Seeed Studio
Showing 145–192 of 283 results
-
Advance Development Boards
Sipeed M1 dock suit ( M1 dock + 2.4 inch LCD + OV2640 ) K210 Dev. Board for Edge Computing
Advance Development BoardsSipeed M1 dock suit ( M1 dock + 2.4 inch LCD + OV2640 ) K210 Dev. Board for Edge Computing
SKU: 788883- 28nm process, dual-core RISC-V 64bit IMAFDC, on-chip huge 8MB high-speed SRAM (not for XMR :D), 400MHz frequency (able to 800MHz)
- KPU (Neural Network Processor) inside, 64 KPU which is 576bit width, supports convolution kernels, any form of the activation function.Â
- APU (Audio Processor) inside, support 8mics, up to 192KHz sample rate, hardcore FFT unit inside, easy to make a Mic Array (MAIX offer it too)
SKU: 788883 -
TFT LCD Displays
ESP32-S3AÂ Development board -WT32 4.3 Inch Display,Smart Panlee Smart Serial LCD Module
TFT LCD DisplaysESP32-S3AÂ Development board -WT32 4.3 Inch Display,Smart Panlee Smart Serial LCD Module
SKU: 1488394- SoC: ESP32-S3 module
- CPU: Xtensa® dualÂcore 32Âbit LX7 microprocessor
- MCU: WT32-S3-WROVER-N16R8
- Connectivity: 2.4 GHz WiÂFi (802.11 b/g/n) and Bluetooth® 5 (LE) module
- Display: 4.3 Inch 480*272 RGB interface LCD display
SKU: 1488394 -
Cooling Fans
Jetson Nano Module Active Heat Sink – 7 blades Fan for active cooling, PWM for Speed Control, compatible to reComputer J10 series, Nvidia Jetson Nano
Cooling FansJetson Nano Module Active Heat Sink – 7 blades Fan for active cooling, PWM for Speed Control, compatible to reComputer J10 series, Nvidia Jetson Nano
SKU: 1341429- Brand: Seeed Studio
- Product: Jetson Nano Module Active Heat Sink – 7 blades Fan
- Rated Power: 4 watt
- Rated Speed: 5500 RPM
- Air Flow: 2.95 CFM
SKU: 1341429 -
-
Seven Segment Display
SeeedStudio Grove 0.54″ Red Dual Alphanumeric Display
SKU: 1135204- Supply voltage: 3.3V / 5V
- Operating ambient temperature: -30°C to 85°C
- LED DisplayJM-S05422AH-001
- LED Controller Driver: HT16K33
- LED Color: Red
- Ultra-high brightness: 30mcd
- LED height: 0.54inch
- LED segment: 14
- Size: 40 * 40mm
- Output interface: I2C
- I2C Address(Selectable) 0x70(Default)
SKU: 1135204 -
Seeed Studio SBC
SeeedStudio BeagleBone Green Module
SKU: 672597- AM335x 1GHz ARMR Cortex-A8 Processor
- 512MB DDR3 RAM
- 4GB 8-bit eMMC onboard flash storage
- 3D graphics accelerator
- NEON floating-point accelerator
- 2x PRU 32-bit microcontrollers
- USB client for power & communications
- USB host
- Â Ethernet
SKU: 672597 -
TFT LCD Displays
reTerminal – Embedded Linux with Raspberry Pi CM4 and 5-Inch Capacitive Multi-Touch Screen
TFT LCD DisplaysreTerminal – Embedded Linux with Raspberry Pi CM4 and 5-Inch Capacitive Multi-Touch Screen
SKU: 962315- 5-Inch IPS capacitive multi-touch screen.
- Cryptographic co-processor with secure hardware-based key storage.
- High-speed expansion interface with a PCIe 1-lane Host, Gen 2 (5Gbps), USB 2.0 port, 28 GPIOs, and PoE.
