Seeed Studio
Showing 49–96 of 283 results
-
-
Shield for Arduino
SeeedStudio Grove Beginner Kit for Arduino
SKU: 601890- Operating voltage: 5 V
- Tutorials for guidance
- Fully compatible with Arduino UNO
- High performance, low power 8 bit ATmega328 MU microcontroller
- Serial converter CP2102N chip (to communicate the Seeeduino with a computer by using a micro-USB cable)
- 2 on-board Grove connectors
- 14 Digital I/O Pins (6 PWM outputs)
- 6 Analog inputs
- ISP header
- Arduino UNO-R3 shield compatible
- Micro USB programming and power supply
- Supports Windows, Mac OS, and Linux
SKU: 601890 -
IMU, Accelerometer, Magnetometer & Gyroscope
SeeedStudio Grove 3 Axis Digital Accelerometer
SKU: 597492- Durable with 10,000g high shock survivability
- Low power and low profile capacitive MEMS sensor
- Configurable samples per second rate
- 3 axis motion/orientation sensing
- Digital output (I2C)
- Off mode current: 0.4μA
- Standby mode current: 2μA
- Active mode current: 47 μA at 1 ODR
- Test range: ±1.5g
- Sensitivity: 21LSB/g
- Suli-compatible library
SKU: 597492 -
-
Temperature & Humidity Sensor
Grove – I2C High Accuracy Temperature Sensor(MCP9808)
SKU: 765928- Operating Voltage:3.3V/5V
- Operating Range:-40°C to +125°C
- Digital Interface: I2C standard 400 kHz
- User-programmable registers, allow for user-selectable settings
- I2C interface works great with Arduino
SKU: 765928 -
-
-
RTC Module
SeeedStudio Grove RTC
SKU: 599811- Vcc: 3.3 V to 5.5 V
- Battery voltage: 2.0V to 3.5 V
- ROHS: YES
- I2C serial interface
- Programmable square-wave output signal
- 56-byte, battery-backed, NV RAM for data storage
- Automatic power-fail detect and switch circuitry
- Counting of time intervals valid up to 2100
- Consumes less than 500nA in battery-backup mode
SKU: 599811 -
-
-
-
Thermal Cameras, Temperature & Humidity Sensor
SeeedStudio Grove – Thermal Imaging Camera – MLX90614 DCC IR Array with 35- FOV
Thermal Cameras, Temperature & Humidity SensorSeeedStudio Grove – Thermal Imaging Camera – MLX90614 DCC IR Array with 35- FOV
SKU: 861299- Based On MLX90614 DCC IR Array with 35° FOV
- Compatible With Grove Ecosystem By SeeedStudio
- I2C Interface to Communicate with MCU
- Wide temperature measurement range (-70℃~380℃)
SKU: 861299 -
Water TDS, pH, Flow, Level and Pressure Sensor
SeeedStudio Grove EC Sensor Kit (DJS1CBlack )
SKU: 765922- Operating voltage: 3.3V/5V
- EC Range : 0-2000us/cm
- Resolution: ±5%(STP)
- Operating temperature: 5-80℃
- Response time: ＜10sec
- Compact size for easy deployment
- Support with both Arduino and Rasberry Pi
SKU: 765922 -
IoT Development Boards
Realtek AMB82-Mini IoT AI Camera Arduino Dev. Board
SKU: 1529213- 8-in-1 SoC featuring embedded AI & NPU, High resolution up to 2K
- Fast boot-up in milliseconds; ultra-low power in microampere
- Supporting battery-powered, AI & IoT Ecosystems
- Multiple streams real-time H.265/H.264/JPEG encoding
- SDK supports free RTOS, IAR, GCC, Arduino IDE
SKU: 1529213 -
Sensor Kits
SeeedStudio Grove Creator Kit – Gamma (40 in 1 Sensor Kit)
SKU: 606654- Carefully selected Grove sensors (input) and actuators (output)
- 40 different Grove modules in a kit
- All modules are packed in protective plastic bags
- Grove connector cables
- Compatible with:
i) Arduino, requires Grove Base Shield
