Categories

DC motor driver

  • 16-Channel 12-bit PWM/Servo Driver I2C interface PCA9685 for Arduino Raspberry Pi

    SKU: 43740
     350.00

    (inc GST)

    ₹ 296.61 (+18% GST extra)

    1. Adjustable frequency PWM up to about 1.6 KHz
    2. 12-bit resolution for each output – for servos, that means about 4us resolution at a 60Hz update rate
    3. Configurable push-pull or an open-drain output
    4. The output enable pin to quickly disable all the outputs
    5. Terminal block for power input
    6. Reverse polarity protection on the terminal block input
    7. Green power-good LED
    Add to cart
  • 20A PWM DC Motor Speed Regulator Module (9V, 12V, 24V, 36V, 48V, 60V)

    SKU: 51649
     590.00

    (inc GST)

    ₹ 500 (+18% GST extra)

    1. Adjustable speed range: 0%-100%.
    2. Speed adjustment way: Potentiometer.
    3. Output voltage: Linear under load.
    4. Speed control type: Basins.
    5. Output voltage: Load Linear
    6. Type: Adjusting flow
    7. The motor running condition adjustment: Forward  / Stop / Reverse
    Add to cart
  • 5-36v Switch Drive High-power MOSFET Trigger Module

    SKU: 52812
     150.00

    (inc GST)

    ₹ 127.12 (+18% GST extra)

    This 5-36v Switch Drive High-power MOSFET Trigger Module can control the output of power equipment, motors, light bulbs, LED lights, DC motors, micro-pumps,  solenoid valves, PWM, motor speed control, lamp brightness. etc.

    Add to cart
  • Cytron 2Amp Motor Driver Shield

    SKU: 16014
     829.00

    (inc GST)

    ₹ 702.54 (+18% GST extra)

    1. Logic control, 5V from Arduino main board
    2. Polarity protection for External motor power input
    3. 2 fast test buttons for each motor channel
    4. Motor Driven Voltage:6.5 to 12VDC(VIN Power Supply), 5.0 to 26VDC (External Power Source)
    5. Up to 2A current each channel
    6. Pin 4, 5,6,7 are used to drive two DC motor
    7. Support PWM speed control
    8. Support  advance speed control
    Add to cart
  • Cytron Driver HAT-MDD10

    SKU: 29670
     1,890.00

    (inc GST)

    ₹ 1601.69 (+18% GST extra)

    1. Support motor voltage ranges from 6VDC to 24VDC.
    2. Onboard the test button for manual control of the motor.
    3. Every channel output built with LED indicator.
    4. Current limiting at 30A.
    5. Operating Voltage(VDC): 6 to 24
    6. Peak Current (A): 30 (10 seconds)
    7. Continuous Current (A): 10
    8. No. of Channels: 2
    9. Operating Modes: PWM (Lock-Antiphase and Sign-Magnitude): Yes, UART: No, Analog:No, RC Servo Signal: No
    Add to cart
  • Cytron Dual channel 10A Motor Driver UNO Robot Controller

    SKU: 49866
     2,510.00

    (inc GST)

    ₹ 2127.12 (+18% GST extra)

    1. Onboard 1A (maximum) 5V voltage regulator.
    2. Onboard 500mA (maximum) 3.3V voltage regulator.
    3. 0-5V digital outputs with 3.3V compatible inputs.
    4. 14 Digital I/O Pins (6 PWM outputs).(4 pin used for Motor driver)
    5. 6 Analog Inputs (Can be digital I/O too).
    6. Maximum current up to 10A continuous and 30A Peak.
    7. ISP 6-pin Header.
    8. 32k Flash Memory.
    9. 16MHz Clock Speed.
    10. R3 Shield Compatible.
    Add to cart
  • Cytron FD04A 4-Channel Motor Driver

    SKU: 16010
     2,362.00

    (inc GST)

    ₹ 2001.69 (+18% GST extra)

