Raspberry Pi Hats
Showing 49–96 of 116 results
-
Raspberry Pi Hats
Waveshare Extended 4-Ch PCIe Gen 2 ×1 Expander Stable Performance Driver-Free
SKU: 1219065- Extending 1-ch PCIe to 4-ch PCIe Gen 2 × 1 sockets, PCIe Gen 1 × 1 compatible
- Flexible power supply options: powered from either PCIe 12V, OR from 12V DC header
- Adopts ASM1184 controller, driver-free, plug and play
SKU: 1219065 -
Raspberry Pi Hats
Waveshare Nano Base Board (B) for Raspberry Pi Compute Module 4, Same Size as the CM4
Raspberry Pi HatsWaveshare Nano Base Board (B) for Raspberry Pi Compute Module 4, Same Size as the CM4
SKU: 1231454- Power Input: 5V
- Connector: Raspberry Pi 40PIN GPIO interface × 1
- USB: USB 2.0 Type A interface × 1
- Camera: MIPI CSI-2 port × 1 (15pin 1.0mm FPC connector)
- Storage: Micro SD card socket for Compute Module 4 Lite (without eMMC) variants
SKU: 1231454 -
Raspberry Pi Hats
Waveshare Nano Base Board (A) for Raspberry Pi Compute Module 4, Same Size as the CM4
Raspberry Pi HatsWaveshare Nano Base Board (A) for Raspberry Pi Compute Module 4, Same Size as the CM4
SKU: 1231453- Power Input: 5V
- Connector: Raspberry Pi 40PIN GPIO interface × 1
- USB: USB 2.0 Type A interface × 1
- Camera: MIPI CSI-2 port × 1 (15pin 1.0mm FPC connector)
- Storage: Micro SD card socket for Compute Module 4 Lite (without eMMC) variants
SKU: 1231453 -
Boards Compatible with Arduino, Raspberry Pi Hats
Waveshare Arduino Compatible Base Board For Raspberry Pi Compute Module 4, HDMI, USB, M.2 Slot
Boards Compatible with Arduino, Raspberry Pi HatsWaveshare Arduino Compatible Base Board For Raspberry Pi Compute Module 4, HDMI, USB, M.2 Slot
SKU: 1231450- Power Input: 5V
- CM4 Socket: suitable for all variants of Compute Module 4
- Connector: M.2 M KEY slot, for connecting communication module or NVME SSD; Arduino compatible GPIO header
- USB: USB 2.0 Type A x 1
- Camera: MIPI CSI-2 × 1 (15pin 1.0mm FPC connector)
SKU: 1231450 -
Raspberry Pi Hats
Waveshare Isolated RS485 RS232 Expansion HAT for Raspberry Pi, SPI Control
SKU: 1231452- Serial port expansion chip: SC16IS752
- OPERATING VOLTAGE: 5V
- RS485 transceiver: SP3485
- Based on Raspberry Pi 40pin GPIO interface, suitable for Raspberry Pi series motherboards
- Using SC16IS752 and SP3485, SP3232 multi-chip combination scheme, can realize SPI to RS485, RS232, the communication rate is up to 921600bps
- RS485 transceiver: SP3485
- RS232 transceiver: SP3232
- Communication Interface: SPI
- DATA RATE: Up to 921600bps
SKU: 1231452 -
-
Raspberry Pi Hats
Waveshare L76X Multi-GNSS HAT for Raspberry Pi, GPS, BDS, QZSS
SKU: 968482- Power supply voltage: 5V / 3.3V
- Operating current: 13mA
- Protocols: NMEA 0183, PMTK
- GNSS antenna connector
- CAT24C32:Â EEPROM
- RT9193-33:Â power manager
- Battery holder:Â supports ML1220 rechargeable battery, for preserving ephemeris information and hot starts
SKU: 968482 -
Raspberry Pi Hats
Raspberry PI IQ Audio DGAmp+
SKU: 910638- HAT compliant accessory; EEPROM, mounting holes
- Full-HD audio – up to 24-bit/192kHz playback
- Up to 2x35w of crystal clear amplification
- No soldering required to your Raspberry Pi
- ound card – access to gpio yes
- Sound card – type amp
SKU: 910638 -
Raspberry Pi Hats
Waveshare Industrial IoT Wireless Expansion Module Designed for Raspberry Pi Compute Module 4 (Without Power Adapter)
Raspberry Pi HatsWaveshare Industrial IoT Wireless Expansion Module Designed for Raspberry Pi Compute Module 4 (Without Power Adapter)
