Seeed Studio
Showing 193–240 of 273 results
-
ARM Microcontroller
ODYSSEY- STM32MP135D with eMMC, Cortex-A7 STM32, Yocto/Buildroot OS, Ethernet ports with WoL, USB Type-A, CSI, LCD, 4Gb DRAM, TF card holder, PoE
ARM MicrocontrollerODYSSEY- STM32MP135D with eMMC, Cortex-A7 STM32, Yocto/Buildroot OS, Ethernet ports with WoL, USB Type-A, CSI, LCD, 4Gb DRAM, TF card holder, PoE
SKU: 1682403- Processor: 32-bit Arm Cortex-A7 STM32 MPU
- Operating System: Yocto, Buildroot
- Connectivity: 2x 10/100M Ethernet ports, ETH0 supports WoL function,
-
- 1x USB Type-A,
- 1x CSI 30p FPC Connector,
- 1x LCD 40p FPC Connector,
- 40-pin RPI-compatible GPIO
- Storage: Kingston: 4Gb DRAM, additional TF card holder for up to 32GB, 4GB eMMC
-
- Power Supply: PoE through Ethernet, power supply through Type-C
SKU: 1682403 -
-
LORA Module
WM1302 LoRaWAN Gateway Module (SPI) – US915, based on LoRa Concentrator Semtech SX1302
SKU: 1373772- Product: WM1302 LoRaWAN Gateway Module (SPI) – US915, based on LoRa Concentrator Semtech SX1302
- Semtech SX1302 LoRa Transceiver with 2x SX1250 Tx/Rx front-ends
- Tx power – Up to 26dBm @ 3.3V
- Rx sensitivity – Down to -139dBm @ SF12, BW 125 kHz; -125dBm @ 125K/SF7
- LoRaWAN 1.0.2 compatible.
SKU: 1373772 -
Other Sensors
SeeedStudio Grove Doppler Radar (BGT24LTR11)
SKU: 1147647- Model BGT24LTR11
- Transmission Frequency Min: 24GHz
- Compact size for easy deployment
- Communication Interface UART (115200)
- 24GHz Transceiver MMIC for high-precision measurements
- Standard Detection Field 65° / horizontal (-6dB); 22° / vertical (-6dB)
- Weight 5g
SKU: 1147647 -
-
Seeed Studio SBC
ODYSSEY – X86J4125800 Most expandable Win10 Mini PC (Linux and Arduino Core) with 8GB RAM
Seeed Studio SBCODYSSEY – X86J4125800 Most expandable Win10 Mini PC (Linux and Arduino Core) with 8GB RAM
SKU: 744478- It is Unactivated version without eMMC
- Intel Celeron J4125, Quad-Core 1.5-2.5GHZ
- Dual-Band Frequency 2.5GHz/5GHz WiFi/ Bluetooth 5.0
- Dual Gigabit Ethernet
- Integrated Arduino Coprocessor ATSAMD21 ARM Cortex-M0+
- Support Windows 10 & Linux OS
- Unactivated version without eMMC
- This Board is available on pre-order only with a lead time of 15-20 Days.
SKU: 744478 -
Bluetooth, WIFI and Trans-receiver ICs
Seeedstudio Wio Tracker 1110 Dev Board- the Tracker Prototype for Indoor and Outdoor Positioning
Bluetooth, WIFI and Trans-receiver ICsSeeedstudio Wio Tracker 1110 Dev Board- the Tracker Prototype for Indoor and Outdoor Positioning
SKU: 1881896- Model: Seeedstudio Wio Tracker 1110 Dev Board- the Tracker Prototype for Indoor and Outdoor Positioning
- Powered by the Nordic nRF52840 and Semtech LR1110.
- Multi-protocols.
- Onboard temperature sensor.
- Humidity sensor.
- 3-axis accelerometer.