    1. Industrial grade PCB.
    2. Vmotor: 7 V to 25 V DC.
    3. Each component is soldered properly and tested.
    4. Able to drive 4 DC motor at 2.5A (peak), 1.5A continuously.
    5. 2 LEDs as a direction indicator for each motor.
    6. 1 LED as a power indicator.
    7. A pluggable connector for more user-friendly design.
    8. Fully compatible with Cytron DIY project, Flexibot – Using Transwheel (PR19).
    Add to cart
  • CYTRON SMART DRIVE MDDS30 DUAL 30A (80A Peak)

    SKU: 29672
     5,490.00

    (inc GST)

    ₹ 4652.54 (+18% GST extra)

    1. Battery low voltage indicator.
    2. Battery over voltage indicator.
    3. Thermal protection.
    4. Current limit protection.
    5. Bi-directional control for dual brushed DC motor.
    6. Support motor voltage from 7V to 35VDC.
    7. Dimension: 103 x 97 x 40 (LxWxH) mm.
    Read more
  • Cytron SmartDriveDuo-60 MDDS60 60A (100A peak)

    SKU: 8014
     12,064.00

    (inc GST)

    ₹ 10223.73 (+18% GST extra)

    1. DC Brush motor Driver, not for brushless motor
    2. Input Voltage (Motor): 7 – 45VDC
    3. Two manual/test buttons for each channel.
    4. Two output indicator LEDs for each channel.
    5. Suitable for combat or sumo robot.
    6. Battery Low Voltage Monitoring Mode
    Add to cart
  • DC Motor PWM Speed Regulator 1.8V, 3V, 5V, 6V, 12V-2A speed control switch function

    SKU: 12267
     240.00

    (inc GST)

    ₹ 203.39 (+18% GST extra)

    1. Input supply voltage: 1.8V- 15V DC.
    2. The maximum output power: 30W
    3. Output current : 2A(Max).
    4. With resettable fuse.
    5. Equipped with LED indicator.
    6. Potentiometer with switch function for PWM adjustment.
    Add to cart
  • Dual Monster Moto Shield VNH2SP30 DC Motor Driver 2x14A (Peak 30A)

    SKU: 28535
     699.00

    (inc GST)

    ₹ 592.37 (+18% GST extra)

    1. Voltage Max: 16V
    2. Maximum current rating: 30 A
    3. Practical Continuous Current: 14 A
    4. Current sensing available to Arduino analog pin
    5. MOSFET on-resistance: 19 mΩ (per leg)
    6. Maximum PWM frequency: 20 kHz
    7. Thermal Shutdown
    8. Undervoltage and Overvoltage shutdown.
    Add to cart
  • IRF520 MOSFET Driver Module For Arduino ARM Raspberry pi

    SKU: 44050
     110.00

    (inc GST)

    ₹ 93.22 (+18% GST extra)

    1. Voltage: 3.3 – 5V.
    2. Ports: Digital Level.
    3. Output load voltage: 0-24 V.
    4. Output load current: <5A (1A above need to add heat sink).
    5. Platform: Arduino, MCU, ARM, raspberry pi.
    6. Using original IRF520 Power MOS, you can adjust the output PWM
    Add to cart
  • L298N Dual H Bridge DC/Stepper Motor Driver Controller Module

    SKU: 51971
     199.00

    (inc GST)

    ₹ 168.64 (+18% GST extra)

    1. Driver chip: L298N Dual H Bridge
    2. Supply voltage: VMS 5V – 35V
    3. Peak current IO: 2A per bridge
    4. Max power consumption: 20W
    5. Provides 4 LEDs that reflect the state of the control logic
    6. Independent direction, speed, and braking for each motor
    Add to cart
  • MD13S 13Amp DC Motor Driver – GROVE Compatible

    SKU: 24027
     891.00

    (inc GST)

    ₹ 755.08 (+18% GST extra)