SKU: 1144683- CM4 SOCKET: suitable for all variants of Compute Module 4
- NETWORKING: Gigabit Ethernet RJ45
- M.2 B KEY / Mini-PCIe (via adapter), for connecting 5G / 4G / LoRa wireless module
- Nano-SIM card slot, supports standard Nano-SIM card for 5G/4G/3G/2G communication
- USB USB: 2.0 × 3
SKU: 1144683 -
-
Raspberry Pi Hats
Waveshare USB 3.2 Gen1 And Gigabit Ethernet HUB HAT for Raspberry Pi 3x USB 1x Gigabit ETH Driver-Free
Raspberry Pi HatsWaveshare USB 3.2 Gen1 And Gigabit Ethernet HUB HAT for Raspberry Pi 3x USB 1x Gigabit ETH Driver-Free
SKU: 1113365- Driver-free, plug and play, compatible with OS including Windows, Mac OS, Linux, and Android
- Purpose-made for Raspberry Pi 4, compatible with other Raspberry Pi versions as well
- Comes with development resources and manual
SKU: 1113365 -
Raspberry Pi Hats
Waveshare GPIO Expander For Raspberry Pi Pico, 1x Raspberry Pi Standard 40PIN, 1x Pico 2?20PIN
Raspberry Pi HatsWaveshare GPIO Expander For Raspberry Pi Pico, 1x Raspberry Pi Standard 40PIN, 1x Pico 2?20PIN
SKU: 1094953- Center female pin header for direct attaching the Raspberry Pi Pico.
- Extra USB connector for external power supply.
- Immersion Gold Process
- Black Base Panel, White Pinout Labels, Golden Rounded Outline, Stunning Aesthetic
SKU: 1094953 -
-
Raspberry Pi Hats
Waveshare Ethernet / USB HUB HAT (B) for Raspberry Pi Series, 1x RJ45, 3x USB 2.0
SKU: 1063365- 3x extended USB ports, compatible with USB 2.0 / 1.1
- Incorporates RTL8152B Ethernet chip, supports 1x RJ45 Ethernet port, 10/100M auto-negotiation
- Pogo pin design, for directly connecting with Raspberry Pi Zero/Zero W/Zero WH
SKU: 1063365 -
-
Raspberry Pi Hats
Waveshare Pioneer600, Raspberry Pi Expansion Board
SKU: 975819- AD/DA IO interface :Â screw terminal
- 1-WIRE interface :Â for connecting 1-WIRE devices like DS18B20
- Sensor interface :Â for connecting various sensors
- 0.96inch OLED : SSD1306 driver, 128×64 resolution, SPI interface
- Buzzer
- CP2102 :Â USB TO UART converter
- PCF8591 :Â 8-bit AD/DA converter, I2C interface
SKU: 975819 -
Raspberry Pi Hats
Waveshare SX1268 LoRa HAT for Raspberry Pi 433MHz Frequency Band
SKU: 968495- SX1268 LoRa module
- 74HC125V:Â voltage level translator
- CP2102:Â USB TO UART converter
- Working bands: 410.125 ~ 493.125MHz
- Receive Sensitivity: [email protected] (On-air)
- Interface: UART
- Range: 5KM(Sunny day; open area; Antenna: AUX 5dBi, Height 2.5m; Air Speed: 2.4kbps)
SKU: 968495 -
Raspberry Pi Hats
Waveshare SX1262 LoRa HAT for Raspberry Pi 915MHz Frequency Band
SKU: 968494- SX1262 LoRa module
- 74HC125V:Â voltage level translator
- CP2102:Â USB TO UART converter
- Working bands: 850.125 ~ 930.125MHz
- Receive Sensitivity: [email protected] (On-air)
- Interface: UART
- Range: 5KM(Sunny day; open area; Antenna: AUX 5dBi, Height 2.5m; Air Speed: 2.4kbps)
SKU: 968494 -
Raspberry Pi Hats
Waveshare SX1262 LoRa HAT for Raspberry Pi 868MHz Frequency Band
SKU: 968493- SX1262 LoRa module
- 74HC125V:Â voltage level translator
- CP2102:Â USB TO UART converter
- Working bands: 850.125 ~ 930.125MHz
- Receive Sensitivity: [email protected] (On-air)
- Interface: UART
- Range: 5KM(Sunny day; open area; Antenna: AUX 5dBi, Height 2.5m; Air Speed: 2.4kbps)
SKU: 968493 -
Raspberry Pi Hats
Waveshare SIM7600G-H 4G HAT For Raspberry Pi, LTE Cat-4 4G / 3G / 2G Support
SKU: 968492- LTE Cat-4, 3G, 2G Frequency Bands.
