Quadcopters
Showing 49–96 of 120 results
-
-
Drone Frame and Accessories
PDB-XT60 with BEC 5V and 12V
SKU: 57854- 4-layers and 1.6mm PCB
- Built-in XT60 Socket
- Total 6 pairs ESC solder tabs are fit for H or X type frame
- Regulated 5V and 12V outputs
- Short circuit tolerantInput voltage range: 9 – 18V DC (3S-4S LiPoly operation)
- Output continuous current:Â 25Ax4 or 15Ax6
- Output Peak current (10 seconds/minute):Â 30Ax4 or 20Ax6
- Short-circuit tolerant:Â 5 seconds/minute
SKU: 57854 -
-
-
Drone Transmitter and Receiver
FS-IA6 6CH AFHDS 2A 2.4G Radio Receiver
SKU: 57462- Channels: 6 Channels
- Model type: Airplane / Glider / Helicopter / Multirotor
- Frequency range: 2.4–2.48GHZ
- Bandwidth number: 160
- Transmitting power: not more than 20dBm
- RF receiver sensitivity: -105dbm
- 2.4G modes: automatic frequency second generation digital systems
- Encoding: GFSK
- Data acquisition interface: None
SKU: 57462 -
Drone Frame and Accessories
Q250 Quadcopter Super Strong Carbon Fiber 4mm Arm FPV Racing Frame(250mm) Kit
Drone Frame and AccessoriesQ250 Quadcopter Super Strong Carbon Fiber 4mm Arm FPV Racing Frame(250mm) Kit
SKU: 32660- Wheelbase: 250mm
- Material: Full Carbon Fiber
- Weight: 160 gm
- The arm equips dampers for the safe landing.
- The arm has multiple motor mounting holes.
- Equips vibration-free mounting bracket for FPV camera.
SKU: 32660 -
3 Cell Orange LiPo (11.1V ~ 12.6V)
Orange 11.1V 1000mAh 30C 3S Lithium Polymer Battery Pack
SKU: 23749- Model No:Â ORANGE 1000/3S-30C
- Weight : 85 gm
- Voltage : 11.1V
- Dimensions : 19.5 x 34 x 72(mm )
- Max Continuous Discharge : 30C(30A)
- Balance Plug : JST-XH
- Max Burst Discharge : 60C(60A)
- Discharge Plug : XT-60
- Charge Rate : 1-3C Recommended, 5C Max
SKU: 23749 -
-
-
3 Cell Orange LiPo (11.1V ~ 12.6V)
Orange 11.1V 2200mAh 40C 3S Lithium Polymer Battery Pack
SKU: 30983- Model No: ORANGE 2200 3S-40C
- Weight :Â 175.0g.
- Voltage :Â 11.1V.
- Dimensions : 105 x34 x 22 mm
- Max Continuous Discharge : 40C(88.0A)
- Balance Plug : JST-XH
- Max Burst Discharge : 80C(176.0A)
- Discharge Plug : XT-60
SKU: 30983 -
-
-
Drone Frame and Accessories
Q250 Quadcopter Strong Carbon Fiber 3mm Arm FPV Racing Frame(250mm) Kit
SKU: 32643- Wheelbase: 250mm
- Material: Full Carbon Fiber
- Weight: 160 gm
- The arm equips dampers for the safe landing.
- The arm has multiple motor mounting holes.
- Equips vibration-free mounting bracket for FPV camera.
SKU: 32643 -
Best Prices, GPS Modules
NEO-6M GPS Module with EPROM
SKU: 11782- 5Hz position update rate.
- The cold start time of 38 s and Hot start time of 1 s.
- Configurable from 4800 Baud to 115200 Baud rates. (default 9600).
- SuperSense ® Indoor GPS: -162 dBm tracking sensitivity.
- Support SBAS (WAAS, EGNOS, MSAS, GAGAN).
- Separated 18 x 18mm GPS antenna.
SKU: 11782 -
-
Drone Motor
A2212 1000 KV Brushless DC Motor with SimonK 30A ESC and Orange 1045 Propeller Set
SKU: 5923- Offers great performance and value for money.
- Suitable for airplane, aircraft, quadcopter.
- Motor KV: 1000
- LiPO Batteries: 2S-3S
- Shaft Diameter: 3.17 mm
- ESC used has an On-Board BEC.
