Drone Parts
Showing 49–96 of 1653 results
-
-
-
GPS Modules
NEO-M8N GPS with Compass for Pixhawk with extra connector for APM
SKU: 57286- Ready to Connect to PIXHAWK FC with 6-pin connector Attached
- Â Receiver type 72-channel M8 engine
- Â Galileo-ready E1B/C (NEO-M8N)
- Â Nav. update rate1 Single GNSS: up to 18 HZ
- Â Acquisition Cold starts: 26 s
- Onboard Compass
SKU: 57286 -
-
-
Flight Controller & Accessories
Pixhawk 2.4.8 Drone Flight Controller PX4 32 Bit Autopilot – Good Quality
Flight Controller & AccessoriesPixhawk 2.4.8 Drone Flight Controller PX4 32 Bit Autopilot – Good Quality
SKU: 29453- Supply Voltage: 7V.
- Processor: 32 Bit Cortex M4 Core
- Bus interface (UART, I2C, SPI, CAN).
- Firmware: Mission planner.
- Sensors: Gyrometer, Accelerometer, Barometer & Magnetometer
- Micro SD card to record flight data.
SKU: 29453 -
Drone Transmitter and Receiver
FLY SKY FS IA6B RF 2.4GHz 6CH PPM output with iBus port receiver
SKU: 33422- Model:FS-iA6B
- Operating Voltage (VDC):4.0 ~ 8.4V
- No. of Channels:6
- No. of Band:140
- Encoding: GFSK.
- RF Range:2.4055–2.475 GHz.
- Rx Sensitivity (dBm):-105
- Antenna Length (mm):26
- Video Format Supported:NTSC/PAL
SKU: 33422 -
-
-
-
GPS Modules
NEO-M8N GPS Module with Ceramic Active Antenna
SKU: 43095- Antenna Size : approx. 26 x 26 x 9Â (LxWxH) mm.
- Module Size : approx. 26 x 36 x 4Â (LxWxH) mm.
- Net weight : approx. 16 gm.
- Gross weight : approx. 17 gm.
- Mounting : approx. 3 mm.
- The default baud rate : 9600.
- Flash memory: 64KB.
SKU: 43095 -
-
-
-
Drone Frame and Accessories
F450 / Q450 Quadcopter Frame(PCB Version with Integrated PCB) + Plastic Landing Gear Combo Kit – Made in INDIA
Drone Frame and AccessoriesF450 / Q450 Quadcopter Frame(PCB Version with Integrated PCB) + Plastic Landing Gear Combo Kit – Made in INDIA
SKU: 28943- Wheelbase: 450mm
- Material: Glass Fiber +Â Polyamide-Nylon
- Weight: 330 gm
- Motor Mounting Hole Dia.: 3 mm
- Arm Size: 220 x 40 (LxW) mm
- Landing Gear Material: ABS
- Landing Gear Height: 200 mm
SKU: 28943 -
-
-
FPV Antennas and Trans-Receivers
TS835 Fpv 5.8G 600Mw 48Ch (2-6S) Wireless Av Transmitter
SKU: 45594- No. of Channels: 48CH
- Antenna Gain: 2db
- Frequency: 5.8G
- Video Format: NTSC / PAL Auto
- 48Â CH compatible with all FPV 5.8g receivers.
- 5.8G 600mW 40 Channels AV wireless FPV transmitter
- Super small 200mA current for 600mW wireless transmitter power.
- 600mW transmitter power assure 5KM distance in open area,
SKU: 45594 -
-
-
Drone Frame and Accessories
F450 / Q450 Quadcopter Frame – PCB Version Frame Kit with Integrated PCB – Made in INDIA
Drone Frame and AccessoriesF450 / Q450 Quadcopter Frame – PCB Version Frame Kit with Integrated PCB – Made in INDIA
SKU: 5948- Wheelbase: 450mm
- Material: Glass Fiber + Polyamide-Nylon
- Motor Mounting Hole Diameter: 3 mm
- Arm Size: 220 x 40 (LxW) mm
- Arm mounting holes (on frame): 3 mm
- Arm mounting holes (on arm): 2 mm
SKU: 5948 -
FPV Antennas and Trans-Receivers
TS832 48Ch 5.8G 600mW Wireless Audio/Video Transmitter for FPV RC
SKU: 29428- Transmitter 600mW/48CH >up to 1km(open area).