- Supports video output at 5K resolution
SKU: 962315 -
PIR / IR and Optical Sensor
MR60FDA1 60GHz mmWave Sensor – Fall Detection Pro Modul
SKU: 1488397- The radius of movement of people detection [1] is 6 meter
- Frequency 60 GHz
- Fall monitoring radius [2]Â 2.5 meter
- Radar detection angle (horizontal) 100 degrees
- Radar detection angle (pitch) 100 degree
SKU: 1488397 -
Temperature & Humidity Sensor
SenseCAP Indicator D1, 4-Inch Touch Screen IoT development platform powered by ESP32S3 & RP2040
Temperature & Humidity SensorSenseCAP Indicator D1, 4-Inch Touch Screen IoT development platform powered by ESP32S3 & RP2040
SKU: 1670439- Screen:Â 3.95 Inch, Capacitive RGB Touch Screen
- Screen Resolution: 480 x 480 pixels
- Power Supply:Â 5V DC, 1A
- Processor: ESP32-S3: Xtensa® dual-core 32-bit LX7, up to 240MHz / RP2040: Dual ARM Cortex-M0+ up to 133MHz
- Flash:Â ESP32S3: 8MB/ RP2040: 2MB
- External Storage:Â Support up to 32GB Micro SD Card (not included)
SKU: 1670439 -
Development Board on Sale, Seeed Studio SBC
reComputer Jetson-20-1-H2 with Jetson Xavier NX module, Aluminium Case, Pre-Installed JetPack System (Without Adapter)
Development Board on Sale, Seeed Studio SBCreComputer Jetson-20-1-H2 with Jetson Xavier NX module, Aluminium Case, Pre-Installed JetPack System (Without Adapter)
SKU: 1252362- 6-core NVIDIA Carmel ARM®v8.2 64-bit CPU 6MB L2 + 4MB L3
- 384-core NVIDIA Volta™ GPU with 48 Tensor Cores
- port, 4 USB 3.0Â Type-A ports, HDMI port and DP ports
- DC Jack 19V 90W 4.74A MAX
- 1 x RJ45 Gigabit Ethernet Connector (10/100/1000)
- 16 GB 128-bit LPDDR4x @ 59.7GB/s
SKU: 1252362 -
-
Bluetooth, WIFI and Trans-receiver ICs
Seeed Studio Wio-WM1110 Dev Kit, built-in Semtech LR1110 and Nordic nRF52840
Bluetooth, WIFI and Trans-receiver ICsSeeed Studio Wio-WM1110 Dev Kit, built-in Semtech LR1110 and Nordic nRF52840
SKU: 1670444- LoRa®WAN Protocol: V1.0.4
- Frequency: 863~928MHz
- Sensitivity: -125dBm @125K/SF7 ,-141dBm @125K/SF12
- Output Power: 20dBm max @LoRa®
- Positioning Technology: GNSS(GPS,BeiDou),WiFi
SKU: 1670444 -
-
-
-
Gas and Dust Sensor
Seeed Studio Grove -Smart Air Quality Sensor-SGP41,MOX gas sensor for VOCs & NOx, Air Purifier, Smart Ventilation
Gas and Dust SensorSeeed Studio Grove -Smart Air Quality Sensor-SGP41,MOX gas sensor for VOCs & NOx, Air Purifier, Smart Ventilation
SKU: 1670432- Long-term Stability: It boasts exceptional long-term stability and durability, making it suitable for continuous monitoring of indoor air quality over extended periods.
- Compact and Flexible:Â It has a 4-pin Grove interface for easy microcontroller connection and supports both 3.3V and 5V power supply, making it versatile for various applications.
- Reliable and Reproducible:Â Sensirion’s state-of-the-art production process guarantees high reproducibility and reliability of the SGP41 module
SKU: 1670432 -
-
Seeed Studio SBC
reComputer J101 Dev Kit Carrier Board for Jetson Nano, With micro SD card slot
SKU: 1358404- Model: reComputer J101
- Module Compatibility: Jetson Nano series
- Power supply: 3.3V
- Micro SD card: 1 x Micro SD card slot (48MHz CLK Frequency)
- PCB Size / Overall Size: 100mm x 80mm
SKU: 1358404 -
-
-
-
IoT Development Boards
Sipeed MAIX-I module w/o WiFi ( 1st RISC-V 64 AI Module, K210 inside )
SKU: 755023- Up to 8 channels of audio input data, ie 4 stereo channels
- Simultaneous scanning pre-processing and beamforming for sound sources in up to 16 directions
- 16-bit wide internal audio signal processing
- Dual-core RISC-V 64bit IMAFDC, on-chip huge 8MB high-speed SRAM (not for XMR :D), 400MHz frequency
- Up to 192kHz sample rate
SKU: 755023 -
-
OLED Display
SeeedStudio Grove OLED Display 0.96”
SKU: 1135214- Power Voltage (VCC): 3.3~5.5 V
- Driver IC: SSD1308Z
- Display Color: White
- Dot Matrix: 128×64
- Panel Size: 26.7(W)×19.26(H)mm
- Active Area: 21.74(W)×11.175 (H)mm
- Dot Pitch: 0.17(W)×0.175 (H)mm
- Dot Size: 0.15(W)×0.15 (H)mm
- Wide range of operating temperature:20~70℃
SKU: 1135214 -
-
PIR / IR and Optical Sensor
Seeed Studio Grove Smart IR Gesture Sensor, infrared camera sensor, AI algorithm, over 15 gestures detection, I2C, SPI, support Grove, XIAO, Type-C connecting, 3.3V/5V
PIR / IR and Optical SensorSeeed Studio Grove Smart IR Gesture Sensor, infrared camera sensor, AI algorithm, over 15 gestures detection, I2C, SPI, support Grove, XIAO, Type-C connecting, 3.3V/5V
SKU: 1770546- Infrared camera sensor: PAG7646J1
- Onboard LED fill light: AU3838A-ZRR-1000mA
- Power supply: 3.3v/5v
- Detection range: 5 to 40cm
SKU: 1770546 -
