bit Dual-core Arm Cortex M0+
- Graphics: Intel UHD Graphics 600 (Frequency: 250 – 750MHz)
- Memory: LPDDR4 8GB
- Storage: Internal 512GB SSD
SKU: 1519181 -
LORA Module
WM1302 LoRaWAN Gateway Module (SPI) – US915, based on LoRa Concentrator Semtech SX1302
SKU: 1373772- Product: WM1302 LoRaWAN Gateway Module (SPI) – US915, based on LoRa Concentrator Semtech SX1302
- Semtech SX1302 LoRa Transceiver with 2x SX1250 Tx/Rx front-ends
- Tx power – Up to 26dBm @ 3.3V
- Rx sensitivity – Down to -139dBm @ SF12, BW 125 kHz; -125dBm @ 125K/SF7
- LoRaWAN 1.0.2 compatible.
SKU: 1373772 -