Categories

Load/Pressure/Force/Flex Sensors

  • 50kg Half-bridge Experiments body Scale load cell sensor resistance strain sensor

    SKU: 31432
     99.00

    (inc GST)

    ₹ 83.9 (+18% GST extra)

    1. Color: Silver
    2. Size: 35 x 35mm
    3. Internal 1000Ohm half-bridge strain gauge load cell, the range is 50kg, half-bridge structure.
    Add to cart
  • Flex Sensor 2.2″ Bend Sensor for Hand Gesture Recognition

    SKU: 22341
     471.00

    (inc GST)

    ₹ 399.15 (+18% GST extra)

    1. Length : 2.2″.
    2. Life Cycle : >1 million.
    3. Height : 0.43mm (0.017″),
    4. Flat Resistance : 10K Ohms ±30%.
    5. Power Rating : 0.5 Watts.
    Add to cart
  • Flex Sensor 4.5″

    SKU: 12222
     943.00

    (inc GST)

    ₹ 799.15 (+18% GST extra)

    1. Angle Displacement Measurement
    2. Bends and Flexes physically with motion device
    3. Simple Construction
    Add to cart
  • FlexiForce A101 Force Sensor

    SKU: 125462
     715.00

    (inc GST)

    ₹ 605.93 (+18% GST extra)

    The A101 is our smallest sensor can measure up to 10 lbs. The dynamic range of this mini force sensor can be modified by changing the drive voltage and adjusting the resistance of the feedback resistor

    Applications:
    1. Testing and Measurement Equipment
    2. Embedded Electronics
    3. OEM Development Kit
    4. Consumer Electronics
    5. Multimeter
    Read more
  • FlexiForce A301/1 Force Sensor

    SKU: 125465
     783.00

    (inc GST)

    ₹ 663.56 (+18% GST extra)

    The A301 is optimized for high volume manufacturing and ideal for embedding into products and applications.

    Applications
    1. Testing and Measurement Equipment
    2. Embedded Electronics
    3. OEM Development Kit
    4. Consumer Electronics
    5. Multimeter
    Read more
  • FlexiForce A401 Force Sensor

    SKU: 125464
     1,123.00

    (inc GST)

    ₹ 951.69 (+18% GST extra)

    The A401 has a 2-pin connector. This is our standard sensor with the largest sensing area  The dynamic range of this large force sensor can be modified by changing the drive voltage and adjusting the resistance of the feedback resistor.

    Applications:
    1. Testing and Measurement Equipment
    2. Embedded Electronics
    3. OEM Development Kit
    4. Consumer Electronics
    5. Multimeter
    Read more
  • FlexiForce A502 Ultra Thin Force Sensor

    SKU: 125463
     1,689.00

    (inc GST)

    ₹ 1431.36 (+18% GST extra)

    A502 sensors are square standard sensors with a 2-pin male connector. They have a force range of 0-222 N (0-50 lb), specified with Tekscan electronics. The model is linear through a much lower range of 0-22N (0-5 lb), and is capable of measuring loads up to 44,482 N (10,000 lb).

    Applications:
    1. Testing and Measurement Equipment
    2. Embedded Electronics
    3. OEM Development Kit
    4. Consumer Electronics
    5. Multimeter
    Read more
  • Force Sensor 5.08mm Circle

    SKU: 17308
     535.00

    (inc GST)

    ₹ 453.39 (+18% GST extra)

    1. Easily customizable to a wide range of sizes
    2. Cost-effective
    3. Ultra-thin; 0.45 mm
    4. Robust; up to 10 million actuations
    5. Simple and easy to Integrate.
    Add to cart
  • Force Sensor Resistor 0.5″ 14.7mm- Pressure Sensor

    SKU: 12233
     628.00

    (inc GST)

    ₹ 532.2 (+18% GST extra)