- Propeller: Orange HD 1045
SKU: 5923 -
-
Drone Transmitter and Receiver
FS-SM600 6CH USB Powered Controller with SuperSimX Simulator (Mode 2)
SKU: 79979- Operating Voltage (VDC):12
- No. of Channels:6
- Antenna Length (mm):26
- Certificate: CE
- Code Type:Digital
- Color:Black
- DSC Port:No
- Default Operating Mode:Mode 2 (Left-Hand Throttle)
- Cable Length:1 Mtr.
SKU: 79979 -
Drone Transmitter and Receiver
X6B 2.4G 6CH i-BUS PPM PWM Receiver for AFHDS
SKU: 57636- Channels: 6(PWM), 8(PPM), 18(i-BUS)Model
- DSC port: PPM/PWM/i-BUS
- Dual Antenna
- Range: >300m
- Weight: 12 gm(Whole assembly)
- Compatible Transmitter: All AFHDS 2A Transmitter, for example, FS-i10 FS-i6, FS-i6S, FS-i6X, FS-i4, FS-i4X.
SKU: 57636 -
Drone Frame and Accessories
100A Multirotor ESC Power Distribution Battery Board For Quadcopter
SKU: 28954- Material: glass fiber
- Compatible with MK KK flight control installment pitch of holes
- Compatible with MK KK flight control system
- Can connect 1-8 ESC.
- Board Dimensions : 50 x 50 x 2 mm.
- Weight:Â 8 gm.
- Hole Spacing: 45mm Square and 35mm Square (Compatible with KK 45mm spacing)
SKU: 28954 -
-
Drone Frame and Accessories
S500 Multi Rotor Air PCB Frame with High Landing Gear for FPV Quad-Copter
Drone Frame and AccessoriesS500 Multi Rotor Air PCB Frame with High Landing Gear for FPV Quad-Copter
SKU: 694694- Model: S500.
- Frame Weight: 405gm
- Wheelbase: 500 mm
- Moter Mounting Hole Dia.: 3 mm
- Landing Gear Material: ABS
- Arm Size: 220 x 40 mm.
- Landing Gear Length: 200mm
This Kit comes with All different Alen head Bolts we recommend you to buy Allen Key set for Assembly
SKU: 694694 -
Drone Transmitter and Receiver
FS-RX2A Pro Radio Receiver
SKU: 57666- Item name: FS-RX2A Radio receiver
- Channel: 10
- RF Range: 2.408-2.475GHZ
- Number of bands: 135
- RX Sensitivity: -92dBm
- 2.4GHz protocol: AFHDS 2A
- Signal output: IBUS, PPM
- Compatible Transmitter: All AFHDS 2A Transmitter,
- Ex.: FS-I6, FS-I6X, FS-I6S, FS-TM8, FS-TM10, FS-I10.
SKU: 57666 -
FPV Antennas and Trans-Receivers
RC832 Plus 5.8G 48CH Wireless AV Receiver
SKU: 57268- Operating Voltage: 12VDC
- Working current:Â 200mA max.
- Video format:Â NTSC/PAL auto.
- Control Range: Approx 5 KM
- 48 channels: Cover A, B, E, F, HÂ bands and L bands.
- Â Power off memory for last channel and band.
- Â Dual Independent video and audio signal outputs.
SKU: 57268 -
Drone Transmitter and Receiver
Mini Radio Receiver 2.4GHz Compatible with Flysky PPM & SBUS Remote Control Transmitter
Drone Transmitter and ReceiverMini Radio Receiver 2.4GHz Compatible with Flysky PPM & SBUS Remote Control Transmitter
SKU: 45665- Modulation type: GFSK
- DSC port: PPM/I-BUS/S.BUS
- Antenna length: 26mm(not including brass contacts)
- Power input: 4.0-8.4V
- No ground interference( transmitting and receiving 1m from the ground): >300m
- Operating current:40mA
- Channel delay: <15ms
SKU: 45665 -
FPV Antennas and Trans-Receivers
DIYÂ RX5808Â 5.8G 40CH diversity FPV receiver with OLED display for FPV racer Quad
FPV Antennas and Trans-ReceiversDIYÂ RX5808Â 5.8G 40CH diversity FPV receiver with OLED display for FPV racer Quad
SKU: 29729- Auto Search Signal
- Auto seamless switching signal between 2 receivers
- Suitable for High-Speed Racing Quad
- Suitable for HD Aerial Photography
- Suggest using a clover antenna and a panel connector for long and short distance.
SKU: 29729 -
-
-
-