- LTE Cat-4: Up To 50Mbps (Uplink) / Up To 150Mbps (Downlink).
- 3G (HSPA+): Up To 5.76Mbps (Uplink) / Up To 42Mbps (Downlink).
- MP2128DT, MP1482 power chip
- NAU8810 audio decoder
- TXS0108EPWR voltage translator
- Satellite Bands: GPS/Beidou/GLONASS.
- Supports echo cancellation, noise reduction.
SKU: 968492 -
-
Raspberry Pi Hats
Waveshare Pioneer600 Raspberry Pi Expansion Board
SKU: 968484- Onboard CP2102:Â USB TO UART converter
- 0.96-Inch OLED Display
- PCF8591 :Â 8-bit AD/DA converter, I2C interface
- BMP180:Â pressure sensor, I2C interface
- PCF8574:Â I/O expansion chip, I2C interface
- DS3231:Â high precision RTC chip, I2C interface
- LFN0038K IR receiver
SKU: 968484 -
-
Raspberry Pi Hats
Waveshare Pico-RTC-DS3231 IC Test Board
SKU: 979552- Operating voltage: 3.3V
- Backup battery voltage: 2.3V~5.5V
- Operating temperature: -40°C ~ 86°C
- Real-Time Clock Counts Seconds, Minutes, Hours, Date of the Month, Month, Day of the Week, and Year with Leap-Year
- Optional format: 24-hour OR 12-hour with an AM/PM indicator
- 2x programable alarm clock
SKU: 979552 -
Raspberry Pi Hats
Waveshare 3 Channel Relay HAT Smart Home for Raspberry Pi 3
SKU: 975690- Standard Raspberry Pi 40PIN GPIO extension header, supports Raspberry Pi series boards
- High-quality relays, loads up to 5A 250V AC or 5A 30V DC
- Photo coupling isolation, prevent interference from high voltage circuit
- Onboard LEDs for indicating relays status
SKU: 975690 -
-
Raspberry Pi Hats
ZYMKEY4 – Security Module for Raspberry Pi & NVIDIA Jetson
SKU: 972622- Encrypted root file system
- Secure key storage and generation
- Physical tamper detection – perimeter breach, accelerometer
- Measures and authenticates the identity of a host device
- Supports TLS client certificates and digital signatures
- Precision Real-Time Clock, battery-backed
SKU: 972622 -
Raspberry Pi Hats
Waveshare USB to Serial Port Expansion Board HUB
SKU: 890246- 4 USB Ports, Compatible with USB2.0/1.1
- Onboard USB to UART, with enable/disable switch, convenient for Raspberry Pi serial debugging and avoiding conflict
- Onboard multi indicators, for monitoring the status of power, USB to UART, and each USB port
SKU: 890246 -
GPRS and GSM Modules, Raspberry Pi Hats
Waveshare GSM/GPRS/GNSS/Bluetooth HAT for Raspberry Pi
SKU: 890192- Support GPS, COMPASS, Glonass, LBS Base Station Positioning, Omni-Positioning
- Bluetooth 3.0, Supports Data Transferring Through Bluetooth
- Onboard USB To UART Converter CP2102 for UART Debugging
- Compatible With Raspberry Pi Model Zero,3B/3B+,4
SKU: 890192 -
-
-
-