    Applications:
    1. Testing and Measurement Equipment
    2. Embedded Electronics
    3. OEM Development Kit
    4. Consumer Electronics
    5. Multimeter
    Add to cart
  • Force Sensor Resistor Square 38.1mm – Pressure Sensor

    SKU: 12244
     787.00

    (inc GST)

    ₹ 666.95 (+18% GST extra)

    1. Easily customizable to a wide range of sizes
    2. Cost-effective
    3. Ultra-thin; 0.45 mm
    4. Robust; up to 10 million actuations
    5. Simple and easy to Integrate.
    Add to cart
  • HX711 Dual-Channel 24 Bit Precision A/D weight Pressure Sensor

    SKU: 16925
     157.00

    (inc GST)

    ₹ 133.05 (+18% GST extra)

    1. Output Sensitivity: 1.0 ± 0.1 mV / V
    2. Two selectable differential input channels
    3. On-chip active low noise PGA with the selectable gain of 32, 64 and 128
    4. On-chip power supply regulator for load-cell and ADC analog power supply
    5. On-chip oscillator requiring no external component with optional external crystal
    6. On-chip power-on-reset
    7. Simple digital control and serial interface: pin-driven controls, no programming needed
    8. Measurement Resolution: 24 bit
    9. Selectable 10SPS or 80SPS output data rate
    10. Simultaneous 50 and 60Hz supply rejection
    Add to cart
  • Weighing Load Cell Sensor 1Kg for Electronic Kitchen Scale YZC-131 With Wires

    SKU: 28623
     290.00

    (inc GST)

    ₹ 245.76 (+18% GST extra)

    This straight bar load cell (sometimes called a strain gauge) can translate up to 1 kg of pressure (force) into an electrical signal. Each load cell is able to measure the electrical resistance that changes in response to, and proportional of, the strain (e.g. pressure or force) applied to the bar.

    Add to cart
  • Weighing Load Cell Sensor 3KG For Electronic Kitchen Scale YZC-131 With Wires

    SKU: 28643
     290.00

    (inc GST)

    ₹ 245.76 (+18% GST extra)

    This straight bar load cell (sometimes called a strain gauge) can translate up to 5 kg of pressure (force) into an electrical signal. Each load cell is able to measure the electrical resistance that changes in response to, and proportional of, the strain (e.g. pressure or force) applied to the bar.

    Add to cart
  • Weighing Load Cell Sensor 5kg YZC-131 With Wires

    SKU: 28646
     290.00

    (inc GST)

    ₹ 245.76 (+18% GST extra)

    1. Model: YZC-131A
    2. Dimensions: 75 x 12.7 x 12.7 mm (L x W x H)
    3. Range: 5 kg
    4. Cable Length: 18 cm
    5. Fitting ScrewHole Size:  M3
    6. Rated output: 1.0 0.1mV / V
    7. Nonlinear: 0.05% F.S
    8. Hysteresis: 0.0% F.S
    9. Repeatability: 0.05% F.S
    Add to cart
  • YZC-133 Weighing Load Cell Sensor 10kg For Electronic Weighing Scale

    SKU: 28647
     349.00

    (inc GST)

    ₹ 295.76 (+18% GST extra)

    This straight bar load cell (sometimes called a strain gauge) can translate up to 10 kg of pressure (force) into an electrical signal. Each load cell is able to measure the electrical resistance that changes in response to, and proportional of, the strain (e.g. pressure or force) applied to the bar.

    Add to cart
  • YZC-133 Weighing Load Cell Sensor 20kg For Electronic Weighing Scale

    SKU: 28651
     349.00

    (inc GST)

    ₹ 295.76 (+18% GST extra)

    1. Rated Load: 20Kg
    2. Rated Output: 1.0 ±0.15mV/V
    3. Zero Output: ±0.1mV/V
    4. Cree: 0.03%F.S./30min
    5. Input End: Red+, Black-
    6. Output End: Green+, White-
    7. Input Impedance: 1115±10% Ω
    Add to cart