-
Frequency control: built-in frequency and phase lock loop.
- Transmitter module connector: Female RP-SMA.
-
Antenna connector: Male RP-SMA.
-
Supply Voltage: 7-24 V
-
Current: 220 mA.
-
48 CH is compatible with all FPV 5.8g receivers.
SKU: 29428 -
-
-
-
Flight Controller & Accessories, Interfacing Cables
DF13 4 Pin Flight Controller Cable
SKU: 58221- Item Name: DF13 4 Pin Flight Controller Cable
- 100% Brand new and high quality.
- Weight: about 3g
- Plug Type: DF 13 4 pin
- Length: 200mm(28AWG).
- Color: Red, and Black
- Useful for connection between the PixHawk and the GPS receiver module. or many receiver connections.
SKU: 58221 -
-
Drone Motor
A2212 1000 KV Brushless DC Motor with SimonK 30A ESC and Orange 1045 Propeller Set
SKU: 5923- Offers great performance and value for money.
- Suitable for airplane, aircraft, quadcopter.
- Motor KV: 1000
- LiPO Batteries: 2S-3S
- Shaft Diameter: 3.17 mm
- ESC used has an On-Board BEC.
- Propeller: Orange HD 1045
SKU: 5923 -
GPS Modules
25x25x8mm 28db High Gain 5cm Length Built-in Ceramic Active GPS Antenna for NEO-6M NEO-7M NEO-8M
GPS Modules25x25x8mm 28db High Gain 5cm Length Built-in Ceramic Active GPS Antenna for NEO-6M NEO-7M NEO-8M
SKU: 1150670- Product: ceramic antenna cable
- Frequency: 1575.42MHz ± 4 MHz
- Antenna gain: 28dB
- Operating temperature: -45 ~ +85
- Polarization: right-hand circular polarization
- Interference suppression: 30dB ± 100MHz
- Weight: 15g
SKU: 1150670 -
GPS Modules
NEO-M8N (Ready To SKY) GPS Module with Compass for APM with extra connector for Pixhawk
SKU: 28952- Â Dimensions: Outer diameter 54mm
- Ready to Connect to All APM FC with 5-pin connector Attached
- Â Receiver type 72-channel M8 engine
- Â Galileo-ready E1B/C (NEO-M8N)
- Â Nav. update rate1 Single GNSS: up to 18 HZ
- Â Position accuracy 22.0 m CEP
- Â Acquisition2 Cold starts: 26 s
- Â Weight: 33gm
-  Sensitivity2 Tracking & Navigation: –167 dBm
- Onboard Compass
SKU: 28952 -
-
-
GPS Modules
GPS/GLONASS GNSS Antenna for Raspberry Pi HAT and Arduino Shield with 3 Meter Cable
SKU: 139684This GPS/GLONASS GNSS Antenna is designed for applications which require high positioning accuracy by combining signals from GPS, GLONASS, systems. The tiny size of this antenna allows it to be used in very space restricted environments.
SKU: 139684 -
-
-
Drone Transmitter and Receiver
FS-SM600 6CH USB Powered Controller with SuperSimX Simulator (Mode 2)
SKU: 79979- Operating Voltage (VDC):12
- No. of Channels:6
- Antenna Length (mm):26
- Certificate: CE
- Code Type:Digital
- Color:Black
- DSC Port:No
- Default Operating Mode:Mode 2 (Left-Hand Throttle)
- Cable Length:1 Mtr.
SKU: 79979 -
Drone Frame and Accessories
Ready to Sky Q450 Quadcopter Frame – PCB Version Frame Kit with Integrated PCB
Drone Frame and AccessoriesReady to Sky Q450 Quadcopter Frame – PCB Version Frame Kit with Integrated PCB
SKU: 1675183- Wheelbase: 450mm
- Material: Glass Fiber + Polyamide-Nylon
- Moter Mounting Hole Diameter: 3 mm
- Arm Size: ~220 x 40 (LxW) mm
- Arm mounting holes (on frame): 3 mm
- Arm mounting holes (on arm): 2 mm
SKU: 1675183