    1. Support motor voltage ranges from  6V to 30V
    2. Maximum current up to 13A continuous and 30A peak (10 seconds).
    3. GROVE compatible
    4. 3.3V and 5V logic level input.
    5. SMD compatible
    6. Peak Current (A): 30 (10 seconds)
    7. Continuous Current (A): 1
    8. No. of Channels: 1
    Add to cart
  • Monster Moto Shield VNH2SP30 Motor Driver 14A (Peak 30A)

    SKU: 28546
     349.00

    (inc GST)

    ₹ 295.76 (+18% GST extra)

    1. Voltage Max: 16V
    2. Maximum current rating: 30 A
    3. Practical Continuous Current: 14 A
    4. Current sensing available to Arduino analog pin
    5. MOSFET on-resistance: 19 mΩ (per leg)
    6. Maximum PWM frequency: 20 kHz
    7. Thermal Shutdown
    8. Undervoltage and Overvoltage shutdown.
    Read more
  • SmartElex 10D DC Motor Driver HAT for Raspberry Pi

    SKU: 128421
     1,189.00

    (inc GST)

    ₹ 1007.63 (+18% GST extra)

    1. Wide 6V to 28V motor Operating Voltage.
    2. Continuous 10A maximum current without Heatsink and 30A peak current for 10 Seconds.
    3. Two brushed DC motor Bidirectional control.
    4. Current limiting at 35A.
    5. PWM frequency up to 32KHz
    6. Support TTL PWM from the microcontroller
    7. Internal thermal shutdown
    8. Under-voltage lockout
    9. PWM and direction controlled driving of four externally powered NMOS transistors
    10. 3V and 5V logic level input.
    Add to cart
  • SmartElex 10D Motor Driver for Arduino UNO

    SKU: 198176
     1,790.00

    (inc GST)

    ₹ 1516.95 (+18% GST extra)

    1. Onboard 5V 3A Buck Converter.
    2. Continuous 10A maximum current without Heatsink and 30A peak current for 10
    3. Two brushed DC motor Bidirectional control.
    4. Current limiting at 35A.
    5. PWM and direction controlled driving of four externally powered NMOS transistors
    Add to cart
  • SmartElex 10S DC Motor Driver HAT

    SKU: 103711
     749.00

    (inc GST)

    ₹ 634.75 (+18% GST extra)

    1. Wide 6V to 28V motor Operating Voltage.
    2. One brushed DC motor Bidirectional control.
    3. Current limiting at 35A.
    4. PWM frequency up to 32KHz
    5. Support TTL PWM from the microcontroller
    6. Internal thermal shutdown
    7. Under-voltage lockout
    Add to cart
  • SmartElex 15D Dual Channel DC Motor Driver

    SKU: 55900
     1,449.00

    (inc GST)

    ₹ 1227.97 (+18% GST extra)

    1. Supply Voltage: 6.8-30 VDC.
    2. Continuous Current: 13 Amp.
    3. PWM Frequency: 20 KHz.
    4. Current limiting at 30A.
    5. 3V and 5V logic level input.
    Add to cart
  • SmartElex 15S DC Motor Driver 15A (30A Peak)

    SKU: 47993
     750.00

    (inc GST)

    ₹ 635.59 (+18% GST extra)

    1. Supply Voltage: 6.8-30 VDC.
    2. Continuous Current: 15 Amp.
    3. PWM Frequency: 20 KHz.
    4. Max Peak current: 30 Amp(For 10 Seconds).
    5. One brushed DC motor Bidirectional control.
    Add to cart
  • TB6600 stepper motor Driver Controller 4.5A 8~50V TTL 16 Micro-Step CNC Single-Axis

    SKU: 49111
     680.00

    (inc GST)

    ₹ 576.27 (+18% GST extra)