SKU: 1881896 -
Other Ultrasonic Sensors
Seeed Studio Grove Ultrasonic Sensor (US5) ToF, distance detection, echo energy intensity value, materials distinguished, 1.6cm in diameter, 1.2cm in height
Other Ultrasonic SensorsSeeed Studio Grove Ultrasonic Sensor (US5) ToF, distance detection, echo energy intensity value, materials distinguished, 1.6cm in diameter, 1.2cm in height
SKU: 1770547- Product: Grove Ultrasonic Sensor
- Ranging Frequency: 100 Hz
- Supply Voltage: 3.3V
- Working current: 40 mA
- Operating Temperature: -10 to 40℃
SKU: 1770547 -
Boards Compatible with Arduino
Seeeduino V4.3 (ATMega328P) Development Board
SKU: 1691810- ATmega328P microcontroller
- Arduino UNO bootloader
- 14 Digital I/O Pins (6 PWM outputs)
- 6 Analog Inputs
- ISP Header
- Arduino UNO-R3 Shield Compatible
- Micro USB programming and power supply
- 3 on-board Grove connectors
- 3.3/5V system operation power switch
SKU: 1691810 -
Temperature & Humidity Sensor
SenseCAP Indicator + D1S, 4-Inch Touch Screen IoT development platform powered by ESP32S3 & RP2040
Temperature & Humidity SensorSenseCAP Indicator + D1S, 4-Inch Touch Screen IoT development platform powered by ESP32S3 & RP2040
SKU: 1670438- Screen:Â 3.95 Inch, Capacitive RGB Touch Screen
- Screen Resolution: 480 x 480 pixels
- Power Supply:Â 5V DC, 1A
- Processor: ESP32-S3: Xtensa® dual-core 32-bit LX7, up to 240MHz / RP2040: Dual ARM Cortex-M0+ up to 133MHz
- Flash:Â ESP32S3: 8MB/ RP2040: 2MB
- External Storage:Â Support up to 32GB Micro SD Card (not included)
SKU: 1670438 -
-
-
ARM Microcontroller
ODYSSEY – STM32MP135D, Cortex-A7 STM32, Yocto/Buildroot OS, Ethernet ports with WoL, USB Type-A, CSI, LCD, 4Gb DRAM, TF card holder, PoE
ARM MicrocontrollerODYSSEY – STM32MP135D, Cortex-A7 STM32, Yocto/Buildroot OS, Ethernet ports with WoL, USB Type-A, CSI, LCD, 4Gb DRAM, TF card holder, PoE
SKU: 1682405- Processor: 32-bit Arm Cortex-A7 STM32 MPU
- Operating System: Yocto, Buildroot
- Connectivity: 2x 10/100M Ethernet ports, ETH0 supports WoL function,
- 1x USB Type-A,
- 1x CSI 30p FPC Connector,
- 1x LCD 40p FPC Connector,
- 40-pin RPI-compatible GPIOStorage: Kingston: 4Gb DRAM, additional TF card holder for up to 32GB,
SKU: 1682405 -
Temperature & Humidity Sensor
SenseCAP Indicator D1Pro, 4-Inch Touch Screen IoT development platform powered by ESP32S3 & RP2040
Temperature & Humidity SensorSenseCAP Indicator D1Pro, 4-Inch Touch Screen IoT development platform powered by ESP32S3 & RP2040
SKU: 1670441- Screen:Â 3.95 Inch, Capacitive RGB Touch Screen
- Screen Resolution:Â 480 x 480 pixels
- Power Supply:Â 5V DC, 1A
- Processor: ESP32-S3: Xtensa® dual-core 32-bit LX7, up to 240MHz / RP2040: Dual ARM Cortex-M0+ up to 133MHz
SKU: 1670441 -
IoT Development Boards
Ameba Z2 AWS IoT ExpressLink Devkit – AWS IoT ExpressLink, Wi-Fi & Bluetooth, multiple IO resources, OTA upgrade
IoT Development BoardsAmeba Z2 AWS IoT ExpressLink Devkit – AWS IoT ExpressLink, Wi-Fi & Bluetooth, multiple IO resources, OTA upgrade
SKU: 1488393- MCU: ARMv8M KM4, 100MHz
- Memory: 4.2MB internal RAM on SoC and 2MB external flash on Dev. Board
- Wi-Fi: 802.11 b/g/n 1×1 Wi-Fi (20/40MHz), Wi-Fi simple config
- Bluetooth: BLE 4.2, SIG Mesh (optional)
SKU: 1488393 -
PIR / IR and Optical Sensor
24GHz mmWave Radar Sensor – Fall Detection Module
SKU: 1181673- Operating voltage (VCC) 4.5 ~ 6 V
- Operating current (ICC) 90 ~ 100 mA
- Flexible install location