ii) Raspberry Pi, requires GrovePi HAT
iii) micro:bit, requires BitMaker or BitMaker Lite
SKU: 606654 -
Bluetooth and NRF Modules
HM-BT4502 Bluetooth Low Energy (BLE) Pass-through Module
SKU: 755016- Universal serial port design, full-duplex two-way communication, minimum baud rate support 9600 bps
- Default connection interval is 30 millisecond, fast connection
- Support 2M symbol transmission and 244 bytes packet transmission
- Support AT commands for basic settings
SKU: 755016 -
Compatible with Arduino Boards
SeeedStudio Grove Shield for Seeeduino XIAO
SKU: 778510- Power Supply: 5V / 3.7V Lithium Battery
- Load Capacity: 800mA
- On-board Lithium Battery Charging and Management Function
- Grove connectors (Grove IIC*2, Grove UART*1), all 14 GPIO led out
- Compact and Breakable Design
SKU: 778510 -
-
IoT Development Boards
Sipeed Maixduino Kit for RISC-V AI + IoT
SKU: 790008- Supply voltage of external power supply: 4.8V ~ 5.2V
- Supply current of external power supply :>600mA
- Temperature rise: <30K
- Frequency Range: 2400Mhz – 2483.5Mhz
- Onboard ESP32 module support 2.4G 802.11. b/g/n and Bluetooth 4.2
SKU: 790008 -
Other Sensors
SeeedStudio Grove High Precision Barometer Sensor (DPS310)
SKU: 672599- High-Pressure Precision: ± 0.002 hPa (or ±0.02 m)
- High Pressure Accuracy: ± 0.06 hPa (or ±0.5 m)-Relative; ± 1 hPa (or ±8 m)-Absolute
- Wide Range: Pressure: 300 –1200 hPa; Temperature: -40 – 85 °C.
- Easy to Use: Grove IIC (with interrupt) / SPI
- Low power consumption
SKU: 672599 -
-
Water TDS, pH, Flow, Level and Pressure Sensor
SeeedStudio Grove ORP Sensor Kit (501Z)
SKU: 765933- Work voltage: 3.3V/5V
- Work temperature: 5℃-70℃
- Support with both Arduino and Rasberry Pi.
- RangeReference electrode internal resistance: ≤10k
- Resolution Electrode stability: ±8mv/24
- Compact size for easy deployment.
Â
SKU: 765933 -
-
PIR / IR and Optical Sensor
SeeedStudio Grove VOC and eCO2 Gas Sensor (SGP30)
SKU: 1135221- Working Voltage:3.3V/5V
- Output range :
- TVOC 0 ppb to 60000ppb ,
- COâ‚‚eq 400 ppm to 60000 ppm
- Sampling rate:
- TVOC 1HZ
- COâ‚‚eq 1HZ
- Resoulation:
- TVOC :0 – 2008 ppb / 1 ppb
2008 – 11110 ppb / 6 ppb
11110 – 60000 ppb / 32 ppb - COâ‚‚eq :400 – 1479 ppm / 1 ppm
1479 -5144 ppm / 3 ppm
5144 – 17597 ppm / 9 ppm
17597 – 60000 ppm / 31 ppm
- TVOC :0 – 2008 ppb / 1 ppb
- Default I2C address 0X58
SKU: 1135221 -
Advance Development Boards
Sipeed Longan Nano RISC-V GD32VF103CBT6 Development Board
SKU: 755021- Chip built-in 128KB Flash, 32KB SRAM
- 4 x general purpose 16-bit timer, 2 x basic 16-bit timer, 1 x advanced 16-bit timer
- Watchdog, RTC, Systick
- 3 x USART, 2 x I2C, 3 x SPI, 2 x I2S, 2 x CAN, 1 x USBFS (OTG)
- 2 x ADC (10 channel), 2 x DAC
SKU: 755021 -
Thermal Cameras
SeeedStudio Grove -Thermal Imaging Camera-MLX90641 16×12 IR Array with 110 Degree FOV
Thermal CamerasSeeedStudio Grove -Thermal Imaging Camera-MLX90641 16×12 IR Array with 110 Degree FOV
SKU: 672589- Manufacturer Part Code: 101020892
- Temperature measurement range:-40℃~300℃
- I2C Grove interface
- Input Supply Voltage: 3 ~ 5 VDC.
- High FOV (field-of-view) of 110°x75° to capture more area
- Wide temperature measurement range (-40℃~300℃)
- I2C Grove interface for easy communication with an MCU
- Fully calibrated IR array for convenient setup
SKU: 672589 -
-
-
-