    1. Supply Voltage:  8V – 50V DC (36V recommended).
    2. Output current: 0.3A – 4.5A (peak value of 5A).
    3. Micro Step: 1, 2, 8, 16.
    4. Maximum PWM frequency: 200kHz.
    5. Adjustments for the maximum current of the LED: 1A, 2.2A, 3.3A, 4.5A.
    6. Operating temperature: -10 to + 45 ° С.
    Add to cart
  • TB6600 Stepper Motor Driver Controller 4A 9~42V TTL 16 Micro-Step CNC 1 Axis

    SKU: 43211
     690.00

    (inc GST)

    ₹ 584.75 (+18% GST extra)

    1. Input Current: 0~5A
    2. Output Current: 0.5~4.0A
    3. Control Signal: 3.3~24V
    4. Power (MAX): 160W
    5. Micro Step: 1, 2/A, 2/B, 4, 8, 16, 32
    6. Temperature: -10~45℃
    7. H bridge bipolar constant current drive.
    Add to cart
  • Sabertooth Dual 60A Motor Driver

    SKU: 4704
     15,645.00

    (inc GST)

    ₹ 13258.47 (+18% GST extra)

    1. 60A continuous, 120A peak per channel
    2. 6-30V nominal, 33.6V absolute maximum
    3. Synchronous regenerative drive
    4. Ultra-sonic switching frequency
    5. Thermal and overcurrent protection
    6. Lithium protection mode
    Read more
  • Sabertooth Dual 32A Motor Driver

    SKU: 4702
     9,439.00

    (inc GST)

    ₹ 7999.15 (+18% GST extra)

    1. 32A continuous, 64A peak per channel
    2. 6-30V nominal, 33.6V absolute maximum
    3. Synchronous regenerative drive
    4. Ultrasonic 30 kHz switching frequency
    5. Thermal and overcurrent protection
    6. Battery protection mode
    7. USB control and monitoring
    8. USB serial converter mode for Kangaroo x2
    9. Configurable current limiting
    10. Custom user modes
    11. 12-bit motor outputs
    Read more
  • Sabertooth Dual 25A Motor Driver

    SKU: 4698
     9,082.00

    (inc GST)

    ₹ 7696.61 (+18% GST extra)

    1. 25A continuous, 50A peak per channel
      6-30V nominal, 33.6V absolute maximum
    2. Synchronous regenerative drive
    3. Ultra-sonic switching frequency
    4. Thermal and overcurrent protection
    5. Lithium protection mode
    6. Input modes: Analog, R/C, simplified serial, packetized serial
    Read more
  • Sabertooth Dual 12A Motor Driver for R/C

    SKU: 4695
     4,504.00

    (inc GST)

    ₹ 3816.95 (+18% GST extra)

    1. Synchronous regenerative drive
    2. Ultra-sonic switching frequency
    3. Thermal and overcurrent protection
    4. Lithium protection mode
    5. Dual motor driver
    6. Ultra-sonic switching frequency
    7. 1 Amp Switching BEC
    Read more
  • Sabertooth Dual 12A Motor Driver

    SKU: 4692
     5,554.00

    (inc GST)

    ₹ 4706.78 (+18% GST extra)

    1. 12A continuous, 25A peak per channel Up to 24V in
    2. Synchronous regenerative drive
    3. Ultra-sonic switching frequency
    4. Thermal and overcurrent protection
    5. Lithium protection mode
    6. Peak Current (A): 25A
    7. Continuous Current (A): 12
    8. Operating Voltage(VDC): 18 to 24V
    9. No. of Channels: 2
    Read more
  • Sabertooth Dual 5A Motor Driver for R/C

    SKU: 4689
     4,189.00

    (inc GST)

    ₹ 3550 (+18% GST extra)