- Operating I\O Inflow/Output Current (IIO): 20 mA
- Singular fall detection
- Perfect privacy protection
- Harmless working status
SKU: 1181673 -
-
-
IoT Development Boards
SeeedStudio LinkIt Smart 7688 Duo
SKU: 672585- 580 MHz MIPS CPU
- Single input single output(1T1R) Wi-Fi 802.11 b/g/n (2.4G)
- Pin-out for GPIO, I2C, SPI, SPIS, UART, PWM, and Ethernet Port
- 32MB Flash and 128MB DDR2 RAM
- USB host
- Micro SD slot
- Support for Arduino (ATmega32U4)
SKU: 672585 -
Seeed Studio SBC
EdgeBox-RPI-200 – Industrial Edge Controller 4GB RAM, 16GB eMMC, WiFi
SKU: 1529205- CPU Core: 4-core Raspberry Pi CM4
- WiFi: 2.4 GHz, 5.0 GHz IEEE 802.11 b/g/n/ac equipped
- Bluetooth: Bluetooth 5.0, BLE equipped
- Cellular: Mini-PCIe support 4G LTE(Quectel EC20/EC25 tested)
- LoRa: Mini-PCIe support LoRaWAN®(Seeed WM1302 tested)
SKU: 1529205 -
TFT LCD Displays
reTerminal DM – 10.1” Integrated Device Master, Industrial HMI/PLC/Panel PC/Gateway in One, Raspberry Pi CM4 Core, NodeRed Integrated
TFT LCD DisplaysreTerminal DM – 10.1” Integrated Device Master, Industrial HMI/PLC/Panel PC/Gateway in One, Raspberry Pi CM4 Core, NodeRed Integrated
SKU: 1578725- Model: reTerminal DM – 10.1” Integrated Device Master
- CPU: CM4, Quad-core Cortex-A72 at 1.5GHz
- Power Range: 12~24 DC
- Operating Temperature: -10~50 °C
- Max. Resolution: 1280 x 800
SKU: 1578725 -
Seeed Studio SBC
reComputer J3010-Edge AI Device with NVIDIA Jetson Orin Nano 4GB Module
SKU: 1529214- The reComputer J3010-Edge AI Device is a high-performance computing device designed for AI and machine learning applications.
- It features the NVIDIA Jetson Orin Nano 4GB module, which provides excellent processing power for complex computations.
- The device comes with 4xUSB 3.2 ports, allowing for multiple peripheral connections.
- WiFi/BT connectivity is built-in, providing easy access to wireless networks and Bluetooth devices.
- The device has an M.2 Key E and Key M Slot, which allows for expansion with additional hardware.
SKU: 1529214 -
Gas and Dust Sensor
Seeed Studio Grove – Air Quality Sensor(BME688) with built-in AI, High-Performance 4-in-1, Gas, Humidity, Pressure and Temperature sensor
Gas and Dust SensorSeeed Studio Grove – Air Quality Sensor(BME688) with built-in AI, High-Performance 4-in-1, Gas, Humidity, Pressure and Temperature sensor
SKU: 1435396- Product: Seeed Studio Grove – Air Quality Sensor(BME688) with built-in AI, High-Performance 4-in-1, Gas,Humidity, Pressure and Temperature sensor
- High Accuracy
- Thermistor: NCP18WF104F03RC (NTC)
- Grove compatible interface
- Easy to use
SKU: 1435396 -
-
IoT Development Boards
GAPUINO GAP8 Developer Kit with RISC-V Processor
SKU: 921007- Fabric controller core: 16 kB data and 1 KB instruction cache.
- Cluster: 64 kB shared data and 4 kB shared instruction cache.
- All cores support the same extended RISC-V ISA. Extended instructions include SIMD vector, DSP, bit manipulation, etc.
- Multi-channel 1D/2D DMA.
- Specialized multi-channel micro DMA for autonomous peripheral support.
- Programmable Voltage Regulator.
- Real-Time Clock.
SKU: 921007 -
Seeed Studio SBC
reComputer Industrial J4012- Fanless Edge AI Device with Jetson Orinâ„¢ NX 16GB module, Aluminum case with passive cooling
Seeed Studio SBCreComputer Industrial J4012- Fanless Edge AI Device with Jetson Orinâ„¢ NX 16GB module, Aluminum case with passive cooling
SKU: 1613215- The product name is reComputer Industrial J4012.