    1. Operating Voltage(VDC): 6-18
    2. Peak Current (A): 10
    3. Continuous Current (A): 5
    4. No. of Channels: 2
    5. Synchronous regenerative drive
    6. Ultra-sonic switching frequency
    7. Thermal and overcurrent protection
    8. Lithium protection mode-compatible with: 6-12 cell NiMH or NiCd, 2s-4s LiPo, 6V or 12V lead acid (not 18+V lead acid!)
    Add to cart
  • Sabertooth Dual 5A Motor Driver

    SKU: 4686
     4,189.00

    (inc GST)

    ₹ 3550 (+18% GST extra)

    1. Input Voltage: 6V to 18V
    2. Compatible with: 6-12 cell NiMH or NiCd, 2s-4s LiPo
    3. 5A continuous per channel, 10A peak
    4. Synchronous regenerative drive
    5. Ultra-sonic switching frequency
    6. Thermal and overcurrent protection
    7. Lithium protection mode
    Add to cart
  • Cytron SmartDriveDuo-10 MDDS10 DC MOTOR DRIVER

    SKU: 4565
     3,937.00

    (inc GST)

    ₹ 3336.44 (+18% GST extra)

     

    1. Single power operation
    2. Dual Channels means it can drive two brush motor independently, or mixed.
    3. Support Signed magnitude and Locked Anti-phase in PWM mode.
    4. Two manual/test buttons for each channel.
    5. Two output indicator LEDs for each channel.
    6. Power, Error indicator, RUN status (Left and Right) LEDs
    7. On board reset button to restart the MCU after changing operation mode.
    8. Operating modes: RC (RC servo signal), Analog, PWM, simplified and packetized UART.
    Add to cart
  • Cytron Dual Channel Enhanced 13Amp DC Motor Driver 30A Peak MDD10A

    SKU: 3405
     1,890.00

    (inc GST)

    ₹ 1601.69 (+18% GST extra)

    1. Bi-directional control of 2 brushed DC motor.
    2. Support motor voltage ranges from 5V to 25V.
    3. Maximum current up to 13A continuous and 30A peak (10 seconds) for each channel.
    4. Solid state components provide faster response time and eliminate the wear and tear of the mechanical relay.
    5. Fully NMOS H-Bridge for better efficiency and no heat sink is required.
    Add to cart
  • Cytron MDS160A SmartDrive160 160AMP Dc Motor Driver (Peak 190Amp)

    SKU: 2784
     19,845.00

    (inc GST)

    ₹ 16817.8 (+18% GST extra)

    1. Bi-directional control for a single brushed DC motor.
    2. Support input voltage from 8V to 28V.
    3. Maximum current up to 190A peak (1 minute), 175A (2 minutes) or 160A (continuously).
    4. 16 KHz switching frequency for quiet operation.
    5. LiPo battery low voltage warning.
    6. Thermal protection.
    Add to cart
  • Cytron Enhanced 13Amp DC Motor Driver 30A peak (10 seconds) MD10C

    SKU: 2777
     1,039.00

    (inc GST)

    ₹ 880.51 (+18% GST extra)

    1. Bi-directional control of 1 brushed DC motor.
    2. Support motor voltage ranges from  5V to 25V.
    3. Maximum current up to 13A continuous and 30A peak (10 seconds).
    4. 3.3V and 5V logic level input.
    5. Solid state components provide faster response time and eliminate the wear and tear of the mechanical relay.
    6. Fully NMOS H-Bridge for better efficiency and no heat sink is required.
    Add to cart
  • Cytron 30Amp DC Motor Driver (Peak 80Amp) MD30C R2

    SKU: 2774
     3,045.00

    (inc GST)

    ₹ 2580.51 (+18% GST extra)

    1. Bi-directional control of 1 brushed DC motor.
    2. Motor Voltage: 5V – 25V.
    3. Maximum Current: 80A peak (1 second), 30A continuously.
    4. Reverse polarity protection.
    5. 3.3V and 5V logic level input.
    6. Fully NMOS H-Bridge for better efficiency and no heat sink is required.
    Add to cart