- Power Supply is DC 12V-24V Terminal block 2 pin
- The display is 1*HDMI 2.0 Type A
- Dimensions (W x D x H) are 159mm*155mm*57mm
SKU: 1613215 -
NVIDIA Boards
NVIDIA Jetson AGX Orin 32GB Developer Kit smallest and most powerful AI edge computer
SKU: 1249210- Product: AI edge computer
- AI Performance: 275 TOPS (INT8)
- GPU: NVIDIA Ampere architecture with 2048 NVIDIAn CUDA cores and 64 Tensor Cores
- Max GPU Freq: 1 GHz
- CPU: 12-core Arm Cortex-A78AE v8.2 64-bit CPU 3MB L2 + 6MB L3
- CPU Max Freq: 2 GHz
SKU: 1249210 -
Seeed Studio SBC
EdgeBox RPI 200 -Industrial Edge Controller 2GB RAM 8GB eMMC WiFi
SKU: 1529204- CPU Core: 4-core Raspberry Pi CM4
- WiFi: 2.4 GHz, 5.0 GHz IEEE 802.11 b/g/n/ac equipped
- Bluetooth: Bluetooth 5.0, BLE equipped
- Cellular: Mini-PCIe support 4G LTE(Quectel EC20/EC25 tested)
- LoRa: Mini-PCIe support LoRaWAN®(Seeed WM1302 tested)
SKU: 1529204 -
Seeed Studio SBC
reComputer J3011-Edge AI Device with NVIDIA Jetson Orinâ„¢ Nano 8GB module, 4xUSB 3.2, WiFi/BT, M.2 Key E & Key M Slot, Aluminum case, Pre-installed Jetpack System with NVIDIA JetPackâ„¢ on 128GB NVMe SSD (Without Adapter)
Seeed Studio SBCreComputer J3011-Edge AI Device with NVIDIA Jetson Orinâ„¢ Nano 8GB module, 4xUSB 3.2, WiFi/BT, M.2 Key E & Key M Slot, Aluminum case, Pre-installed Jetpack System with NVIDIA JetPackâ„¢ on 128GB NVMe SSD (Without Adapter)
SKU: 1529215- The reComputer J3011 is an advanced Edge AI device equipped with NVIDIA Jetson Orinâ„¢ Nano 8GB module for high-performance computing.
- It comes with 4 USB 3.2 ports, WiFi/BT, M.2 Key E & Key M Slot, and an aluminum case for durability and connectivity options.
- The device is pre-installed with the JetPack system using NVIDIA JetPackâ„¢ on a 128GB NVMe SSD for seamless performance and convenience.
SKU: 1529215 -
LORA Module
SenseCAP M1 LoRaWAN Indoor Gateway(4G RAM+SX1302) – EU868
SKU: 1181678- Input Voltage DC 5V – 3A
- Processor Raspberry Pi 4 (Broadcom BCM2711, Quad-core Cortex-A72 (ARM v8) 64-bit SoC @ 1.5GHz)
- RAM: 4GB
- Storage: 64GB MicroSD Card
- Wi-Fi 2.4 GHz and 5.0 GHz IEEE 802.11ac wireless
- Bluetooth 5.0, BLE
- LoRaWAN Supports Class A, C
SKU: 1181678 -
-
-
Raspberry Pi Displays, TFT LCD Displays
Seeed Studio 7 inch 1024×600 Capacitive TouchScreen
SKU: R100173- 7-inch HDMI monitor with capacitive touchscreen
- Tested on Raspberry Pi, BeagleBone Black, Windows 10, and MacBook Pro
- Capacitive touch function for full control
- Supports right mouse button and drag-and-drop functions
SKU: R100173 -
Beagle Board
Seeed Studio BeagleY-AI Single Board Computer
SKU: R110758- Processor: TI AM67A, Quad 64-bit Arm® Cortex®-A53 microprocessor subsystem at up to 1.4 GHz, multiple cores including Arm/GPU processors, DSP, and vision/deep learning accelerators up to 4 TOPS
- RAM: 4GBÂ LPDDR4
- Wi-Fi: Beagleboard BM3301, 802.11ax Wi-Fi
- Bluetooth: Bluetooth Low Energy 5.4 (BLE)
- Expansion Connect: 40-pin header
SKU: R110758
